Directional Boring Services in Dallas, TX
Trinity Boring Solutions provides directional boring services in Dallas, TX and across DFW. We install water, sewer, gas, electric and fiber conduit under roads, driveways, parking lots and creeks without open cutting. Our own crews and rigs travel from our office in Yukon, Oklahoma, and one crew handles the whole job: the Texas811 ticket, hydrovac potholing, the bore and pit restoration. Call (405) 409-7423, answered around the clock.
Directional boring in Dallas, answered in one paragraph. Trinity Boring Solutions Inc. is a family business founded in 1965 by Dean Rice and doing underground construction since 1982. Owner Darren Rice runs it from Yukon, Oklahoma. Our own crews bore from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections. We install pipe from 3/4 inch service line through 48 inch pipe. We bore under roads, driveways, parking lots, creeks and existing utilities across Dallas and North Texas, with one crew handling Texas811 locates, hydrovac potholing, the bore, pullback and pit restoration. Call (405) 409-7423, answered 24 hours a day.
Trinity Boring Solutions at a glance
- Serves Dallas. Crews and rigs travel from Yukon, in the Oklahoma City metro. Dallas is about 220 road miles from Yukon, roughly a three and a half hour drive.
- Since 1965. Family owned. Dean Rice started the company in 1965 as an irrigation contractor, and it has done underground construction since 1982. Today Trinity is a directional boring contractor serving Oklahoma and Texas.
- Oklahoma City metro based. Headquartered at 9102 Northwest Expy, Yukon, OK 73099, in the Oklahoma City metro. Crews and rigs cover all 77 Oklahoma counties and all of Texas, from Dallas, Fort Worth and Plano down to Houston. Jobs within about four hours of Yukon can have a crew the same day.
- Owns its equipment. Vermeer and Ditch Witch HDD rigs, auger boring machines and hydrovac trucks, all owned outright and run by Trinity operators.
- One crew, whole job. 811 locates and hydrovac potholing, horizontal directional drilling, auger boring with steel casing, trenching, backfill and pit restoration from the same company, so there is no handoff between a locator, a driller and an excavator.
- Range. 3/4 inch service lines to 48 inch pipe, and bores from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, for water, sewer, natural gas and propane, electric and fiber.
- Named work. A single shot just under 4,000 feet under the Arkansas River; a 48 inch HDPE water intake line out to the middle of Fort Cobb Lake; a bore beneath the John Kilpatrick Turnpike in Oklahoma City (watch the video); 840 feet of FAA conduit under runways at Will Rogers World Airport; 385 foot sandstone rock bore under creeks, a wetland and a dam in Guthrie; 6 inch PVC sleeve under NE 24th Street and a live water main at the Clara Luper Center; propane line on a hospital campus in Anadarko; emergency water line at a Stillwater sorority house.
- Safety. An Okie811 ticket in Oklahoma, a Texas811 ticket in Texas, and hydrovac potholing on every crossing.
- 24 hour phone. (405) 409-7423 is answered around the clock, with emergency crews for gas and water lines.
Common questions about directional boring in Dallas
How much does directional boring cost in Dallas?
There is no flat per foot rate for directional boring in Dallas. Bore length and pipe size set a general range. Soil and rock, what the bore crosses, grade, existing utilities, depth and access set the final number. Send the address, what you need installed and where it has to go, and you get one written number. See how a bore is priced.
What can Trinity bore under in Dallas?
Roads, driveways, sidewalks, parking lots, landscaping, creeks and drainage, and existing utility corridors. Trinity installs water, sewer, natural gas and propane, electric conduit and fiber, from 3/4 inch service line through 48 inch pipe. We call in the Texas 811 ticket and pothole existing utilities with hydrovac before the drill head goes in the ground.
How fast can Trinity Boring Solutions get to Dallas?
Our crews and rigs travel to Dallas from Yukon, Oklahoma, about 220 road miles, or roughly three and a half hours. Jobs within about four hours of Yukon can have a crew the same day. The phone, (405) 409-7423, is answered 24 hours a day, with emergency crews for gas and water lines. Scheduled bores are quoted first. Your permits come from you or your general contractor, and Texas law requires the 811 notice at least 48 hours before digging, not counting weekends and holidays. Once those are in place, the crew shows up ready to bore. Call (405) 409-7423.
Directional Boring Services in Dallas Texas
The Dallas Fort Worth Arlington metro had about 8.5 million people in 2025, according to the U.S. Census Bureau. That growth means new water, sewer, gas, power and fiber lines going under roads that cannot be closed or cut. Trinity Boring Solutions brings directional boring services to Dallas and DFW for utility contractors, general contractors and property owners.
