Directional Boring Contractors in Runnels County, TX

Trinity Boring Solutions is a directional boring contractor serving Runnels County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Ballinger, Winters and Miles. From the Trinity main office in Yukon, Oklahoma it is about 351 road miles southwest to Ballinger, the county seat. Most Runnels County bores go under US 67 and US 83 and the Colorado River. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Runnels County, Texas

Type the address of your job in Runnels County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Runnels County?

Runnels County covers 1,051 square miles, has about 9,751 residents and sits in the TxDOT San Angelo District.

County seatBallinger
Population9,751 (2024 Census estimate), down 1.5% since 2020
Land area1,051 square miles
Largest cities and townsBallinger (3,530), Winters (2,281) and Miles (934)
TxDOT districtTxDOT San Angelo District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesAEP Texas North, Concho Valley Electric Cooperative and Taylor Electric Cooperative
Interstate and US highwaysUS 67 and US 83
State Highways153 and 158
State loops and spursLoop 438
RiversColorado River
Creeks and other streamsValley Creek, Elm Creek, Antelope Creek, Bluff Creek, Big Coyote Creek, Mud Creek, Hog Creek and Long Branch
LakesLake Ivie, Lake Winters and Lake Ballinger
Railroadsshort line railroads, about 35 main line miles
Average precipitation24.6 inches a year (1991 to 2020)
New housing units permitted4 in 2025
Road distance from Trinity main officeAbout 351 miles from Yukon, Oklahoma to Ballinger
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Runnels County?

A bore in Runnels County most often has to cross a highway such as US 67, US 83 or State Highway 153, a stream such as the Colorado River, Valley Creek or Elm Creek and short line track. State Highways 153 and 158 also run through the county, along with Loop 438. The Census map names 25 larger streams in Runnels County, led by the Colorado River, Valley Creek, Elm Creek, Antelope Creek, Bluff Creek and Big Coyote Creek. The rest are Mud Creek, Hog Creek, Long Branch, Little Concho Creek, Red Bank Creek, Mustang Creek, Little Coyote Creek, South Fork, Quarry Creek, Middle Mustang Creek, Coyote Creek, Pony Creek, Mesquite Creek, Indian Creek, Wagon Tire Creek, Mustang Branch, Rocky Creek, Butternut Creek and Fish Creek. Lake Ivie, Lake Winters and Lake Ballinger are the main mapped lakes. The federal rail map shows about 35 miles of main line track in Runnels County, owned by short line operators.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Runnels County?

Caliche is the main thing to plan for in Runnels County: the federal soil survey maps a cemented caliche layer within five feet of the surface on about 19 percent of the county, under a surface that is most often clay loam. Because caliche wears tooling fast, the bit and reamer for a bore in Runnels County are picked before the rig leaves the yard. May is the wettest month in Runnels County at 3.3 inches on average and January the driest at 1.1. Runnels County averages 24.6 inches of precipitation a year, so the ground is usually dry at bore depth.

  • Most common soils: Rowena (17%), Potter (9%) and Mereta (9%).
  • Surface texture: most often clay loam (56%) or clay (8%).
  • Bedrock within 5 feet: about 20% of the county. Most of it is hard rock.
  • Caliche within 5 feet: about 19% of the county.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 58% of the county.
  • Gravelly, cobbly or stony surface soil: about 11% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Runnels County, Texas (survey area TX399, version 23, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Runnels County?

The TxDOT San Angelo District permits bores under state highways in Runnels County, the Runnels County Commissioners Court handles county roads, and Ballinger, Winters and Miles each handle their own streets.

  • State highways. US 67, US 83, the other numbered state routes and the farm to market roads in Runnels County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Railroads. A bore under short line track in Runnels County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
  • Water crossings. A bore under the Colorado River, Valley Creek or Lake Ivie is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Runnels County?

AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric Cooperative serve Runnels County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas North is an investor owned utility; Concho Valley Electric Cooperative and Taylor Electric Cooperative are member owned cooperatives. Conduit bored in Runnels County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.

How Much New Construction Is There in Runnels County?

Runnels County permitted 4 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Runnels County went from 9,900 in 2020 to 9,751 in 2024, a loss of 1.5 percent. Most bore work in Runnels County is replacement and upgrade of lines already in the ground.

Which Cities and Towns in Runnels County Does Trinity Serve?

Trinity takes directional boring work in all 3 incorporated places in Runnels County and at sites outside city limits, and Ballinger is the largest with about 3,530 residents.

City or town2024 population
Ballinger3,530
Winters2,281
Miles934

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Runnels County.

Runnels County borders Coke County, Coleman County, Concho County, Nolan County, Taylor County and Tom Green County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Robert Lee (Coke), Coleman (Coleman), Paint Rock (Concho), Sweetwater (Nolan), Abilene (Taylor) and San Angelo (Tom Green).

Which Directional Boring Services Are Available in Runnels County?

Every Trinity service is available in Runnels County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Runnels County job before you call.

Runnels County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Ballinger, Texas?

Yes. Trinity Boring Solutions takes work in Ballinger, Winters and Miles and the rural parts of Runnels County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 67 in Runnels County?

The TxDOT San Angelo District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Runnels County Commissioners Court and city streets through the city.

Is there rock in Runnels County?

Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 20 percent of Runnels County, most of it hard rock. Caliche shows up within five feet on about 19 percent. Potholing confirms it on the actual bore path.

Can a line be bored under the Colorado River in Runnels County?

Yes. A drill is steered below the bed of the Colorado River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Which railroads have track in Runnels County?

Short line operators, with about 35 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.

Is Trinity insured for work in Runnels County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Runnels County?

The footage and the pipe size give a general range to start from. Depth, the crossings and the ground set the number, and caliche is a factor on many Runnels County jobs.

How Do You Get a Bore Quote in Runnels County?

Call (405) 409-7423 any time or send the address in Runnels County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.