Directional Boring Contractors in King County, TX

Trinity Boring Solutions is a directional boring contractor serving King County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Guthrie. Guthrie, the county seat, is about 260 road miles southwest of the Trinity main office in Yukon, Oklahoma. Most King County bores go under US 82 and US 83 and the South Wichita River. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in King County, Texas

Type the address of your job in King County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in King County?

King County covers 911 square miles, has about 215 residents and sits in the TxDOT Childress District.

County seatGuthrie
Population215 (2024 Census estimate), down 18.3% since 2020
Land area911 square miles
Largest cities and townsNo incorporated cities
TxDOT districtTxDOT Childress District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesAEP Texas North, South Plains Electric Cooperative and Tri-County Electric Cooperative
Interstate and US highwaysUS 82 and US 83
State Highways114 and 222
RiversSouth Wichita River, Middle Fork Wichita River and North Wichita River
Creeks and other streamsNorth Croton Creek, Willow Creek, Farrer Creek, Pen Branch, Little Croton Creek, Buford Branch, Brushy Creek and Bird Creek
RailroadsNo main line track
Average precipitation23.5 inches a year (1991 to 2020)
Road distance from Trinity main officeAbout 260 miles from Yukon, Oklahoma to Guthrie
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in King County?

A bore in King County most often has to cross a highway such as US 82, US 83 or State Highway 114 and a stream such as the South Wichita River, the Middle Fork Wichita River or North Croton Creek. State Highways 114 and 222 also run through the county. The Census map names 25 larger streams in King County, led by the South Wichita River, North Croton Creek, the Middle Fork Wichita River, Willow Creek, Farrer Creek and Pen Branch. The rest are North Wichita River, Little Croton Creek, Buford Branch, Brushy Creek, Bird Creek, Newman Creek, Long Canyon Creek, Bitter Creek, Ox Yoke Creek, Love Creek, Haystack Creek, Gyp Creek, Dikes Creek, Salt Creek, Spring Creek, Cottonwood Creek, East Fork Dove Creek, Dry Creek and Ash Creek. There is no main line railroad in King County.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in King County?

Rock is the main thing to plan for in King County: the federal soil survey records bedrock within five feet of the surface on about 63 percent of the county, a mix of hard and soft, weathered rock. In King County the bore path is set around rock where that is possible, and rock tooling goes on the truck where it is not. June is the wettest month in King County at 3.3 inches on average and January the driest at 0.9. King County averages 23.5 inches of precipitation a year, so the ground is usually dry at bore depth.

  • Most common soils: Talpa (12%), Cottonwood (9%) and Knoco (9%).
  • Surface texture: most often loam (34%) or clay loam (12%).
  • Bedrock within 5 feet: about 63% of the county. It is a mix of hard rock and softer weathered rock. Rock outcrop is mapped on about 3%.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 39% of the county.
  • Gravelly, cobbly or stony surface soil: about 15% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, King County, Texas (survey area TX269, version 24, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in King County?

The TxDOT Childress District permits bores under state highways in King County, the King County Commissioners Court handles county roads.

  • State highways. US 82, US 83, the other numbered state routes and the farm to market roads in King County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Water crossings. A bore under the South Wichita River, the Middle Fork Wichita River or North Croton Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve King County?

AEP Texas North, South Plains Electric Cooperative and Tri-County Electric Cooperative serve King County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas North is an investor owned utility; South Plains Electric Cooperative and Tri-County Electric Cooperative are member owned cooperatives. Conduit bored in King County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.

Is King County Growing?

The population of King County went from 263 in 2020 to 215 in 2024, a loss of 18.3 percent. In King County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.

Which Cities and Towns in King County Does Trinity Serve?

King County has no incorporated cities, so Trinity takes directional boring work in Guthrie and at rural sites, ranches and lease roads across the county.

King County borders Cottle County, Dickens County, Foard County, Haskell County, Kent County, Knox County, Motley County and Stonewall County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Paducah (Cottle), Dickens (Dickens), Crowell (Foard), Haskell (Haskell), Jayton (Kent), Benjamin (Knox), Matador (Motley) and Aspermont (Stonewall).

Which Directional Boring Services Are Available in King County?

Every Trinity service is available in King County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a King County job before you call.

King County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Guthrie, Texas?

Yes. Trinity Boring Solutions takes work in Guthrie and the rural parts of King County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 82 in King County?

The TxDOT Childress District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the King County Commissioners Court and city streets through the city.

Is there rock in King County?

Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 63 percent of King County, a mix of hard and soft, weathered rock. Potholing confirms it on the actual bore path.

Can a line be bored under the South Wichita River in King County?

Yes. A drill is steered below the bed of the South Wichita River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Is Trinity insured for work in King County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in King County?

We start from a general range based on length and pipe size. Depth, the crossings and the ground set the number, and rock is a factor on many King County jobs.

How Do You Get a Bore Quote in King County?

Call (405) 409-7423 any time or send the address in King County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.