trinityboringsolutions.com

Beach City Texas Directional Boring: Morey Loam, H L and P Canal, FM 2354

Quick Answer: Can a line pass beneath a Beach City road or the H L and P Canal without cutting the surface? Yes. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work here for routes under Ocean Drive and other local crossings. Beach City is 494 road miles from our Yukon, Oklahoma main office, so a route near FM 2354 affects mobilization planning. Morey soil and clay loam below the surface can make cuttings sticky and call for staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Beach City bores at a glance

  • Incorporated city in Chambers County, Texas. Population 3,456 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 494 miles, about 9.6 hours of driving.
  • Ground: Morey soil is mapped on 44 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 2354. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: H L and P Canal.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for a bore under the H L and P Canal in Beach City?

Can a line pass beneath an Ocean Drive crossing without cutting the surface? We take directional boring work in Beach City, an incorporated city in Chambers County with a population of 3,456, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber lines, including routes that need to pass below Ocean Drive or other Beach City streets.

Our main office is in Yukon, Oklahoma, and Beach City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a route near Ocean Drive, our record of more than 25 years without a utility strike matters alongside electric service reported in Chambers County by CenterPoint Energy and Entergy Texas. Our family business began in 1965, and we have done directional boring since 1982; Beach City is 494 road miles from our Yukon main office.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Morey soil like to bore in Beach City?

The USDA soil survey maps Morey soil across 44 percent of Beach City, with Morey Urban land complex, 0 to 1 percent slopes, covering 32 percent of the mapped area. At about 40 inches below the surface, clay loam is mapped under 54 percent of the city, and clay under 32 percent. Surface textures include loam under 44 percent and clay under 29 percent. Our mapped Morey and League soil patterns guide bore planning, but they are not test borings. The clay rich ground can cling to a reamer, so the drilling plan may need staged passes and careful fluid control.

USDA soil survey, inside the Beach City city limitsWhat is mapped
Soil series mappedMorey 44 percent, League 27 percent, Texla 12 percent and Meaton 10 percent
Texture at the surfaceloam 44 percent, clay 29 percent and silt loam 22 percent
Texture about 40 inches downclay loam 54 percent, clay 32 percent and silty clay loam 12 percent
Engineering class about 40 inches downlean clay (CL) 66 percent and fat clay (CH) 32 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches96 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel98 percent of the area

Along Ocean Drive in Beach City, we treat bedrock as unmapped in the top five feet, without ruling out deeper rock. The USDA soil survey maps a seasonal water table within 60 inches under 96 percent of the area, so pits near Morey soil may need pumping. Flood prone soils cover 1 percent. High steel corrosion risk is mapped under 98 percent, so the line owner should choose any steel casing or tracer wire protection; HDPE avoids that steel concern. The geologic map shows Delta sand, silt, and gravel of Pleistocene age, a mix that can vary along a bore.

How is a bore run through Beach City clay loam?

Beach City has clay loam mapped under about 40 inches and a shallow seasonal water table across much of the area. We use the route, access and ground conditions to set the bore plan before the drill moves.

  1. With clay loam mapped under about 40 inches in Beach City, we can use staged reaming to manage sticky cuttings before pulling pipe through.
  2. Because a seasonal water table is mapped within 40 inches under 50 percent of the area, pits near Point Barrow Road may need pumping.
  3. We hydrovac pothole every marked utility along the planned path before the drill approaches; along Ocean Drive, paint shows location but not depth.
  4. We track the drill head from above ground and record depth and pitch, which helps keep a route near FM 2354 on its planned line.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a line go under Ocean Drive in Beach City?

FM 2354 is the state highway mapped inside Beach City, with 0.2 roadway miles in the city. Texas State Highway 99 is 1.0 mile from the limits. Ocean Drive is the longest named street, at 2.0 miles in the city, followed by Point Barrow Road at 1.58 miles and McCollum Park Road at 1.4 miles. A bore below one of these routes can keep its pavement intact, with entry and exit pits placed off the paved path where access allows.

CrossingTypeMapped extentWho has a say
FM 2354State highway0.2 roadway miles insideState highway office
Texas State Highway 99Highway nearby1 miles outsideState highway office
H L and P CanalStream1.3 channel miles insideChecked for Corps of Engineers jurisdiction
Barbers Hill CanalStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
H L and P Cooling PondLake or pond161 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Beach City or within 1 mile outside its limits, so no local track crossing is identified. The H L and P Canal runs 1.3 channel miles in the city, and Barbers Hill Canal is 0.4 mile beyond the limits. None of the mapped streets cross a named stream in the city. The H L and P Cooling Pond, a 161 acre pond, lies outside the city limits but within 1 mile; a proposed water crossing there needs site specific planning.

Who approves work near FM 2354 in Beach City?

Beach City is incorporated, so city streets such as Ocean Drive belong to the city itself. A bore in the FM 2354 right of way needs a TxDOT utility permit, reviewed by the TxDOT Beaumont District. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. TxDOT sets cover requirements, including 60 inches for electric or communication lines at highway crossings and 60 inches for water lines. A route under the H L and P Canal is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Beach City and Chambers County?

The water provider for a specific Beach City address has to be confirmed with the city, Chambers County or the local water district before a bore is planned. EPA drinking water records do not tie a provider to this town. CenterPoint Energy and Entergy Texas report electric service in Chambers County, but that does not establish which company serves a particular address. Before an electric conduit bore near FM 2354 or Ocean Drive, confirm the line owner for that route.

