trinityboringsolutions.com

Spring Gardens Texas Directional Boring: Victoria Clay, Beaumont Formation, Delta Silt And Clay

Quick Answer: Spring Gardens soil maps show Victoria clay through the top five feet, with Beaumont Formation clay and silt mapped beneath it. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes beneath Reyna Street and other local pavement. Spring Gardens is 596 road miles from our Yukon, Oklahoma main office, so mobilization is part of planning near Robstown. Heavy clay can cling to the reamer, so we stage the reaming and manage fluid returns.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Spring Gardens bores at a glance

  • Unincorporated community in Nueces County, Texas. Population 497 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 596 miles, about 11.7 hours of driving.
  • Ground: Victoria soil is mapped on 98 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • No state or US highway is mapped inside the boundary or within a mile and a half of it.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring along Reyna Street in Spring Gardens?

Trinity Boring Solutions takes directional boring work in Spring Gardens, Nueces County, where the Census Bureau counted 497 residents in the 2020 Census. The top five feet of mapped ground is mostly Victoria clay, with clay and silt formations shown below. Water, sewer, gas, electric conduit and fiber lines can run beneath Reyna Street or other local roads, where boring avoids cutting the pavement.

Our main office is in Yukon, Oklahoma, and Spring Gardens work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; Spring Gardens is in Nueces County. For a Trejo Street route, our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Victoria soil mean for a bore in Spring Gardens?

The USDA soil survey maps Victoria soil across 98 percent of Spring Gardens, and Victoria clay 0 to 1 percent slopes across 97 percent. Clay is the mapped surface texture across 99 percent of the community. At about 40 inches below the surface, clay is mapped across 99 percent and the soil is classified CH across 100 percent. Average clay content at that depth is 60 percent. We treat Victoria soil series maps as mapped patterns, not test borings, and verify actual conditions before planning a Spring Gardens bore. For a bore, sticky clay can gather on the reamer and grip pipe, so we plan staged reaming and control the drilling fluid.

USDA soil survey, inside the Spring Gardens mapped community boundaryWhat is mapped
Soil series mappedVictoria 98 percent
Texture at the surfaceclay 99 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down60 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel98 percent of the area

Bedrock is not mapped in the top five feet of Spring Gardens, which does not rule out rock deeper down. The USDA soil survey maps no seasonal water table within 60 inches and no flood prone soils. It maps high steel corrosion risk across 98 percent, so the line owner should consider casing and tracer wire materials; HDPE does not share that concern. The geology map identifies Beaumont Formation, areas predominantly clay, of Pleistocene age, and Delta silt and clay of Late Pleistocene age. Clay and silt can keep a hole open, but heavy clay calls for careful fluid returns.

How do crews handle clay in Spring Gardens?

Spring Gardens clay calls for measured fluid use and a steady reaming plan. Victoria soil is mapped as heavy clay, so we watch returns and keep pressure controlled near Reyna Street pavement.

  1. Victoria soil is mapped as heavy clay, so we use fluid suited to sticky ground and keep an eye on returns that could lift pavement.
  2. With clay mapped at about 40 inches across Spring Gardens, we ream in stages and pull the pipe the same day the final hole is opened.
  3. Before a bore approaches a marked line near Trejo Street, we expose that utility with hydrovac potholing because surface paint does not show its depth.
  4. On a Reyna Street bore, a walkover locator tracks the drill head from the surface while we record its depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What does a bore have to cross on Reyna Street in Spring Gardens?

Spring Gardens has no highway mapped inside the community boundary or within 1.5 miles outside it, so a route on Reyna Street is more likely to involve local pavement than a mapped highway crossing. The longest named local streets are Reyna Street at 0.49 miles, Longoria Street at 0.45 miles, and Trejo Street at 0.44 miles. Herrera Street, Reyes Street and Ramirez Street each measure 0.44 miles. A bore can pass beneath these streets without opening a trench through the road surface.

The mapped community has no railroad inside it or within one mile outside it, so no local rail crossing is shown for a route near Reyna Street. No streams are mapped inside or within one mile of Spring Gardens, and no lakes or ponds are mapped within one mile. The public road map records no street and rail crossings and no street crossings of named streams inside the boundary. If a planned route changes to include a water crossing, its possible Corps jurisdiction is checked during planning.

Who has to sign off on a bore in Nueces County near Spring Gardens?

Spring Gardens is an unincorporated census designated place, so it has no city government; authority for local streets and permits rests with the county or state, depending on the route. No highway is mapped inside the community or within 1.5 miles outside it. If a route reaches a state highway right of way, the utility owner files through TxDOT’s RULIS system and the TxDOT Corpus Christi District reviews it. We prepare the bore plan and profile for that owner’s application and work under its permit. No railroad or stream crossing is mapped near the community.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Nueces County near Spring Gardens?

The water provider for a specific Spring Gardens address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not identify a provider for this address by matching it to the community. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Nueces County, but we confirm the line owner for the specific address before planning a conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric CooperativeElectric utilities reporting service in Nueces CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Spring Gardens’ median housing year at 2001; 53 percent of homes were built in 2000 or later and 47 percent from 1960 to 1999. That mix can mean either a replacement route or a new service along Longoria Street. Before the drill approaches a marked line, we expose it with hydrovac potholing; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Spring Gardens from Robstown and our Yukon yard?

