trinityboringsolutions.com

Trinity Boring Solutions does directional boring in Oklahoma City, OK, about 13 road miles from its Yukon headquarters, and answers (405) 409-7423 around the clock.

Trinity Boring Solutions directional boring crew on an Oklahoma utility job

Directional Boring and Road Bore Contractor in Oklahoma City, Oklahoma

Trinity Boring Solutions Inc. does directional boring, road bores and underground utility installation in Oklahoma City, OK for water, sewer, natural gas and propane, electric and fiber. The company has been family owned since 1965, has done underground construction since 1982, and sends its own crews and rigs from 9102 Northwest Expy, Yukon, OK 73099. Call (405) 409-7423, answered 24 hours a day.

24/7 Emergency Directional Boring in OKC HDD · Trenching · Hydro-Vac Water · Sewer · Gas · Electric · Fiber Residential · Commercial · Industrial · Municipal Street, Interstate & Railroad Crossings
Trinity Boring Solutions directional boring crew on an Oklahoma utility job

Trinity Boring Solutions at a glance

  • Serves Oklahoma City. Oklahoma City Hall is about 13 road miles and roughly 22 minutes from 9102 Northwest Expy in Yukon by the Northwest Expressway, so an Oklahoma City job can have a crew the same day.
  • Since 1965. Family owned. Dean Rice started the company in 1965 as an irrigation contractor, and it has done underground construction since 1982. Today Trinity is a directional boring contractor serving Oklahoma and Texas.
  • Oklahoma City metro based. Headquartered at 9102 Northwest Expy, Yukon, OK 73099, in the Oklahoma City metro. Crews and rigs cover all 77 Oklahoma counties and all of Texas, from Dallas, Fort Worth and Plano down to Houston. Jobs within about four hours of Yukon can have a crew the same day.
  • Owns its equipment. Vermeer and Ditch Witch HDD rigs, auger boring machines and hydrovac trucks, all owned outright and run by Trinity operators.
  • One crew, whole job. 811 locates and hydrovac potholing, horizontal directional drilling, auger boring with steel casing, trenching, backfill and pit restoration from the same company, so there is no handoff between a locator, a driller and an excavator.
  • Range. 3/4 inch service lines to 48 inch pipe, and bores from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, for water, sewer, natural gas and propane, electric and fiber.
  • Named work. A single shot just under 4,000 feet under the Arkansas River; a 48 inch HDPE water intake line out to the middle of Fort Cobb Lake; a bore beneath the John Kilpatrick Turnpike in Oklahoma City (watch the video); 840 feet of FAA conduit under runways at Will Rogers World Airport; 385 foot sandstone rock bore under creeks, a wetland and a dam in Guthrie; 6 inch PVC sleeve under NE 24th Street and a live water main at the Clara Luper Center; propane line on a hospital campus in Anadarko; emergency water line at a Stillwater sorority house.
  • Safety. An Okie811 ticket in Oklahoma, a Texas811 ticket in Texas, and hydrovac potholing on every crossing.
  • 24 hour phone. (405) 409-7423 is answered around the clock, with emergency crews for gas and water lines.

Underground Utility Contractor for Directional Boring and Road Bores in Oklahoma City

Excavator handling large pipe on a Trinity Boring Solutions bore
Trinity Boring Solutions job site photo. (405) 409-7423. Serving all of Oklahoma.

The Census Bureau counted 681,054 people in Oklahoma City in 2020 and estimates 719,849 for 2025, spread over about 606 square miles of land (U.S. Census Bureau QuickFacts). The city Utilities Department runs a water network of roughly 4,300 miles and repaired 1,101 emergency water main breaks in the fiscal year that ended June 30, 2025 (City of Oklahoma City). New services, replacement lines and conduit crossings all have to get past that system, plus OG&E power, Oklahoma Natural Gas and fiber in the same corridors.

