trinityboringsolutions.com

Christoval Texas Directional Boring: Tarrant Soil, US 277, South Concho River

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Christoval, Texas, including routes beneath US 277 and Main Street. The jobsite is 400 road miles from our Yukon yard, and Playland Park Road is one local route to assess. Tarrant soil is often cobbly clay, while bedrock is mapped close to the surface, so drilling may move from sticky ground into hard rock. The South Concho River and its canal also call for attention to the route and crossing conditions.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Christoval bores at a glance

  • Unincorporated community in Tom Green County, Texas. Population 482 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 400 miles, about 8 hours of driving.
  • Ground: Tarrant soil is mapped on 83 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 83 percent of the area.
  • Highways inside the boundary: US 277 and RM 2084. State permit office: TxDOT San Angelo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: South Concho Irregation Canal and South Concho River.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Christoval near the South Concho Irregation Canal?

Trinity Boring Solutions takes directional boring work in Christoval, Tom Green County, where the water provider must be confirmed by address and county electric reports identify possible line owners before a conduit bore near US 277. The Census Bureau’s 2020 Census count is 482 people. We install water, sewer, gas, electric conduit and fiber routes beneath streets such as Main Street, after confirming the existing lines and their owners.

Our main office is in Yukon, Oklahoma, and Christoval work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. The South Concho River and canal run through the mapped community, so protecting existing utility routes matters. Our family business began in 1965 and has drilled directionally since 1982, with no utility strike in over 25 years.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Tarrant soil affect drilling in Christoval?

The USDA soil survey maps Tarrant soil across 83% of Christoval, with cobbly clay as the surface texture across the same share. At about 40 inches below the surface, bedrock is mapped across 83% of the area and silty clay loam across 15%. Heavy clay is mapped at that depth across 17% of the community. Across Christoval, mapped Tarrant, Angelo, and Rioconcho soil patterns guide planning, but we do not treat them as test borings. Clay can cling to the reamer and grip pipe, so the crew may need staged reaming and a same day pullback.

USDA soil survey, inside the Christoval mapped community boundaryWhat is mapped
Soil series mappedTarrant 83 percent, Angelo 12 percent and Rioconcho 5 percent
Texture at the surfacecobbly clay 83 percent, clay loam 13 percent and silty clay loam 4 percent
Texture about 40 inches downbedrock 83 percent and silty clay loam 15 percent
Engineering class about 40 inches downlean clay (CL) 12 percent and fat clay (CH) 5 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches83 percent of the area (83 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Hard bedrock is mapped within 60 inches across 83% of Christoval, while weathered bedrock is not mapped there. A seasonal water table is not mapped within 60 inches, but flood prone soils cover 5%, including areas that need care near the South Concho River. The USDA survey maps high steel corrosion risk across 100% of the area, so the line owner should consider casing and tracer wire materials. Limestone clast loamy colluvium is a Quaternary unit, and Edwards limestone is mapped as Albian.

How do crews handle bedrock in Christoval?

In Christoval, we plan for Tarrant soil and shallow mapped bedrock to change the feel of the bore along a route such as Playland Park Road. On Main Street, we track the drill head from the surface and log depth and pitch to document the bore path.

  1. Tarrant soil is commonly cobbly clay, which can stick to the reamer; we can use thinner drilling fluid, polymer and staged reaming along a route such as Main Street.
  2. With hard bedrock mapped close to the surface in Christoval, we allow for slower drilling and use rock drilling equipment where the ground calls for it.
  3. Because the survey maps high steel corrosion risk across Christoval, the line owner should consider casing and tracer wire materials; HDPE does not share that steel concern.
  4. Before drilling near a marked line by Playland Park Road, we expose it with hydrovac potholing; a locator tracks the head and records depth and pitch.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where does a line have to go under US 277 in Christoval?

US 277 runs 2.7 mapped roadway miles inside the Christoval community boundary, and RM 2084 runs 1.2 miles. Main Street, Playland Park Road and Loop 110 are among the longest named local streets, so the route pin matters when a line must pass beneath pavement or a driveway. We bore beneath existing pavement rather than cut across it. A street crossing plan also needs to account for the Tarrant soil and shallow mapped bedrock that may affect the bore path.

CrossingTypeMapped extentWho has a say
US 277US highway2.7 roadway miles insideState highway office
RM 2084State highway1.2 roadway miles insideState highway office
South Concho Irregation CanalStream0.36 channel miles insideChecked for Corps of Engineers jurisdiction
South Concho RiverStream0.04 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the community or within one mile, and no street and rail crossings are mapped in Christoval. The South Concho Irregation Canal runs 0.36 channel miles and the South Concho River 0.04 channel miles inside the boundary. Two mapped street crossings of named streams make route and depth checks relevant. No lakes or ponds are mapped within one mile, so the South Concho waterways are the local water crossings to consider.

Who has to sign off on a Christoval bore in Tom Green County?

Christoval has no city government, so street authority rests with Tom Green County or the state according to the road; US 277 and RM 2084 are state highways. A TxDOT utility permit is needed for work in their right of way, with review by the TxDOT San Angelo District. The line owner submits the application through TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. For electric and communication crossings, the stated cover is at least 60 inches below the lowest point of the crossed grade; water crossings also call for 60 inches, and pressurized sewer crossings for 60 inches. The district may set another depth. South Concho River or canal work is checked for Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities may have lines in Christoval, Tom Green County?

