Bayside Texas Directional Boring: Victoria Clay, FM 136 And Delta Sand And Silt
Quick Answer: Bayside is an incorporated town, and the town controls routes on 3rd Street and First Street. We take directional boring, also called horizontal directional drilling (HDD), work in Texas for routes under FM 136 and other Bayside streets. The Yukon main office is 569 road miles away, a factor for a bore near FM 1257. Victoria clay is common in the USDA soil survey, so sticky cuttings and fluid pressure need attention.
Bayside bores at a glance
- Incorporated city in Refugio County, Texas. Population 280 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 569 miles, about 10.9 hours of driving.
- Ground: Victoria soil is mapped on 38 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 136 and FM 1257. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Public water: Town of Bayside, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring along FM 136 in Bayside?
We take directional boring work in Bayside, including routes beneath FM 136 and 3rd Street. Bayside is an incorporated town in Refugio County, where the Census Bureau Vintage 2024 estimate puts the population at 280. Our crews install water, sewer, gas, electric conduit and fiber lines, including a water service along First Street or fiber conduit beneath 3rd Street.
Our main office is in Yukon, Oklahoma, and Bayside work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. That reach is different from a typical Bayside service or street crossing. We are a family business started 1965, and we have done directional boring since 1982.

What does the soil survey show about Victoria soil in Bayside?
The USDA soil survey maps Victoria soil across 38 percent of Bayside, with Victoria clay at 32 percent of the mapped area. Surface texture is clay across 64 percent and fine sandy loam across 31 percent. About 40 inches below the surface, clay is mapped across 66 percent, while sandy clay loam covers 29 percent; the average clay content at that depth is 46 percent. These are mapped soil patterns, not test borings, so a route near 3rd Street still needs site specific planning.
| USDA soil survey, inside the Bayside city limits | What is mapped |
|---|---|
| Soil series mapped | Victoria 38 percent, Orelia 29 percent, Monteola 14 percent, Barrada 9 percent and Narta 3 percent |
| Texture at the surface | clay 64 percent, fine sandy loam 31 percent and loam 3 percent |
| Texture about 40 inches down | clay 66 percent, sandy clay loam 29 percent and clay loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 69 percent and clayey sand (SC) 29 percent |
| Average clay content about 40 inches down | 46 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 13 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 67 percent of the area |
In Bayside, we plan around Victoria soils, while bedrock is not mapped in the top five feet and deeper rock remains possible. The map shows Beaumont Formation, areas predominantly sand, of Pleistocene age, and Delta Sand and Silt of Late Pleistocene age. Seasonal water table is mapped within 60 inches across 13 percent of town, and flood prone soils across 9 percent. High steel corrosion risk covers 67 percent, so the line owner should choose casing and tracer wire materials; We account for Bayside’s clay soils when selecting materials; HDPE is not affected by soil corrosion. Victoria clay can hold a hole open but stick to the reamer and grip pipe.
How do we drill through clay in Bayside?
Victoria clay and the mapped fine sandy loam call for different fluid control on a Bayside bore. We adjust the reaming sequence and watch returns so the hole stays stable without pushing fluid toward pavement on 3rd Street.
- Victoria clay can cling to the reamer, so we use a thinner fluid mix with polymer, open the hole in stages and pull pipe the same day the hole is opened.
- Where a Bayside route reaches the fine sandy loam mapped around Orelia soil, we manage fluid to limit washout and maintain steering under pavement such as 3rd Street.
- The USDA survey maps heavy clay in Bayside, so we watch fluid returns closely near FM 136 to avoid pressure lifting pavement.
- Before a bore beneath First Street, we hydrovac expose each marked utility on the path, then track the drill from the surface and log depth and pitch.

Where does a line have to go under 3rd Street in Bayside?