Trinity bores and trenches for homeowners, plumbers, electricians, builders and utilities across Oklahoma City, from a single service under a driveway to multiple bores on a commercial site. Common crossings include section line arterials such as Memorial Road, Penn, May and Meridian, and highway corridors along Interstate 35, Interstate 40, Interstate 44 and the John Kilpatrick Turnpike, with the permits and approvals held by the owner or general contractor.

Planning a project or dealing with a utility emergency in Oklahoma City? Call (405) 409-7423 for a plan and a written price.

How Directional Boring, Trenching & Hydro-Vac Solve Oklahoma City Utility Jobs

  • Water and sewer mains under arterial streets, interstates, and new subdivisions where lane closures must be minimized.
  • Fiber and telecom builds for ISPs, carriers, dark fiber providers, and enterprises needing multi-duct conduit, accurate depths, and clean road or rail crossings.
  • Primary and secondary electric, site power, and lighting circuits feeding retail centers, medical campuses, warehouses, and industrial parks across OKC.
  • Campus, school, and hospital utilities where sidewalks, landscaping, and existing tunnels or duct banks must be protected.
  • Emergency bypass bores when a gas or water line fails under a busy street, alley or parking lot and service has to come back quickly.

We combine HDD for crossings and sensitive areas, trenching where open ground makes sense, and hydro-vac for potholing and tight digs in congested utility corridors. That mix lets our Oklahoma City directional boring team handle everything from a single residential service under a driveway to multi-utility corridors and emergency bypass routes serving entire facilities or city blocks.

Need help deciding between boring and trenching on an Oklahoma City project? Call (405) 409-7423.

Directional Boring, Trenching & Hydro-Vac Services in Oklahoma City, OK

Here is how our boring contractors in Oklahoma City and our trenching and hydro-vac crews cover both everyday construction and 24/7 emergencies across the metro.

Water, Sewer & Storm Utility Installation

We bore and trench water services and mains, gravity sewer and force mains under city streets, alleys, creeks and driveways across Oklahoma City. Our crews can install new mains, replace failing segments, or run individual services to homes and businesses, keeping grade where it matters and protecting pavement, sidewalks, and landscaping wherever possible.

Gas, Electric & Underground Site Power

Our team installs gas services, primary and secondary electric, generator and UPS feeds, and site-lighting/light-pole circuits for homes, shopping centers, medical offices, warehouses, and industrial facilities in Oklahoma City. We route conduits around existing utilities, foundations, and parking lots so you get reliable power without tearing up finished surfaces more than necessary.

Fiber, Telecom & Low-Voltage Conduit Banks

Demand for fast internet and connected systems in Oklahoma City keeps growing as new developments and data-heavy businesses come online. We install single and multi-duct conduit banks for fiber and telecom providers, school districts, public safety systems, and private businesses. That includes main routes, laterals to buildings, and drops to individual tenants or houses, plus vaults and handholes where you need access for splicing and maintenance.

Campus, Schools, Parks & Public Facilities

Across Oklahoma City schools, campuses, and parks, we install underground power, communications, irrigation mains, control wiring, and lighting. Work in these environments has to be neat and carefully phased, so we use small footprints, accurate boring, and detailed restoration plans to keep students, staff, and visitors moving safely while upgrades happen behind the scenes.

Hydro-Vac, Potholing & Slot Trenching

Hydro-vac excavation lets us expose existing utilities before we bore or trench, cleanly dig in tight spaces, and slot-trench where a traditional trencher or mini-excavator would cause too much damage or risk. We use hydro-vac around critical gas lines, crowded intersections, industrial plants, and anywhere accuracy and safety are more important than raw production.

Contractor, Utility & Municipal Support

Trinity Boring Solutions also works as a subcontractor to plumbers, electricians, civil and site contractors, and utilities in Oklahoma City. If you are a contractor who needs a reliable HDD, trenching, or hydro-vac partner in OKC, we can take care of the underground scope while you focus on vertical work, plant upgrades, or building systems. We fit into your schedule, documentation requirements, and safety programs so projects run smoothly.