Much of Dallas County sits on Blackland Prairie clay, which shrinks when dry and swells when wet. On a bore, that clay affects how the hole holds open between drilling and pullback, so the drilling fluid and the bore path are planned around it before the job starts.
State highways in Dallas County are run by the TxDOT Dallas District. The Dallas North Tollway is owned and operated by the North Texas Tollway Authority. A utility crossing under either needs a permit from that road owner. The utility owner or your general contractor pulls that permit. Trinity bores the crossing to the approved plan.
Dallas conduit installation: we bore fiber and electric conduit under streets, drives and parking lots so the line goes in without cutting pavement.



Photos from Trinity jobs. The same crews and rigs travel from Yukon, Oklahoma for Dallas and DFW work.
Dallas Texas Boring Services
Highway and Tollway Crossings
Bores under Dallas area state highways and tollways, built to the plan in the permit that the utility owner or general contractor obtains.
Fiber and Electric Conduit
Conduit installation in Dallas for fiber and power under streets, drives and parking lots.
Commercial Utility Boring
Utility service bores for retail centers, office parks, corporate campuses, and mixed-use developments throughout Dallas and suburban DFW. Gas, water, electrical, and communications conduit.
Large Diameter Bores
Pipe up to 48 inches, pulled with our Vermeer D100x140 and its 100,000 pounds of pullback.
Blackland Prairie Clay
Dallas clay shrinks and swells with moisture. We plan the drilling fluid and bore path for it before the job starts.
Multi-Family and Residential
Boring for apartment communities, planned developments, and residential subdivisions throughout the Dallas metro. Gas, fiber, and water crossings for residential developers.
Dallas Project Process
- Texas 811 Locates: Texas law requires the excavator to notify Texas 811 no earlier than 14 days and no later than 48 hours before digging, not counting weekends and legal holidays. We call in the ticket on every Dallas bore and wait for the locates before we dig.
- Permits and Traffic Control: Highway crossings in Dallas need a permit from the TxDOT Dallas District, or from NTTA on a tollway. You or your general contractor pull the permit and handle traffic control. We bore to the approved plan.
- Potholing: We pothole existing utilities with hydrovac so the crew can see them before the drill head passes.
- Travel: Dallas work is done with our own crews from Yukon, Oklahoma and from a satellite yard in Dallas run by a partner drilling contractor Trinity has personally vetted. Dallas is about 220 road miles from Yukon, or roughly three and a half hours, so a Dallas job can have a crew the same day.
- The Bore: We drill the pilot, ream as needed and pull back the pipe. That can be HDPE for water, or PVC for sewer when the job specifies it. A single shot runs up to just under 4,000 feet, and longer runs are bored in sections with a pit between shots.
Why Choose Trinity Boring Solutions for Dallas Projects
Dallas utility contractors and general contractors call us for a family company with its own crews and its own rigs, up to a Vermeer D100x140. We have bored a single shot of just under 4,000 feet under the Arkansas River, and 840 feet of FAA conduit under runways at Will Rogers World Airport. The crew you talk to on the phone is the crew that does the work.
See our Fort Worth Texas boring page, our North Texas and DFW boring page, our Austin Texas boring services, and our main Oklahoma directional boring page. For trenchless technology standards, visit NASTT and NUCA.
Dallas Metro Area Coverage
We take directional boring jobs across DFW, including Dallas, Plano, Irving, Garland, Mesquite, Grand Prairie, Carrollton, Richardson, Farmers Branch, Addison, Allen, Frisco and McKinney. Our crews travel from Yukon, Oklahoma.
Map of Dallas, Texas
Directional boring service area map for Dallas, Texas. Call (405) 409-7423 with the address or cross streets of your bore.
Free Bore Planner
Plan Your Bore in Dallas, Texas
Type the address of your job in Dallas. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Frequently Asked Questions
What makes Dallas clay soils challenging for directional boring?
Much of Dallas County sits on Blackland Prairie clay that swells when wet and shrinks when dry. On a bore, that changes how well the hole stays open between drilling and pullback. We plan the drilling fluid and bore path for the clay before the job starts, and we pothole existing utilities first so we know what is in the way.
Do you handle TxDOT Dallas District encroachment permits?
No. Trinity does not pull permits. The TxDOT Dallas District covers Collin, Dallas, Denton, Ellis, Kaufman, Navarro and Rockwall counties. A utility crossing under a state highway there is permitted by the utility owner, or by the general contractor on its behalf. Start the permit early. Once it is approved, we bore the crossing to the permit plan.
