Boring Cities Served

Trinity Boring Solutions provides horizontal directional drilling, vacuum excavation, and trenching to every major city in Oklahoma. From the OKC metro to the Ozark foothills, we mobilize to your project site with the right rig, the right crew, and 60 years of Oklahoma soil knowledge. Call (405) 409-7423 for a same-day quote.

Why Statewide City Coverage Defines a True Oklahoma Boring Contractor

Utility infrastructure does not follow city limit signs. A gas main running from Edmond to Yukon crosses through Oklahoma City and into Canadian County before it reaches the service area. A fiber optic backbone connecting rural schools may thread through three or four municipalities before the project is complete. A municipal water transmission line that originates in a lake district can pass through unincorporated county land, then into a suburb, then through a city right-of-way, then back out again. A boring contractor that serves only a single city forces project owners and general contractors to piece together multiple subcontractors, each with their own mobilization schedule, insurance requirements, and learning curve on the specific ground conditions.

Trinity Boring Solutions eliminates that problem. Dispatching from our facility at 9102 NW Expressway in Yukon, we maintain statewide coverage across every incorporated city and town in Oklahoma. When a project spans county lines, we follow it. When an emergency utility repair is called at 2:00 AM in a city two hours away, we answer the phone and we send a crew.

Different municipalities carry vastly different permit requirements for boring under their rights-of-way. Oklahoma City has its own engineering review process for major thoroughfare crossings. Yukon works through Canadian County. Edmond maintains separate permit routing for utility crossings under state highways versus city streets. Tulsa’s public works department has a specific encroachment permit workflow that differs from Broken Arrow’s. TBS has navigated these permit environments across Oklahoma for over 60 years. We know which county engineer offices require advance plan submittals, which city inspectors conduct pre-bore walkthroughs, and which municipalities require traffic control plans as part of the permit package.

Local knowledge of utility corridors is equally critical. Where existing gas, electric, water, and telecommunications lines run determines where a new bore can be threaded safely. Our crews have worked alongside Oklahoma’s 811 locate service across thousands of project sites and have built a working knowledge of the typical corridor layouts used by ONG, OGE, PSO, and the various municipal water districts. That knowledge shortens setup time and reduces the risk of hitting existing infrastructure during pilot bore operations.

Directional Boring in the Oklahoma City Metro

The Oklahoma City metropolitan area is one of the fastest-growing regions in the south-central United States. Population growth in suburbs like Edmond, Yukon, Moore, and Mustang has accelerated over the past two decades, driving consistent demand for new utility infrastructure. Natural gas service extensions, fiber to the premise installations, electric transmission upgrades, and municipal water system expansions all require boring contractors capable of working in a mix of urban and suburban environments under active traffic.

The OKC metro presents a specific set of infrastructure challenges that TBS crews navigate daily. NW Expressway is one of the busiest surface streets in the city, a six-lane commercial corridor where utility crossings require precision shot planning and ODOT or city encroachment permits depending on jurisdiction. May Avenue and Meridian Avenue run north-to-south through dense commercial zones where crossing timing often requires night work or weekend mobilization to minimize traffic impact. Interstate 40, I-44, and I-240 are major controlled-access highways where boring depth and casing requirements are dictated by ODOT standards, and where surface restoration must meet highway-grade specifications.

The soil across the OKC metro ranges from the Port Silt Loam that characterizes much of central Oklahoma to Permian red clay in the western suburbs. Red clay is particularly challenging for directional boring because it does not break down easily in the bore fluid and can cause bit plugging or sonde reading interference. Our crews have developed fluid formulas specifically designed for red clay conditions, maintaining bore fluid viscosity that keeps the hole clean and allows accurate steering throughout the pilot bore and reaming cycles.

TBS operates from Yukon, which places us within minutes of the western OKC metro and within 30 to 45 minutes of virtually every municipality in the greater metro area. This proximity means we can mobilize rapidly for emergency repairs, scheduled utility crossings, and phased project work without overnight crew staging costs that drive up budgets for customers located farther from contractor yards.

Directional Boring in the Tulsa Metro

The Tulsa metropolitan area presents a distinct set of utility infrastructure demands shaped by decades of industrial development, river commerce, and one of the densest concentrations of energy sector operations in the region. Broken Arrow has grown into a manufacturing and technology corridor that requires constant utility expansion to support commercial and industrial construction. Owasso and Bixby are experiencing residential growth rates that drive demand for gas, water, and telecommunications boring in subdivision after subdivision.

The Arkansas River crossings in the Tulsa area represent some of the most technically demanding boring work in the state. River crossings require depth calculations that account for scour depth, river bed geology, and regulatory setback requirements. Our crews have performed both minor creek crossings and full Arkansas River crossings, using fluid management systems that protect the watercourse from inadvertent returns during drilling. Industrial utility corridors through Sand Springs, Sapulpa, and the Catoosa port area require large-diameter bores for process piping, steel carrier pipe, and electrical conduit that support refining and chemical processing facilities.

TBS mobilizes to the Tulsa metro from our Yukon base, coordinating with PSO, Rogers County Rural Water, and the City of Tulsa’s utility operations to ensure locate compliance and permit alignment before every bore begins.

Directional Boring Statewide. Beyond the Metro Areas.

The majority of Oklahoma’s land area lies outside the OKC and Tulsa metros, and TBS has always served it. Rural Oklahoma presents entirely different infrastructure challenges than urban utility work. Soil conditions shift dramatically from one region to the next. The Permian red beds of western Oklahoma yield to sandy loam in Garfield County, then to the rocky Cross Timbers geology of Stephens and Garvin counties. Southeast Oklahoma’s Ouachita Mountain terrain introduces shale and slate that require different tooling than the alluvial soils found in the Canadian River basin.