If it goes underground in Oklahoma City, whether water, sewer, gas, power, fiber, irrigation, lighting or a conduit bank, our crews can lay out a bore route, or a mix of bores and trenches, that fits the site. See our water line and gas line services.

Oklahoma City Directional Boring Projects: Neighborhoods, Corridors & Critical Facilities

Oklahoma City work splits into three common job types. Each is planned around traffic, business hours and the utilities already in the ground, so lane closures and downtime stay short.

Residential Directional Boring & Infill Utility Replacement

In older neighborhoods, water, sewer, gas and power services often run under mature trees, sidewalks, alleys and driveways. A bore replaces the line from a small pit at each end, and short trench sections are used only where they are easy to patch.

Ditch Witch boring machine on a residential job in Oklahoma
Trinity Boring Solutions job site photo. (405) 409-7423. Serving all of Oklahoma.

Commercial, Medical & Industrial Underground Utility Corridors

Commercial, hospital and industrial sites along arterials such as the Northwest Expressway, Memorial, Reno, Penn, May and Meridian often need water, sewer, power, communications and lighting conduit in one corridor. These jobs run on tight schedules and inspections, so the crew records depths and locations as it goes and keeps the general contractor current.

Downtown, Bricktown & Core OKC HDD Utility Work

Downtown, Bricktown and the Innovation District pack existing utilities, traffic and pedestrians into narrow corridors. New conduit and replacement segments there are usually bored from small pits after hydrovac potholing, and loud or disruptive work is scheduled around events and peak traffic when possible.

Trinity Boring Solutions utility bore beside a sports field track in Oklahoma
Trinity Boring Solutions job site photo. (405) 409-7423. Serving all of Oklahoma.

Recent Oklahoma City Project: 6 Inch PVC Sleeve Bored Under NE 24th Street and a Water Main

Trinity Boring Solutions bored a 6 inch Schedule 40 PVC sleeve under NE 24th Street and a water main near N Martin Luther King Avenue in northeast Oklahoma City, at the future Clara Luper Civil Rights Center, for the general contractor. Our crew spotted the water main first, then bored under the street and the main from two bore pits with a Ditch Witch JT922.

  • Product: 6 inch Schedule 40 PVC sleeve, pulled back after a 9 inch pre ream
  • Ground: red sandy soil, held open with bentonite drilling fluid
  • Crossing: under NE 24th Street and a water main, with the main spotted first
  • Setup: two bore pits, a Ditch Witch JT922 and a Trinity water trailer

Read the full NE 24th Street PVC sleeve bore case study, or see more Oklahoma City work: the FAA conduit bore at Will Rogers World Airport and the Hobby Lobby headquarters conduit bore. For sleeves, conduit, street crossings and water main crossings in Oklahoma City, call (405) 409-7423.

Directional Boring Service Area Map, Oklahoma City, Oklahoma

Oklahoma City is the anchor of the metro Trinity calls home. Crews work throughout the city and nearby communities, including Yukon, Edmond, The Village, Midwest City, Del City, Moore and Norman, and the county pages for Oklahoma County, Canadian County and Cleveland County cover the rest of the metro.

Oklahoma City at a glance for bore planning

  • County: Oklahoma County, in ODOT District 4 for state highway work.
  • Nearby cities: Yukon, Bethany, The Village, Nichols Hills, Edmond, Midwest City, Del City, Moore and Norman.
  • Highways: Interstate 35, Interstate 40, Interstate 44, Interstate 235, Interstate 240 and the John Kilpatrick Turnpike, shown on the ODOT Oklahoma City map.
  • Waterways: the North Canadian River, Lake Hefner, Lake Overholser and Lake Stanley Draper.
  • Ground: The Oklahoma Geological Survey metro map shows the Hennessey Formation, mostly silty claystone and clay shale with thin sandstone, over the Garber Formation, a friable to moderately hard sandstone with claystone and conglomerate (OGS geologic map). Alluvium and terrace sand sit along the North Canadian River. Expect red clay and shale, with sandstone ledges that call for rock tooling.
  • Drive from Yukon: about 13 road miles and roughly 22 minutes to City Hall at 200 N Walker Avenue by the Northwest Expressway.