Can you bore under the Dallas North Tollway or LBJ Freeway?
Yes, once the crossing is permitted. The Dallas North Tollway is owned and operated by the North Texas Tollway Authority, so a crossing under it is permitted through NTTA. A crossing under a state highway is permitted through TxDOT. You or your general contractor pull the permit and set up traffic control, and we bore to the approved plan.
Can you bore fiber conduit for Dallas data center projects?
Yes. We bore fiber and power conduit under roads, drives and parking lots. Our largest rig, a Vermeer D100x140 with 100,000 pounds of pullback, handles long runs and large pipe up to 48 inches. Send the site plan and conduit count, and we will tell you on the call what the bore takes.
Do you serve Plano, Frisco, and the North Dallas suburbs?
Yes. We take directional boring jobs in Plano, Frisco, McKinney, Allen, Richardson and the rest of North Dallas for utility contractors, developers and telecom companies. Our own crews travel from Yukon, Oklahoma.
Can you perform railroad track crossings in the Dallas area?
Yes, once the crossing is permitted. The railroad sets its own requirements for depth and casing on every crossing, and the permit comes through the utility owner or general contractor. We bore to the railroad’s approved plan, and we pothole existing utilities in the right of way first.
What boring rig sizes do you bring to Dallas projects?
We match the rig to the bore. Our Vermeer D24x40 handles service lines and shorter commercial bores. Our Vermeer D100x140, with 100,000 pounds of pullback, handles long crossings and large pipe up to 48 inches.
Can you work around Dallas’s active traffic and construction environment?
Yes. Boring lets the line go under a busy street without cutting it. When the work is in or next to a traffic lane, you or your general contractor provide the traffic control and the lane closure. We set our pits where the plan allows and keep the crew inside that work zone.
Do you serve Fort Worth and Tarrant County from your Dallas service area?
Yes. The same crews travel from Yukon, Oklahoma for jobs in Dallas County and Tarrant County. See our Fort Worth Texas boring page.
How do I get a quote for boring in Dallas Texas?
Call (405) 409-7423 or contact us at our contact page. Provide the project location, utility type, bore diameter and length, and project schedule. We will respond with a free estimate for your Dallas Texas boring project.
How far can you bore in one shot?
From 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections and a pit between shots. Our longest single shot went under the Arkansas River in Oklahoma. See how far a bore can go and how casing is sized.
How much notice does Texas 811 need before boring in Dallas?
Texas law says the excavator must notify Texas 811 no earlier than 14 days and no later than 48 hours before digging, not counting Saturdays, Sundays and legal holidays. If the start slips past 14 days, the ticket has to be called in again. We call in the ticket on every bore.
Get a Free Quote for Dallas Texas Boring
Serving Dallas and the DFW metroplex with licensed HDD boring services. Commercial, industrial, telecom and residential bores. Call Trinity Boring Solutions.
Trinity Boring Solutions Inc.
9102 Northwest Expy, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Texas Directional Boring Service Areas
- Directional Boring Texas (statewide)
- Directional Boring North Texas and DFW
- Directional Boring Fort Worth TX
- Directional Boring Houston TX
- Directional Boring Austin TX
- Directional Boring San Antonio TX
- Directional Boring El Paso TX
- Directional Boring Arlington TX
- Directional Boring Plano TX
- Directional Boring Lubbock TX
- Directional Boring Amarillo TX
- Directional Boring Wichita Falls TX
- Directional Boring Denton TX
- Directional Boring McKinney TX
- Directional Boring Frisco TX
- Directional Boring Irving TX
- Directional Boring Garland TX
- Directional Boring Waco TX
- Directional Boring Tyler TX
- Directional Boring Sherman TX
- Directional Boring Midland TX
- Directional Boring Odessa TX
- Directional Boring Abilene TX
- Directional Boring Corpus Christi TX
- Directional Boring Killeen TX
- Directional Boring Laredo TX
- Directional Boring Longview TX
- Directional Boring Texarkana TX
- Directional Boring Gainesville TX
- Directional Boring Paris TX
Our Directional Boring Services
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, 3/4 inch service line through 48 inch pipe, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Dallas
Counties: Collin County directional boring · Dallas County directional boring · Denton County directional boring. Same county: Allen · Wylie · Celina · Richardson · Princeton · Prosper · Anna · Melissa · Murphy · Sachse · Fairview · Lucas. All counties: Texas county list. Oklahoma and Texas: directional boring service area.