trinityboringsolutions.com

Mount Pleasant Texas Directional Boring: Woodtell Soil, Interstate 30 and Hayes Creek

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Mount Pleasant, Texas, including routes beneath Interstate 30 where pavement needs to stay intact. The Yukon main office is 286 road miles away, and our crews and vetted drilling partners can work along Ferguson Road. Woodtell soil is the leading mapped series at 31 percent, while clay loam at about 40 inches can grip a reamer. A Hayes Creek crossing calls for a route planned below the channel.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Mount Pleasant bores at a glance

  • County seat of Titus County, Texas. Population 16,238 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 286 miles, about 5.6 hours of driving.
  • Ground: Woodtell soil is mapped on 31 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 9 percent of the area.
  • Highways inside the boundary: Interstate 30, US 271, US 271 Business, US 67 and Texas State Highway 49. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: Union Pacific and Blacklands Railroad, with 24 mapped street and rail crossings.
  • Named streams inside the boundary: Hayes Creek, Tankersley Creek, Big Cypress Creek and Hart Creek.
  • Public water: City of Mount Pleasant, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring near Interstate 30 in Mount Pleasant?

Trinity Boring Solutions takes directional boring jobs in Mount Pleasant, Titus County, including routes under Interstate 30 and service runs along Jefferson Avenue. The Census Bureau Vintage 2024 estimate puts the city population at 16,238. We install water, sewer, gas, electric conduit and fiber for routes that connect properties along Ferguson Road or cross local streets without opening the pavement.

Our main office is in Yukon, Oklahoma, and Mount Pleasant work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Mount Pleasant, our range runs from 3/4 inch service lines, such as a short connection off US 271 Business, to 48 inch casing for a long crossing. We are a family business that started in 1965 and has done directional boring since 1982, including Texas work.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does Woodtell soil mean for a bore in Mount Pleasant?

Mount Pleasant’s mapped ground is led by Woodtell soil, which covers 31 percent of the city. The USDA soil survey maps fine sandy loam at the surface across 56 percent of the area, but clay loam makes up 35 percent of the mapped soil at about 40 inches below ground. Clay and sandy clay loam textures can make a reamer sticky and let clay grip the pipe. Those survey patterns guide planning, but they are not test borings; the ground at a Hayes Creek crossing can differ from a route along Jefferson Avenue.

USDA soil survey, inside the Mount Pleasant city limitsWhat is mapped
Soil series mappedWoodtell 31 percent, Freestone 23 percent, Wolfpen 19 percent, Pickton 7 percent and Nahatche 7 percent
Texture at the surfacefine sandy loam 56 percent, loamy fine sand 19 percent and loam 8 percent
Texture about 40 inches downclay loam 35 percent, clay 29 percent and sandy clay loam 23 percent
Engineering class about 40 inches downfat clay (CH) 57 percent, clayey sand (SC) 21 percent and lean clay (CL) 10 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches9 percent of the area (0 percent hard rock, 9 percent weathered rock)
Seasonal water table within 60 inches45 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel65 percent of the area

Weathered bedrock is mapped within 60 inches across 9 percent of Mount Pleasant, with typical bedrock depth listed as 46 inches, so a route may meet harder material. The seasonal water table is within 60 inches across 45 percent, and flood prone soils cover 10 percent, which matters for pits near Hayes Creek. High steel corrosion risk is mapped across 65 percent, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that soil corrosion concern. The map includes Cenozoic clayey, fine to medium sand and fine sandy clay decomposition residuum, plus the Paleogene Wilcox Group, undivided.

How do we drill Mount Pleasant ground with clay loam below?

For a Mount Pleasant bore, we plan for the clay loam mapped below the surface and adjust the drilling fluid and reaming sequence to suit the route. Hayes Creek and local pavement affect the entry, exit and pressure plan.

  1. Along a Woodtell soil route, we use a fluid mix suited to clay and ream in stages so sticky material does not load the reamer.
  2. Where Mount Pleasant’s heavy clay is mapped, we watch the fluid returns and keep pressure controlled to avoid lifting pavement on streets such as Ferguson Road.
  3. For a Hayes Creek crossing, we plan the bore below the channel and check the route for Corps jurisdiction before setting the pits.
  4. Near the seasonal water table mapped in Mount Pleasant, we keep pits compact and pump water as needed; we also pothole marked lines before drilling near them.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a Mount Pleasant bore pass Union Pacific tracks?