Bayside has FM 136 and FM 1257 within its limits, so a route crossing either state highway needs a plan for its right of way. FM 136 has 2.0 mapped roadway miles in town, and FM 1257 has 1.5. The longest named streets include 3rd Street at 2.52 miles, 1st Street at 2.13 miles and 2nd Street at 1.56 miles. First Street adds 1.18 miles. These street lengths help identify the route, but the actual crossing points determine the bore layout.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 136 | State highway | 2 roadway miles inside | State highway office |
| FM 1257 | State highway | 1.5 roadway miles inside | State highway office |
Public mapping shows no railroad inside Bayside or within one mile, and none of the mapped streets is a railroad crossing. No stream is mapped inside town or within one mile, and no mapped street crosses a named stream. No lake or pond is mapped within one mile. That means a typical 3rd Street route is planned around pavement and buried utilities rather than a mapped rail or stream crossing; a water crossing, if proposed, still needs a jurisdiction check during planning.
Whose permission does a Bayside bore in Refugio County need?
For Bayside streets such as 3rd Street, the town is the local street authority; FM 136 and FM 1257 are state highways reviewed by TxDOT’s Corpus Christi District. The utility that owns a line crossing a state highway right of way files the application in TxDOT’s online RULIS system. We prepare the bore plan and profile for that filing and work under the permit issued to the line owner. TxDOT cover rules call for 60 inches at highway crossings for electric, communication and water lines, and 60 inches for pressurized sewer. Along the right of way, the stated cover is 48 inches for electric and communication, and 36 inches for water. TxDOT requires boring or tunneling beneath existing highway pavement; the district may set a different depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near the Town of Bayside water lines?
The Town of Bayside public water system uses groundwater wells and reports 220 service connections serving 325 people. A service route near Copano Bay Drive still needs its specific buried line locations checked. Utilities reporting electric service in Refugio County are AEP Texas Central, San Patricio Electric Cooperative and Victoria Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore, rather than assuming one provider covers every Bayside street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Town of Bayside | Public water system | Groundwater wells | 220 connections, 325 people served |
| AEP Texas Central, San Patricio Electric Cooperative and Victoria Electric Cooperative | Electric utilities reporting service in Refugio County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Bayside’s median housing year at 1984; 19 percent of housing was built before 1960, 49 percent from 1960 to 1999 and 32 percent in 2000 or later. A route along 1st Street could serve a replacement line or a newer service, and the age alone does not identify what is buried. We hydrovac expose every marked utility on the bore path before drilling near it; paint shows position, not depth. For a proposed line beneath 3rd Street, that means daylighting each marked crossing before the drill approaches.

What is near Bayside, including Rockport?
Bayside is in Refugio County, covers 1.02 square miles and sits at an elevation of 17 feet. ZIP code 78340 covers the town. Tradewinds is 7.6 miles southwest, while Rockport is 10.4 miles east and Fulton is 10.6 miles east. Refugio, the county seat, is 15.1 miles north. The Yukon, Oklahoma main office is 569 road miles away, or a 10.9 hour drive, which affects mobilization for work along FM 136 as well as service routes outside town.
Places near Bayside
- Directional boring in Tradewinds: 7.6 miles southwest
- Directional boring in Rockport: 10.4 miles east
- Directional boring in Fulton: 10.6 miles east
- Falman: 11.9 miles south
- Directional boring in Woodsboro: 12 miles northwest
Which jobs call for a bore under 1st Street in Bayside?
- State highway crossing: A bore beneath FM 136 needs a route and profile for the line owner’s TxDOT permit application.
- Street crossing: A water or sewer line under 3rd Street can pass beneath pavement while entry and exit pits stay in dirt.
- Water service: A connection near the Town of Bayside system needs the specific route and marked lines checked before drilling.
- Electric conduit: A crossing near FM 1257 starts with confirming the line owner because Refugio County providers do not identify every address.
- Fiber drop: Conduit beneath First Street can avoid an open cut across pavement, with marked utilities exposed along the bore path.
- Service extension: A line along Copano Bay Drive needs a mapped route, size and footage to plan around Bayside’s clay.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring near First Street in Bayside?