Oklahoma City Utility Locating, Safe Digging, Permits and Helpful Links

Every Oklahoma City bore starts with an Okie811 ticket and hydrovac potholing on each crossing. These are the local rules and contacts that shape the schedule.

  • OKIE811, I Want to Dig: okie811.org, I want to dig. Give notice at least 48 hours before digging, not counting the day of notice, Saturdays, Sundays and legal holidays.
  • Oklahoma "Call Before You Dig" Info: Call Before You Dig, Oklahoma City
  • Oklahoma Natural Gas, Safe Digging: Call Before You Dig. If you smell gas, leave the area and call 911 and 800.458.4251.
  • OG&E, Electric Service in OKC: OG&E. The city lists OG&E at 405.272.9741 and Oklahoma Natural Gas at 405.551.4000 (city helpful phone numbers).
  • City of Oklahoma City Utilities (App): My OKC Utilities. Report a water main or service line break to the 24/7 Water Dispatch Center at 405.297.2833 (city water page).
  • Bore permits: Oklahoma City Public Works issues bore and paving cut permits in the right of way only to a prequalified contractor who performs the work, through the ACA Citizen Access portal. The application needs a site plan with the cross street, alignment and bore depth, and the customer obtains plumbing or manhole tap permits (bore and paving cut permit). Work zone permits are due two full workdays ahead (Public Works contractor resources). The owner or general contractor arranges the permit and traffic control; Trinity bores to the approved plan.
  • Highways and turnpikes: Interstate and state highway crossings need ODOT approval, and work on the John Kilpatrick Turnpike or Turner Turnpike right of way needs Oklahoma Turnpike Authority approval.
  • Public Service Company of Oklahoma: PSO, the electric utility for Trinity jobs in other parts of the state such as Broken Arrow.
  • Trinity, 24/7 Emergency Boring: Underground Utility Emergency Services

More on locates and depth: 811 utility locating, utility depth and potholing and road and highway utility work.

Information We Need to Quote Any Oklahoma City Directional Boring Job

  • Oklahoma City address or nearest intersection, or the facility or campus name.
  • Utility type: water, sewer, natural gas or propane, electric or fiber.
  • Pipe or conduit size and material, such as HDPE, PVC or steel casing.
  • Length of each bore and where it starts and ends.
  • Required depth, or the slope a gravity sewer has to hold.
  • Known rock, sandstone ledges, groundwater or creek crossings.
  • Room for entry and exit pits and for the rig, and any outage or shutdown windows.
  • Plans, a sketch or photos from both ends of the route.
  • Permit and locate status: who holds the city bore permit, whether ODOT or the Oklahoma Turnpike Authority is involved, and any open Okie811 ticket number.

For a written price from our Oklahoma City boring crew, call (405) 409-7423.

Other Trinity Boring Directional Drilling Services in Oklahoma

If you are researching directional boring in Oklahoma City, you may also need help with related underground utility services across Oklahoma. These pages explain more about how our crews handle specific scopes and emergency situations.

Oklahoma City Directional Boring & Underground Utility FAQs

These frequently asked questions explain how our crews handle design, installation, emergencies, pricing, and coordination for underground utility work across the metro.

1) What underground utilities can your boring crews install in Oklahoma City?

Water services and mains, gravity sewer and force mains, natural gas and propane lines, primary and secondary electric conduit, low voltage and control conduit, fiber and telecom duct, and irrigation mains. Sizes run from 3/4 inch service lines to 48 inch pipe. On many Oklahoma City sites several of these go in during the same mobilization, so the owner gets one organized corridor instead of a patchwork of separate bores and trenches.