Mount Pleasant bores may cross Interstate 30, US 271, US 271 Business, US 67 or one of the state and farm to market highways inside the city. Ferguson Road runs 3.58 miles within the limits, while 16th Street runs 3.4 miles and 1st Street runs 3.17 miles. A route beneath existing highway pavement is bored or tunneled rather than open cut. For a rural highway crossing, the bore extends beneath all travel lanes, keeping the paved surface intact.

CrossingTypeMapped extentWho has a say
Interstate 30Interstate11.3 roadway miles insideState highway office
US 271US highway16.4 roadway miles insideState highway office
US 271 BusinessUS highway9.6 roadway miles insideState highway office
US 67US highway3.8 roadway miles insideState highway office
Texas State Highway 49State highway2.2 roadway miles insideState highway office
FM 1734State highway2.1 roadway miles insideState highway office
FM 1402State highway2 roadway miles insideState highway office
FM 899State highway1.9 roadway miles insideState highway office
FM 1000State highway1.9 roadway miles insideState highway office
FM 127State highway1.9 roadway miles insideState highway office
FM 2152State highway1.6 roadway miles insideState highway office
FM 3417State highway0.6 roadway miles insideState highway office
FM 1001State highway0.5 roadway miles insideState highway office
Spur 134State highway0.2 roadway miles insideState highway office
Swipe the table sideways to see every column.

Union Pacific has 10.04 track miles in Mount Pleasant, and Blacklands Railroad has 1.81; the mapped inventory includes 24 street and rail crossings. A route crossing either railroad needs an agreement from that track owner, which sets the crossing conditions. Hayes Creek has 5.24 channel miles in the city, and 17 street crossings of named streams are mapped. Tankersley Lake and New City Lake are also inside the limits, so a planned water crossing is checked for Corps jurisdiction.

Who signs off on a Mount Pleasant bore in Titus County?

Mount Pleasant city streets are managed by the city, while Interstate 30, US 271, US 67 and FM right of way need a TxDOT utility permit reviewed by the TxDOT Atlanta District. The line owner files in RULIS, using our bore plan and profile. TxDOT cover rules call for 60 inches for electric, communications and water at crossings, 48 inches for electric and communications along right of way, and 36 inches for water along it; pressurized sewer crossings need 60 inches. A Union Pacific or Blacklands track crossing needs its owner’s agreement, and Hayes Creek or lake crossings are checked for Corps jurisdiction in planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Mount Pleasant system?

The City of Mount Pleasant public water system uses surface water and reports 7,080 service connections serving 16,238 people. Southwestern Electric Power, Texas New Mexico Power, Bowie Cass Electric Cooperative and Wood County Electric Cooperative report electric service in Titus County, but the line owner must be confirmed for the address before a conduit bore. Near the city water system, we hydrovac marked lines before drilling close to them so their depth is known, not just their painted position.

Line ownerWhat it isSourceSize
City of Mount PleasantPublic water systemSurface water7,080 connections, 16,238 people served
Southwestern Electric Power, Texas-New Mexico Power, Bowie-Cass Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Titus CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Mount Pleasant’s median housing year at 1978; 15 percent of homes were built before 1960, 68 percent from 1960 to 1999 and 17 percent in 2000 or later. An older service along 1st Street may call for a replacement bore, while newer construction may need a new connection. We expose marked utilities before the drill approaches, especially where a route crosses existing water or electric lines.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far do we travel to Mount Pleasant near Winfield?

Mount Pleasant is the Titus County seat, at elevation 389 feet, and covers 20.33 square miles. ZIP code 75455 serves the city. Winfield is 7.9 miles west, Miller’s Cove is 8.1 miles west, Rocky Mound is 9.8 miles south, Pittsburg is 11.0 miles south and Omaha is 13.8 miles east. The Yukon yard is 286 road miles away, a 5.6 hour drive, so mobilization is part of planning a bore near Interstate 30 or a rural property outside the city limits.

Places near Mount Pleasant

Which Mount Pleasant jobs call for a bore near Ferguson Road?

