Directional Boring Reddit: What Contractors and Homeowners Really Say
People add the word Reddit to a search when they want unfiltered answers from real people instead of marketing. For directional boring the honest answers are spread across r/DIY, r/Construction, r/electrical, r/Plumbing, r/Irrigation, r/Turfmanagement and r/lowvoltage. This page pulls the recurring themes together, links to the threads so you can read them yourself, and points to r/DirectionalBoring, the subreddit dedicated to this work.

Quick answer
Reddit’s consensus on directional boring is consistent: it is real, it is how most lines get under pavement today, short residential bores are priced mostly on mobilization rather than footage, DIY water boring fails in clay, and the contractor you want is the one who insists on 811 locates and potholes the crossings. The threads below are where those opinions come from.
What Reddit says about directional boring cost
The most repeated point across homeowner threads is that a short bore is mostly a mobilization charge. Once the rig and crew are on site, additional footage is cheap, which is why several commenters advise pricing the whole run instead of only the driveway crossing. In the r/DIY thread about a half DIY 200 amp underground service, the homeowner planned to hire a boring company only for the driveway, and the advice was to get the full run quoted before trenching the rest by hand.
Boring vs trenching on Reddit
In r/Construction, a homeowner asked whether trenchless was real or a sales tactic for running power to a shed. The replies explain the method: a steerable pilot hole from a small entry pit, a locator tracking the head, then reaming and pullback, with the lawn untouched except at the pits. Golf course superintendents in r/Turfmanagement compared boring and trenching for irrigation mains, with frac-out control and depth under play areas as the main concerns. Trinity’s own comparison is at trenching vs boring.
DIY boring under a driveway: what goes wrong
Two threads show the pattern. In r/DIY, a water boring attempt under a 15 foot driveway kept stalling in red clay. In r/Irrigation, a drip line bore under a 12 foot sidewalk collapsed. The consistent advice: clay swells and grabs the pipe without circulating fluid, loose soil will not hold an open hole, and driving EMT conduit as a sleeve works about half the time. The other half, a contractor does the crossing in under an hour on site.
Electrician or boring contractor?
In r/electrical, a homeowner asked whether to call an electrician or a specialist to run power under a driveway. The practical answer from the thread: most electricians sub the bore out and mark it up, so hiring the electrician for the electrical and a boring contractor directly for the crossing can save money. Ask for a sleeve one size up and sweeping bends rather than sharp 90s so the wire pulls easily. Fiber installers got the same answer in r/lowvoltage about burying conduit through a sidewalk: you do not need a general contractor, you need a boring sub.
Pulling new pipe through old pipe
A r/Plumbing thread on pulling PEX through old galvanized under a sidewalk drew warnings that scaled galvanized has half the inside diameter you expect and can snap mid pull. With known utilities crossing the path, a short directional bore on a new path a couple of feet over was the recommended fix.
How directional drilling is steered
A viral r/Damnthatsinteresting video of horizontal drilling under a street produced a clear explanation: the head has a slanted face, pushing without rotating steers it toward the clock position of that face, and a locator above ground reads depth and pitch every rod. Commenters also raised cross bore damage, which is exactly why 811 and potholing matter.
Where directional boring people talk now
Those threads are scattered and most are archived after six months. r/DirectionalBoring is the subreddit built for this trade, with a wiki covering the FAQ, an HDD glossary, how to hire a boring contractor and what drives pricing. For live conversation with working crews, join Directional Boring HQ on Discord. Both are hosted by Trinity Boring Solutions and open to everyone.
Need a bore in Oklahoma or North Texas?
Trinity Boring Solutions installs fiber, electric, water, gas and sewer lines by directional boring across Oklahoma and North Texas. Call (405) 409-7423 or request a quote.
FAQ
What does Reddit say directional boring costs?
Threads agree that short residential bores are priced mostly on mobilization, so the per foot rate looks high on a 15 to 40 foot crossing and drops fast on longer runs. Get quotes that state what is included.
Does Reddit recommend DIY boring under a driveway?
Mostly no. Water boring stalls in clay and open holes collapse in loose soil. Driving EMT as a sleeve is the one DIY method with a reasonable success rate on very short crossings.
Which subreddit is for directional boring?
r/DirectionalBoring, hosted by Trinity Boring Solutions, with a live companion community on Discord.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.