2) How does your 24/7 emergency directional boring service work in Oklahoma City?

Call (405) 409-7423 at any hour; the phone is answered around the clock and Trinity runs emergency crews for gas and water lines. Oklahoma City is about 22 minutes from Yukon by road. City water and sewer main breaks go to the city 24/7 Water Dispatch Center at 405.297.2833. For a private line, Trinity locates what is nearby, bores a bypass or replacement, and your plumber or the line owner moves service over.

3) How do you coordinate Oklahoma City directional boring projects with the city and utilities?

The owner or general contractor holds the permits and the traffic control plan, and Trinity bores to the approved plan. Before work, the crew reviews the plans and the inspection points with the project manager. During the job it reports where it is working and what is done, and afterward it provides depths, locations and field changes so the record drawings stay accurate.

4) When is directional boring better than open-cut trenching for Oklahoma City utilities?

Boring is the better choice when the line crosses a paved street, an interstate, a busy driveway, sidewalks, mature trees or anything you want left in place; it needs only an entry and exit pit. Trenching still makes sense in open ground and new construction sites with room to dig. Most Oklahoma City jobs use both: a bore at each crossing and a trench along the straight, open runs.

5) Can you keep proper slope on gravity sewer and storm drains when you use HDD?

Yes, within limits. Gravity sewer is bored to the line and grade on the plan, with depth checked along the run. Short bores can hold slope closely; longer runs may be split into segments with intermediate pits. Inverts are confirmed at the manhole or tie in point so the pipe flows as designed. When the required grade is too flat to steer reliably, an auger bore with steel casing is the better tool.

6) How do you price a directional boring or trenchless utility job in Oklahoma City?

On the length of each bore, the pipe or conduit size and material, the clay, shale and sandstone along the route, how many crossings, required depth, how much hydrovac potholing the route needs, pit space and restoration. There is no flat footage rate. Send the address or nearest intersection, the utility, the rough length and what the bore crosses, and you get one written number that lists what is included.

7) Do you work directly for Oklahoma City homeowners and small businesses?

Yes. Many Oklahoma City jobs come through plumbers, electricians and general contractors, and Trinity also takes calls straight from homeowners, property managers, small businesses and HOAs. A plain description is enough to start, such as a new water line under the driveway or power to a shop behind the house. If the job needs a city permit or inspection, the owner or the trade holding the permit pulls it.

8) What information should I have ready before I call for an Oklahoma City boring quote?

The address or nearest intersection, the utility type, where the line starts and ends, and what it crosses: a street, interstate, driveway, parking lot, creek or open ground. Add the pipe size if you know it, any required depth or slope, room for pits, and whether a permit is already issued. A phone photo with the route drawn on it helps more than people expect.

9) Can you manage projects that have multiple bores and trenches on the same Oklahoma City site?

Yes. A new commercial site might need separate bores for water, sewer and electric under the street, plus trenches inside the property to reach the building. The sequence is potholing first, then the main crossings, then the trenching and tie ins, so each utility keeps its spacing and nothing has to be redone. Trinity handles that whole underground package with one crew.

10) Why choose Trinity Boring Solutions instead of renting an HDD machine in Oklahoma City?

A rented machine does not come with an operator who reads locates every day. Hitting a gas main, fiber trunk or buried power line is dangerous and expensive. Trinity owns its Vermeer and Ditch Witch rigs, potholes every crossing with its own hydrovac trucks after the Okie811 ticket, and adjusts the bore path when the ground or a conflict calls for it. The family company has done underground construction since 1982.

11) Do you do auger boring and jack and bore in Oklahoma City?

Yes. Trinity owns auger boring machines and installs steel casing with them, the method most people call jack and bore. It pushes a casing straight under a road or rail line from a pit on each side and suits gravity sewer and carrier pipes that must hold a set grade. Directional boring is usually the faster choice for water, gas, electric and fiber that can follow a gentle curve.