  • Highway crossing: A bore beneath Interstate 30 or US 271 keeps existing pavement uncut and follows TxDOT permit conditions.
  • Water service: A new connection near the City of Mount Pleasant system starts with the line owner and marked utilities confirmed.
  • Fiber drop: A conduit route along 16th Street can pass beneath sidewalks and driveways without opening those surfaces.
  • Creek crossing: A Hayes Creek bore is planned beneath the channel, with water jurisdiction checked during route planning.
  • Rail crossing: A route under Union Pacific or Blacklands Railroad track needs the agreement of the railroad that owns it.
  • Farm and acreage service: A longer route toward Winfield can need extra planning for access, line crossings and mobilization from Yukon.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Mount Pleasant bore near 1st Street?

For a Mount Pleasant quote, start with the address or map pin, such as a property on 1st Street or a route near Interstate 30. Tell us what goes underground, then the pipe or conduit size and the footage. A sketch or plans help show where the bore starts, ends and crosses utilities near the City of Mount Pleasant water system.

The price reflects the full Mount Pleasant route, not one detail alone. Woodtell soil and clay loam can affect drilling time, while an Interstate 30 crossing or Union Pacific track adds crossing requirements. We also account for pipe size and length, utilities to expose, pavement or concrete, creek drainage, pits, excavator time and sand backfill. The 286 road miles from Yukon can affect mobilization, as can high profile or emergency work.

Questions people ask about boring in Mount Pleasant

Does Trinity Boring Solutions take jobs in Mount Pleasant and Titus County, and who does the work?

Yes, we take directional boring work in Mount Pleasant and across Texas. The job is handled by our own crews or by satellite yards run by drilling partners we have vetted. You work with Trinity through the bore log, whether the route is near Interstate 30 or out in Titus County.

Who supplies electricity in Mount Pleasant and Titus County, and who confirms conduit specs?

Electric service reporting in Titus County includes Southwestern Electric Power, Texas New Mexico Power, Bowie Cass Electric Cooperative and Wood County Electric Cooperative. Those records do not identify the provider at every address. We confirm the line owner and conduit requirements for the specific route before planning a bore near Jefferson Avenue.

Can a Mount Pleasant bore cross 16th Street without cutting it, and who controls the street?

The city controls its streets, including 16th Street, and a directional bore can pass beneath pavement without an open cut. We plan the entry and exit pits outside the street surface and check marked utilities along the route before drilling.

Could older buried lines near Ferguson Road affect a Mount Pleasant replacement bore?

They could. The American Community Survey 2019 to 2023 estimates give Mount Pleasant a median housing year of 1978, and 15 percent of homes were built before 1960. Older service lines near Ferguson Road may need replacement, so we locate and expose marked utilities before drilling near them.

Can groundwater or flooding affect bore pits near Hayes Creek in Mount Pleasant?

Yes, it can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches across 45 percent of Mount Pleasant and flood prone soils across 10 percent. Near Hayes Creek, we plan the route below the channel and prepare to manage water in the pits.

Does Woodtell soil in Mount Pleasant corrode steel, and what pipe can we use?

The mapped soil information shows high steel corrosion risk across 65 percent of Mount Pleasant, though conditions vary by route. The line owner selects materials and any coating for steel casing or tracer wire. HDPE is not subject to that soil corrosion concern, and Woodtell soil mapping is not a site specific test.

Will Trinity take work near Winfield and rural sites outside Mount Pleasant?

Yes, we take work across Texas, including routes near Winfield and rural properties beyond Mount Pleasant city limits. Winfield is 7.9 miles west of the city, and a longer trip from Yukon can affect mobilization planning. The route and access determine the equipment and crew plan.

How much notice does Texas811 need for a Mount Pleasant bore along Jefferson Avenue?

The excavator or utility arranging the work requests a Texas811 locate for the bore path along Jefferson Avenue at least 48 hours before digging, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a Mount Pleasant directional bore near Interstate 30?

The route sets the scope. Near Interstate 30, pavement and highway crossing conditions matter; Woodtell soil and deeper clay can affect drilling time. Pipe size, bore length, utility exposures, creek drainage, pit and excavator needs, emergency timing and the 286 road miles from Yukon can also affect the price.

Where the Mount Pleasant facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Mount Pleasant

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Mount Pleasant, Texas

Type the address of your job in Mount Pleasant. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Mount Pleasant

Same county: Talco. All counties: Texas county list.