Spring Gardens is a 1.0 square mile community in Nueces County, at an elevation of 73 feet, and ZIP code 78380 covers the area. Tierra Verde is 1.5 miles east, La Paloma-Lost Creek is 2.9 miles south, Banquete is 4.3 miles northwest, and North San Pedro is 4.6 miles northeast. Robstown, the nearest larger city, is 5.0 miles northeast; Corpus Christi, the county seat, is 34.8 miles east. The Yukon yard is 596 road miles away, a 11.7 hour drive, which affects mobilization for work near Reyna Street.

Places near Spring Gardens

Which jobs call for a bore near Trejo Street in Spring Gardens?

  • Water service: A service route beneath Reyna Street can connect a property after the provider for that specific address is confirmed.
  • Sewer line: A replacement beneath Longoria Street can avoid opening a trench along the road surface.
  • Fiber conduit: A route beneath Trejo Street can carry conduit while keeping the street surface intact.
  • Electric conduit: Before planning a crossing near Herrera Street, we confirm which utility owns the line at that address.
  • Large casing: The mapped Victoria clay along Reyes Street can be considered when sizing a casing bore and planning staged reaming.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Spring Gardens quote near Herrera Street?

For a Herrera Street quote, start with the address or map pin, then tell us what goes underground. Add the pipe or conduit size and the footage, such as a short service connection or a longer route beneath a local road. A sketch or plans help us see the bore path and nearby crossings before we scope the work.

Price follows the route and job details. Victoria clay can affect drilling fluid and reaming; crossings and exposed utilities along Reyna Street affect the work plan; and pavement, pits, backfill, excavator time or drainage crossings can add steps. Mobilization reflects the 596 road miles from Yukon to Spring Gardens, which we account for when scheduling a project. Pipe size, bore length and whether the work is high profile or an emergency matter too.

Questions people ask about boring in Spring Gardens

Does Trinity Boring Solutions take Spring Gardens jobs in Nueces County, and who staffs them?

Yes, we take directional boring work in Spring Gardens, Nueces County. Our own crews and crews from satellite yards operated by partner drilling contractors we have vetted can handle the work. You deal with Trinity from the first call through the bore log, including for a route along Reyna Street.

Who is responsible for Trejo Street in Spring Gardens, and does a bore require cutting it?

Spring Gardens has no city government, so local street authority rests with the county rather than a city. A directional bore beneath Trejo Street can leave the pavement uncut, with entry and exit pits placed in the dirt on either side of the route.

What do Spring Gardens housing ages along Longoria Street suggest about replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year in Spring Gardens at 2001, with 47 percent of homes built from 1960 to 1999. That age range may bring replacement work as well as new services near Longoria Street. Near Reyna Street, we expose marked utilities before drilling close to them.

Can Victoria soil in Spring Gardens corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 98 percent of Spring Gardens, including areas mapped as Victoria soil. The line owner should consider the materials for steel casing and tracer wire. HDPE does not share the mapped soil corrosion concern; the owner selects materials for the line.

What ground will a bore pass through in Spring Gardens Victoria soil?

The USDA soil survey maps Victoria clay across 97 percent of Spring Gardens. At about 40 inches below the surface, clay is mapped across 99 percent and the soil classification is CH across 100 percent. Sticky clay can load a reamer, so staged reaming and controlled fluid use matter.

Could a Spring Gardens bore encounter the clay surface soil listed for this area?

We know bedrock is not mapped in the top five feet of Spring Gardens in Nueces County, but deeper rock remains possible. The geologic map shows Beaumont Formation clay and silt and Late Pleistocene Delta silt and clay. A project near Reyna Street still needs a route planned for the ground encountered.

What bore sizes and lengths can Trinity handle for a Spring Gardens job near Herrera Street?

For a route near Herrera Street, our equipment range covers 3/4 inch service lines through 48 inch casing and bore lengths from 10 feet to 5,000 feet. The right setup depends on what the line carries, its size and footage, and the mapped Victoria clay along the route.

How early should I call Texas811 for a Spring Gardens bore near Reyna Street, and what if marks move?

For a bore near Reyna Street, the locate request must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. When coordinating with TxDOT Corpus Christi District, we make a new request if the start slips more than 14 days past the original notice. On Longoria Street, we refresh worn or moved marks through Texas811 before we continue drilling.

What affects the cost of directional boring in Spring Gardens near Reyna Street?

The job scope determines the price for a Reyna Street bore. Factors include footage, pipe or conduit size, Victoria clay, utilities to expose, pavement, pits, backfill and excavator time. Drainage crossings, high profile or emergency work, and mobilization from Yukon also affect planning and price.

Where the Spring Gardens facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Spring Gardens

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Spring Gardens, Texas

Type the address of your job in Spring Gardens. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Spring Gardens

Same county: Corpus Christi · Port Aransas · Bishop · Agua Dulce · Driscoll · Rancho Banquete · Tierra Grande · Sandy Hollow-Escondidas · Petronila. All counties: Texas county list.