Line ownerWhat it isSourceSize
CenterPoint Energy and Entergy TexasElectric utilities reporting service in Chambers CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Beach City’s median housing year is 1997; we still assess each bore route because home age does not establish underground conditions. The survey estimates 5 percent of housing was built before 1960, 54 percent from 1960 to 1999, and 41 percent in 2000 or later. That mix can mean both replacement work and new service routes along Lawrence Road or Point Barrow Road. We hydrovac pothole each marked utility on the bore path before drilling near it; surface marks show position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Beach City in relation to Cove and Baytown?

Beach City is in Chambers County, Texas, at an elevation of 28 feet and covers 4.48 square miles. Its ZIP code is 77523. Cove is 5.6 miles north, Baytown is 7.5 miles west, and Mont Belvieu is 7.9 miles north. Anahuac, the county seat, is 10.2 miles east. From our Yukon, Oklahoma main office, the road distance is 494 miles and the drive is 9.6 hours. That distance is part of planning a crew and equipment move for a job near Ocean Drive.

Places near Beach City

What kinds of bores could come up on Point Barrow Road in Beach City?

  • Highway crossing: A line below FM 2354 needs a route and cover plan for the state highway right of way.
  • Street crossing: A bore under Ocean Drive can keep the paved route uncut, with pits set on either side.
  • Canal crossing: A proposed route below the H L and P Canal needs review of the channel and agency jurisdiction.
  • Water service: A new service near Lawrence Road needs the address specific water provider confirmed before planning the connection.
  • Fiber conduit: A fiber route along Point Barrow Road can be bored beneath a driveway or street to avoid an open cut.
  • Park route: A utility route near Mc Collum Park needs a path that accounts for marked lines and available work space.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Beach City bore near Lawrence Road?

Start with a map pin or address on Lawrence Road, since the exact route can change which utilities, pavement or drainage features a bore must pass. For work near Ocean Drive, tell us what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans help us check the proposed path and access before preparing a quote for Beach City.

Morey soil and clay loam are the first pricing considerations because sticky cuttings and shallow groundwater can affect reaming and pit work. The route also matters: an FM 2354 crossing brings highway permit planning, while a path under the H L and P Canal needs crossing review. Pipe size, bore length, marked utilities to expose, pavement, drainage, pit work and sand backfill all affect the scope. Mobilization from Yukon also matters for a Beach City job.

Questions people ask about boring in Beach City

Does Trinity Boring Solutions take jobs in Beach City and Chambers County?

Yes. We take directional boring work in Beach City and staff it with our own crews or crews from satellite yards operated by drilling partners we have vetted. You work with Trinity from the first call through the bore log, whether the route is near Ocean Drive or elsewhere in Chambers County.

Can Morey soil in Beach City corrode a steel casing?

The USDA soil survey maps high steel corrosion risk across 98 percent of Beach City, including areas with Morey soil. The line owner chooses coatings or other protection for steel casing and tracer wire. HDPE is not subject to the same soil corrosion concern, so the pipe material should match the project and owner’s requirements.

What ground does a Beach City bore pass through in Morey soil?

Morey is the most common mapped soil series in Beach City, covering 44 percent of the area. At about 40 inches deep, the USDA soil survey maps clay loam under 54 percent and clay under 32 percent. These are survey patterns, not test borings, but the clay can cling to the reamer and affect drilling fluid choices.

Will our planned bore in Beach City near FM 2354 encounter rock?

Bedrock is not mapped in Beach City’s top five feet, but deeper rock is still possible. The geologic map shows Pleistocene age Delta sand, silt, and gravel. That material can vary along a route, so a proposed bore near Ocean Drive should be planned from site conditions rather than treating the map as a test of the exact alignment.

Who approves a Beach City bore under FM 2354?

TxDOT reviews a utility permit for work in the FM 2354 right of way through its Beaumont District. The utility owner files the application in TxDOT’s RULIS system, while we provide the bore plan and profile and work under the issued permit. The district’s permit sets the approved route and cover requirements.

Can a line be bored beneath the H L and P Canal in Beach City?

A bore beneath the H L and P Canal can be considered, but the channel and proposed route need review during planning. The canal runs 1.3 channel miles in Beach City, and a water crossing is checked for U.S. Army Corps of Engineers jurisdiction. Site access and ground conditions also affect where the pits can go.

What bore sizes and lengths can you handle near Lawrence Road in Beach City?

For work near H L and P Canal, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A project near Lawrence Road depends on the route, pipe or conduit size, ground and crossings. Send a map pin or address and any sketch or plans so we can assess the scope.

How early should I call Texas811 for a Beach City bore near Ocean Drive?

For a bore near Ocean Drive, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For Beach City work through TxDOT Beaumont District, if the start slips more than 14 days past the original notice, we make a new request. Before continuing work near Cedar Point Road, we have worn or moved marks refreshed through Texas811.

What affects the cost of our directional boring near FM 2354 in Beach City, including route length and installation details?

The job scope sets the price, with Morey soil and shallow groundwater affecting drilling and pit work. Bore length, pipe size, utilities to expose, pavement, drainage crossings, pits and backfill also matter. An FM 2354 route adds highway permit planning, and the 494 road miles from Yukon affect mobilization. High profile or emergency work can change the required scope.

Where the Beach City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Beach City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Beach City, Texas

Type the address of your job in Beach City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Beach City

Same county: Winnie · Anahuac · Stowell · Oak Island. All counties: Texas county list.