trinityboringsolutions.com

Heath Texas Directional Boring: Houston Black Soil, FM 740 and Buffalo Creek

Quick Answer: FM 740 and Buffalo Creek are the crossings we plan around as Trinity handles directional boring, also called horizontal directional drilling (HDD), in Heath and across Texas. The Yukon main office is 240 road miles from Heath, so a Smirl Drive quote needs access and mobilization planned with the route. Houston Black soil is sticky heavy clay that can grip pipe, so we manage fluid and ream in stages. Along FM 549, we expose marked utilities before drilling near them.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Heath bores at a glance

  • Incorporated city in Rockwall County, Texas. Population 11,499 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 240 miles, about 4.7 hours of driving.
  • Ground: Houston Black soil is mapped on 52 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 19 percent of the area.
  • Highways inside the boundary: FM 740, FM 549, FM 550, FM 1140 and FM 3097. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Buffalo Creek, Little Buffalo Creek, Long Branch and Rush Creek.
  • Public water: City of Heath, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Heath and Rockwall County?

Trinity Boring Solutions takes directional boring work in Heath, where Rockwall County accounts for 99 percent of the city. The Census Bureau Vintage 2024 estimate puts Heath at 11,499 people. For a route along FM 740 or Buffalo Way Road, we install water, sewer, gas, electric conduit and fiber lines by bore, with the size and path set for the job.

Our main office is in Yukon, Oklahoma, and Heath work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For planning a Buffalo Creek crossing in Heath, our family business brings a history that began in 1965 and directional boring experience dating to 1982. That experience covers 3/4 inch service lines through 48 inch casing, for work ranging from a Buffalo Creek service crossing to a larger FM 740 utility route.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does a Heath bore meet in Houston Black soil?

Houston Black soil is the largest mapped soil series in Heath, covering 52 percent of the area in the USDA soil survey. About 89 percent of Heath is mapped as clay at 40 inches below the surface, with an average clay content of 53 percent at that depth. That is heavy, sticky ground, not an easy flowing sand. It can ball up on the reamer and swell around pipe, so the bore plan needs controlled fluid and staged reaming.

USDA soil survey, inside the Heath city limitsWhat is mapped
Soil series mappedHouston Black 52 percent, Ferris 19 percent, Altoga 10 percent, Heiden 9 percent and Trinity 9 percent
Texture at the surfaceclay 89 percent and silty clay 10 percent
Texture about 40 inches downclay 89 percent and silty clay 10 percent
Engineering class about 40 inches downfat clay (CH) 89 percent and lean clay (CL) 10 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches19 percent of the area (0 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches4 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches in 19 percent of Heath, with typical bedrock depth at 43 inches; hard bedrock is not mapped within that depth. A seasonal water table is mapped within 60 inches in 4 percent, while flood prone soils cover 9 percent. With Heath’s clay surface soil, the line owner should consider casing and tracer wire materials where high steel corrosion risk is mapped across 99 percent. The Cenozoic Silty Clay Decomposition Residuum is strongly smectitic, which can expand when wet and crack when dry.

How do we drill Heath clay without losing control of the bore?

Heath’s heavy Houston Black clay calls for a controlled fluid program and staged reaming. Along Buffalo Creek or a paved road, we also track returns so pressure does not lift the surface.

  1. On Houston Black clay, we use a thinner fluid mix with polymer and open the hole in stages to limit sticky cuttings on the reamer.
  2. Because heavy clay can swell around pipe, we plan to pull pipe the same day the final hole is opened near Country Club Drive.
  3. At a Buffalo Creek crossing, we watch fluid returns and manage pressure so the bore does not lift the creek bank or nearby surface.
  4. Before a bore under FM 740, we hydrovac pothole marked utilities, then track the drill head from the surface and log depth and pitch.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What is in the way of a new line in Heath near Buffalo Creek?

FM 740 runs 8.1 mapped roadway miles inside Heath, with FM 549, FM 550, FM 1140 and FM 3097 also crossing the city. Texas State Highway 205, US 67 and Interstate 30 sit within 1.5 miles outside the limits. Smirl Drive is the longest named street at 2.45 miles, followed by Country Club Drive at 2.08 miles and Buffalo Way Road at 2.0 miles. A bore can pass beneath pavement without cutting it, subject to the applicable road approval.

CrossingTypeMapped extentWho has a say
FM 740State highway8.1 roadway miles insideState highway office
FM 549State highway2.9 roadway miles insideState highway office
FM 550State highway2.8 roadway miles insideState highway office
FM 1140State highway2.5 roadway miles insideState highway office
FM 3097State highway1.5 roadway miles insideState highway office
Texas State Highway 205Highway nearby1.1 miles outsideState highway office
US 67Highway nearby1.2 miles outsideState highway office
Interstate 30Highway nearby1.2 miles outsideState highway office
Buffalo CreekStream5.81 channel miles insideChecked for Corps of Engineers jurisdiction
Little Buffalo CreekStream2.04 channel miles insideChecked for Corps of Engineers jurisdiction
Long BranchStream1.33 channel miles insideChecked for Corps of Engineers jurisdiction
Rush CreekStream1.32 channel miles insideChecked for Corps of Engineers jurisdiction
Yankee CreekStream1.32 channel miles insideChecked for Corps of Engineers jurisdiction
Brockway BranchStream0.23 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Heath or within 1 mile outside it, so the mapped street and rail crossing count is none. Buffalo Creek runs 5.81 channel miles in the city, and mapped street crossings of named streams total 14. Little Buffalo Creek adds 2.04 channel miles. Lake Ray Hubbard runs along or touches the city boundary, so a proposed water crossing is checked for federal jurisdiction during planning.

Whose permission does a Heath bore under FM 740 need?