12) Do you do gas line installation in Oklahoma City?

Yes. Trinity bores natural gas and propane lines, from yard lines and generator feeds to service lines for shops and commercial buildings. Oklahoma Natural Gas is the gas utility listed by the city, and buried piping on the customer side of the meter belongs to the property owner. A licensed plumber or gas fitter makes the final connection, and every crossing is potholed before the drill head passes it.

13) Who do I call before digging in Oklahoma City, and what does 811 cost?

Okie811. Oklahoma requires notice at least 48 hours before digging, not counting the day you call, Saturdays, Sundays and legal holidays. Dial 811 or file online at okie811.org, and each utility marks its lines or reports that it has none. The service costs you nothing. On a Trinity job the crew files the ticket and checks every response before the rig starts.

14) How deep are utility lines buried in Oklahoma City?

There is no single depth. Each utility sets its own standard, streets get rebuilt and yards get regraded, so a line can sit shallower or deeper than any plan shows. Okie811 paint and flags mark where a line runs, not how deep it is. That is why Trinity hydrovac potholes every crossing to see the real depth before the bore passes it.

15) Who pulls the bore permit in Oklahoma City?

Oklahoma City Public Works issues bore permits in the public right of way only to a prequalified contractor who will do the work, through the city ACA Citizen Access portal. The application needs a site plan with the cross street, alignment and bore depth, and the customer gets any plumbing or manhole tap permits. Settle who holds the permit and traffic control with your general contractor before scheduling; Trinity bores to the approved plan.

16) Can you bore under an interstate or the Kilpatrick Turnpike in Oklahoma City?

Yes, with the right approvals. Interstate and state highway crossings need ODOT approval, and Oklahoma County falls in ODOT District 4. Turnpike crossings need Oklahoma Turnpike Authority approval. Trinity has bored beneath the John Kilpatrick Turnpike in Oklahoma City. The owner or general contractor obtains the permit and the traffic control plan, and the crew bores to the approved depth and casing requirements.

Get a Directional Boring, Trenching or Hydro-Vac Quote in Oklahoma City, Oklahoma

Whether you are tying a house into city services, routing fiber to a business, feeding a new commercial site, or supporting large Oklahoma City projects, Trinity Boring Solutions sends its own crews from Yukon, about 22 minutes away, with emergency crews for gas and water lines. Share your route, utilities, and timeline, and we will put together a clear plan, price, and schedule that fits your project.

Directional Boring in Oklahoma City, OK 24/7 Emergency HDD · Trenching · Hydro-Vac Water · Sewer · Gas · Electric · Fiber Residential, Commercial, Industrial & Municipal

Free Bore Planner

Plan Your Bore in Oklahoma City, Oklahoma

Type the address of your job in Oklahoma City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Oklahoma City sits in Oklahoma County, about 13 road miles from our headquarters at 9102 Northwest Expy in Yukon. The 2020 census counted 681,054 residents, and the city’s neighborhoods, commercial corridors and utility easements need underground work that avoids tearing up streets and yards. Bores under Interstate 35 and other highways need ODOT approval, which the owner or general contractor obtains before the crew arrives. Trinity Boring Solutions brings its own drill rigs, auger boring machines and hydrovac trucks to Oklahoma City. Call (405) 409-7423 for a bore quote.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, 3/4 inch service line through 48 inch pipe, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Oklahoma City

Counties: Canadian County directional boring · Cleveland County directional boring. All counties: Oklahoma county list. Oklahoma and Texas: directional boring service area.

Nearby Service Areas in Oklahoma County

Trinity Boring Solutions also provides directional boring and underground utility services near Oklahoma City in: Arcadia · Bethany · Choctaw · Del City · Edmond · Harrah · Luther · Midwest City · Nichols Hills · Spencer · The Village · Woodlawn Park. Call (405) 409-7423 for a quote.