The water provider for a specific Christoval address has to be confirmed with Tom Green County or the local water district before a bore is planned; the available information does not identify a provider, source, connections or people served for the address. Electric service reported in Tom Green County includes AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric Cooperative. Those reports do not establish which company owns a line along Main Street, so confirm the owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric CooperativeElectric utilities reporting service in Tom Green CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Christoval’s median housing year at 1983; 28% of homes were built before 1960, 36% from 1960 to 1999 and 36% in 2000 or later. Older streets such as Anson Street may have existing lines to work around, while newer services still need a checked route. Before drilling near marked utilities along Playland Park Road, we hydrovac pothole each one on the bore path. Paint shows location, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Christoval and nearby San Angelo?

Christoval is an unincorporated community in Tom Green County, 17.0 miles south of San Angelo, the county seat and nearest larger city. Its mapped land area is 1.33 square miles, elevation is 2,108 feet, and its ZIP code is 76935. Mertzon is 19.9 miles west, Eldorado is 24.0 miles south, Grape Creek is 26.7 miles north and Carlsbad is 29.9 miles north. The trip from our Yukon yard is 400 road miles and 8.0 hours by car, which matters when planning crew mobilization for a Christoval bore.

Places near Christoval

What kinds of bores come up near Playland Park Road in Christoval?

  • Highway crossing: A route beneath US 277 needs a bore plan, TxDOT right of way coordination and cover suited to the line being installed.
  • Street service: A water or sewer route beneath Main Street can avoid an open cut across pavement, with the route checked for buried utilities first.
  • Fiber conduit: A line along Playland Park Road needs a checked path through Tarrant soil and any shallow bedrock shown by site conditions.
  • Creek crossing: A bore near the South Concho River or South Concho Irregation Canal needs a planned depth and a jurisdiction check.
  • State road bore: Work in the RM 2084 right of way follows the TxDOT permit process for the line owner’s application.
  • Electric conduit: Along Loop 110, confirm the electric line owner for the specific address before setting the conduit bore route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Christoval bore near Main Street?

A map pin or address matters in Christoval because a route near Main Street may involve pavement, existing utilities or a South Concho waterway. Send what the line will carry, its pipe or conduit size and the footage. A sketch or plans help us see the intended route and crossing points before we scope the bore.

A simple route beside Main Street with clear access is easier to plan than one that threads beneath US 277 or a South Concho channel. The price depends on length, pipe or conduit size, Tarrant soil and hard bedrock, utility crossings that need exposure, pavement, drainage crossings, pits and excavator time. We account for the 400 road miles from Yukon when planning mobilization to Christoval. Plans, access details and the line owner’s requirements help define the work before a quote is prepared.

Questions people ask about boring in Christoval

Does Trinity Boring Solutions take jobs in Christoval, Tom Green County, and who staffs them?

Yes. We take directional boring work in Christoval, and the work is handled by our own crews or crews from partner drilling contractors we have vetted. Our main office is in Yukon, Oklahoma, and you work with Trinity from the first call through the bore log, whether a crew is coming from the Yukon yard or a partner yard.

Who controls Loop 110 in Christoval, and can a bore avoid cutting the street?

Christoval is unincorporated and has no city government, so county or state authority applies according to the road. A bore under Loop 110 can pass beneath the pavement without an open cut, subject to the route and any right of way approval that applies. We check marked utilities before drilling near them.

Do older lines near Playland Park Road in Christoval need replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1983, with 28% of homes built before 1960. That can mean replacement work alongside existing services, but the age of a house does not establish the age of a buried line. Along Playland Park Road, the actual route and exposed utility locations guide the bore plan.

Does Tarrant soil in Christoval corrode steel, and what pipe should go in?

The USDA soil survey maps high steel corrosion risk across 100% of Christoval, including the areas mapped as Tarrant soil. The line owner chooses suitable materials for steel casing and tracer wire. For Angelo soil areas, we account for the fact that HDPE is not affected by this soil corrosion concern. Confirm the planned material and route before a bore near US 277.

What ground does a bore pass through in Christoval’s Tarrant soil?

The USDA soil survey maps Tarrant soil across 83% of Christoval, with cobbly clay as the surface texture across the same share. At about 40 inches, bedrock is mapped across 83% and silty clay loam across 15%. Those mapped patterns are not test borings. A route near Main Street still needs site checks because ground can vary along the bore.

Is there rock near the surface in Christoval, and how much bedrock is mapped?

Yes. The USDA soil survey maps bedrock within 60 inches across 83% of Christoval, and the mapped bedrock in that area is hard rather than weathered. That can slow a bore compared with dirt and may call for rock drilling equipment. The map does not replace checking the actual route near the South Concho River.

What bore sizes and lengths can Trinity handle on Anson Street in Christoval?

For bore planning near South Concho River, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route under Anson Street still depends on access, utilities, Tarrant soil and any bedrock encountered. Send the intended material, size and footage so we can assess the job scope.

How much notice does Texas811 need for a Christoval bore near Main Street?

Texas811 needs the locate request at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and it cannot be made more than 14 days ahead. On Tom Green County jobs, we make a new request if the start moves more than 14 days past the original notice. Have marks refreshed through Texas811 if they wear off or move before work continues near Main Street.

What affects directional boring costs under US 277 in Christoval?

The route and scope determine the price, not one factor alone. Length, line size, Tarrant soil and hard bedrock, exposed utility crossings, pavement, creek or drainage work, pits and equipment time all matter. A bore under US 277 also needs the applicable TxDOT coordination, and the 400 road miles from Yukon affect mobilization.

Where the Christoval facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Christoval

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Christoval, Texas

Type the address of your job in Christoval. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Christoval

All counties: Texas county list.