Small cities and rural communities across Oklahoma are currently building out broadband networks under state and federal funding programs. Internet service providers are threading fiber conduit under state highways, county roads, creek crossings, and rail lines from Guymon to McAlester. TBS provides the boring capacity to execute those shots regardless of location. We do not limit our service radius to areas near major interstates. If the project is in Oklahoma, we go.

Long-distance rig mobilization is factored into every rural quote we provide. We plan our mobilization routes, crew schedules, and fluid and tooling logistics before we ever put a rig on a trailer. For multi-day rural projects, we can stage equipment and materials on site to avoid daily round trips. For emergency response in remote areas, we maintain communication with our crews so that a project manager can reach the job site when time is critical. Our equipment includes both small residential-scale rigs suitable for tight easements in small towns and large-diameter machines for pipeline and casing work on rural energy infrastructure.

Why Local Knowledge Matters in Oklahoma Directional Boring

Oklahoma is not a geologically uniform state. The soil and rock conditions encountered on a bore in Enid are fundamentally different from those found in Tahlequah or Lawton. A directional boring contractor that operates statewide must understand these regional differences in order to select the correct tooling, fluid mix, and bore profile for each project. At TBS, our 60 years of Oklahoma boring history means our crew leaders carry that knowledge in their hands.

Central Oklahoma, including the areas around Oklahoma City, Yukon, Moore, and Norman, is dominated by Port Silt Loam and fine sandy loam soils with good boring characteristics in dry conditions. When these soils are saturated they can become soft and require adjusted fluid weights to maintain bore stability. Western Oklahoma introduces Permian red clay, a dense and sticky formation that resists washout and can coat the bore wall with a tight skin that increases pullback resistance for HDPE pipe installation. Our crews adjust reamer selection and pump rates to address red clay conditions before problems develop on the bore string.

Our working relationships with Oklahoma’s major utility providers inform how we approach every project. ONG (Oklahoma Natural Gas) distribution lines follow predictable corridor patterns that our crews recognize across metro and rural service areas. OGE power lines have corridor spacing rules that affect where parallel bores can be placed. PSO in the Tulsa region uses specific installation standards for conduit that TBS crews follow without the learning curve that a first-time contractor on a PSO project would experience. Municipal water districts across Oklahoma each have their own pipe material preferences and inspection protocols that TBS has encountered many times over.

Okie811 locate coordination is mandatory on every project and TBS processes all locate requests before mobilization. We work with the local utility companies to resolve conflicts between marked lines and planned bore paths before breaking ground. When locate marks suggest an existing line is directly in the path of a planned bore, we adjust the shot design rather than proceed and hope for the best. This approach has been central to our safety record across 60 years of Oklahoma underground work.

ODOT permit familiarity by county is a direct operational advantage. Each ODOT district has slightly different permit processing timelines and documentation requirements. Our office staff knows which districts process permits in 48 hours and which require two-week advance submittals, and we plan mobilization schedules accordingly. For highway crossings in rural areas where only one ODOT engineer covers the region, knowing the right contact shortens the permit approval timeline significantly.

Our Yukon base positions us for rapid response anywhere in the metro corridor and reasonable mobilization times to every part of the state. From Yukon, our crews reach Edmond and Guthrie in under 30 minutes, Lawton in under 90 minutes, and Tulsa in under two hours. For the remotest parts of the state, we plan multi-day mobilizations that cost-effectively stage crews on site for the duration of the project.

Our Equipment Covers Oklahoma. Every Job Size.

Trinity Boring Solutions operates a fleet of more than 10 horizontal directional drilling rigs spanning a full range of bore diameters and thrust capacities. Our smallest rigs are well suited to residential service laterals, narrow easements in established neighborhoods, and light commercial conduit bores where confined working space limits what can be brought to the job site. Our largest machines are capable of the thrust loads and pump volumes required for large-diameter pipeline installation, river crossings, and cased highway bores under ODOT-standard casing requirements.

We do not turn away small jobs because we are too busy running large ones, and we do not struggle with large jobs because we lack the capacity. That range of equipment, staffed by trained crews, is why general contractors and utility owners return to TBS project after project. A fiber optic provider installing conduit in a rural school district can book TBS knowing the same company that handled a 36-inch casing bore on a natural gas pipeline can handle a 2-inch HDPE bore for a single service lateral. The equipment matches the job, not the other way around.

Our equipment portfolio includes Ditch Witch and Vermeer horizontal directional drilling machines, vacuum excavation units for safe potholing around existing utilities, and support equipment including mud mixing systems, spoil trailers, and support vehicles. Vacuum excavation is used on every TBS project where marked utilities are within the bore zone, giving us visual confirmation of line depths before the bit gets close. The Arkansas River crossings our crews have completed required the full capacity of our largest rigs, with extended bore runs, multiple reaming passes, and specialized fluid management to complete the crossing within regulatory requirements.

Certified and Affiliated

Frequently Asked Questions. Statewide Directional Boring Service.

Answers to the most common questions about Trinity Boring Solutions statewide city service.

Ready to Start Your Oklahoma Boring Project?

TBS serves every Oklahoma city. Call for a free quote on directional boring, HDD, trenching, or vacuum excavation anywhere in the state. We answer 24/7.

Trinity Boring Solutions

9102 NW Expressway, Yukon, OK 73099

(405) 409-7423

[email protected]

NAICS 238910 | NAICS 237990 | CSI 33 05 23 | CSI 33 05 23.13

All Oklahoma CountiesOklahoma Locations Hub