For a Bayside quote, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help. A route under First Street is easier to assess when the crossing points and nearby marked utilities are shown. We use those details to define the bore path and the equipment and access the job requires.
The 569 road miles from Yukon affect mobilization for a job near First Street. Victoria clay can change reaming time and fluid control, while a route under FM 136 brings a TxDOT permit and cover requirements into the plan. Price also depends on length, line size, utilities to expose, pavement or concrete, creek or drainage crossings, pits, excavator time, sand backfill and emergency or high profile work. The route and its conditions set the scope, not a single feature of Bayside.
Questions people ask about boring in Bayside
Does Trinity Boring Solutions take jobs in Bayside and Refugio County?
Yes. We take directional boring work in Bayside and across Texas, with our own crews and partner contractor satellite yards supporting the work. Trinity remains the contact from the first call through the bore log, including a route under FM 136. The customer deals with Trinity whichever crew is on site.
Does Victoria soil in Bayside corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 67 percent of Bayside, including areas with Victoria soil. The line owner should consider material and coating choices for steel casing and tracer wire. We account for Bayside’s clay soils when selecting materials; HDPE is not affected by soil corrosion. The survey flags a planning concern, not a site test result for a particular address.
What ground will a bore through Victoria soil in Bayside encounter?
The survey maps Victoria soil across 38 percent of Bayside, and clay is the leading surface texture at 64 percent. About 40 inches down, clay covers 66 percent of the mapped area, with sandy clay loam at 29 percent. That clay can hold the hole but may stick to the reamer, so the bore plan accounts for staged reaming and fluid control.
Could a directional bore near FM 136 in Bayside encounter rock?
Bedrock is not mapped in Bayside’s top five feet, which does not rule out deeper rock. The geologic map shows Beaumont Formation, areas predominantly sand, of Pleistocene age, and Delta Sand and Silt of Late Pleistocene age. Those map units describe the area, not the exact materials along a bore under 3rd Street.
Who approves a bore beneath FM 136 in Bayside?
TxDOT’s Corpus Christi District reviews work in the FM 136 right of way. The utility owner, not the drilling contractor, files the utility permit in TxDOT’s RULIS system; we prepare the bore plan and profile for that application. Bayside streets such as First Street are town streets, not state highway right of way.
Who runs Bayside’s water system in Refugio County, and where is its water sourced?
The Town of Bayside owns the public water system, which draws from groundwater wells. For underground work near FM 1257 in Bayside, we use the reported 220 service connections serving 325 people as a utility coordination reference. A planned tie in near Copano Bay Drive still needs its exact route and buried utilities confirmed before we set a bore path.
Does Trinity cover Tradewinds and rural sites outside Bayside?
Yes. We take work beyond Bayside, including routes near Tradewinds, 7.6 miles southwest, and rural sites across Texas. The job location affects mobilization from the Yukon main office, and a route near FM 1257 still needs its own utility and access review.
How much notice does Texas811 need for a bore near 3rd Street in Bayside?
For a bore near 3rd Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes that as two working days. If the start moves more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
For directional boring near FM 136 in Bayside, we consider the TxDOT Corpus Christi District permit office and clay soils when pricing work?
The route length and pipe or conduit size matter, along with Bayside’s Victoria clay, utilities that must be exposed and any pavement or concrete crossing. Work in the FM 136 right of way adds permit planning and cover requirements. Drainage crossings, pits, excavator time, backfill, emergency work and the drive from Yukon also affect the scope.
Where the Bayside facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bayside
- U.S. Census Bureau, TIGER/Line 2024: Bayside boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Bayside
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bayside housing units and year built
- Macrostrat geologic map compilation: map units under Bayside
- U.S. EPA Safe Drinking Water Information System: public water systems serving Bayside
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Refugio County
- U.S. Geological Survey, Elevation Point Query Service: Bayside elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bayside
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bayside
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bayside, Texas
Type the address of your job in Bayside. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bayside
Same county: Refugio · Tivoli · Austwell. All counties: Texas county list.