A bore in the FM 740 right of way needs a TxDOT utility permit, with review by the TxDOT Dallas District; the utility owner files through the online RULIS system, and we prepare the bore plan and profile for that application. Under FM 740, the cover target depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. A permit can set another depth. Heath is incorporated, so its city streets are under city authority. No railroad agreement applies to a mapped track in Heath, while Buffalo Creek planning includes a check for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities may be in the ground in Heath and Rockwall County?

The City of Heath public water system uses purchased surface water and reports 4,610 service connections serving 10,464 people. That system may be relevant to a water service near FM 740, but the exact line still needs locating. Oncor Electric Delivery Company and Farmers Electric Cooperative report electric service in Rockwall County; we confirm the owner for the specific address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of HeathPublic water systemSurface water bought from another system4,610 connections, 10,464 people served
Oncor Electric Delivery Company and Farmers Electric CooperativeElectric utilities reporting service in Rockwall CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Heath’s median housing year at 2001; 53 percent of housing units were built in 2000 or later, and 1 percent before 1960. A replacement route near Country Club Drive may meet existing lines, while a newer service may need a different path. We hydrovac pothole every marked utility on the bore route before drilling near it; a proposed crossing under Buffalo Way Road gets the same check.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Heath from Travis Ranch and our Yukon office?

Heath is in Rockwall County, at elevation 508 feet, and covers 12.36 square miles. ZIP codes serving the city are 75032 and 75126. Travis Ranch is 3.7 miles south; McLendon-Chisholm is 4.2 miles east; and Rockwall is 4.7 miles north. Rockwall is also the county seat and nearest larger city listed. From the Yukon, Oklahoma yard, Heath is 240 road miles away and a 4.7 hour drive, which matters when planning crew mobilization for a Smirl Drive bore.

Places near Heath

What would we bore near Buffalo Way Road in Heath?

  • Highway crossing: A line under FM 740 is planned as a bore beneath existing pavement, with the utility owner handling the TxDOT permit.
  • Water service: A connection near the City of Heath water system needs a route that accounts for existing lines around FM 549.
  • Fiber conduit: A conduit run along Smirl Drive can pass beneath pavement and driveways without opening a trench across the route.
  • Creek crossing: A Buffalo Creek bore needs a planned depth beneath the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street replacement: A replacement line near Country Club Drive can be bored beneath the street after marked utilities are exposed.
  • Drainage crossing: A route near Little Buffalo Creek needs room for entry and exit pits while keeping the channel crossing intact.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Heath bore near Smirl Drive?

A map pin matters on Smirl Drive because the exact route changes which streets, utilities and access points a bore must account for. For an FM 740 project in Heath, send us the address or pin, what is going in the ground, pipe or conduit size, and footage. A sketch or plans help us check the route before we set the scope.

Price follows the work at the specific Heath site. Houston Black clay affects fluid, reaming and pipe handling; crossings of FM 740, Buffalo Creek or marked utilities add planning and exposure work. Pavement, concrete, pits, excavator time and sand backfill also affect the job. Access and mobilization matter too, including the 240 road miles from the Yukon yard. High profile or emergency work can change the work plan.

Questions people ask about boring in Heath

Does Trinity take directional boring work in Heath and Rockwall County, and who staffs it?

Yes, we take directional boring jobs in Heath and staff them with our own crews or crews from partner drilling contractors we have vetted. The Yukon office coordinates the work, including a route along FM 740, so you deal with Trinity through the job and bore log regardless of which crew is on site.

Who owns electric lines in Heath and Rockwall County, and who confirms conduit specs?

Oncor Electric Delivery Company and Farmers Electric Cooperative report electric service in Rockwall County, but that does not identify the provider at every Heath address. We confirm the line owner for the specific FM 549 route before planning a conduit bore, and the owner can confirm the required conduit specifications.

Who controls Buffalo Way Road in Heath, and does a utility bore require cutting it?

Heath is incorporated, so Buffalo Way Road is a city street. A directional bore can pass beneath the pavement without cutting across it, with entry and exit pits placed outside the travel surface where the site allows. Existing utilities still need to be located and exposed along the planned path.

What do older lines near Country Club Drive mean for a replacement bore in Heath?

Heath’s median housing year is 2001, and the American Community Survey estimates 1 percent of housing units were built before 1960. That does not date each buried line, so a replacement near Country Club Drive needs utility locating and potholing before drilling. Boring can avoid opening the full street surface.

Does Houston Black soil in Heath corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 99 percent of Heath, where Houston Black is the leading soil series. The line owner should weigh casing and tracer wire materials for the site. HDPE is not affected by soil corrosion, but the owner selects the pipe and any steel coatings.

What ground does a Heath bore pass through in Houston Black soil?

A bore may pass through Houston Black clay, which the USDA soil survey maps across 52 percent of Heath. About 89 percent of the mapped area is clay at 40 inches below the surface. That heavy, sticky ground can load the reamer and grip pipe, so we use staged reaming and manage fluid returns.

Can I reach Trinity after hours about an urgent bore near Buffalo Way Road in Heath?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent job near Buffalo Way Road, give us the location and what line is involved so we can understand the route and response needs. Heath work is coordinated through our Yukon main office.

How much Texas811 notice is needed for a Heath bore near Smirl Drive, and what if marks move?

For a bore near Smirl Drive, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. When a Heath start slips more than 14 days past the original notice, we submit a new request for Rockwall County work. Before continuing a Smirl Drive bore in Heath, we refresh worn or moved marks through Texas811.

What affects the cost of directional boring in Heath near FM 740?

The job scope sets the price for an FM 740 bore. Length, pipe size, Houston Black clay, exposed utilities, pavement, pits and excavator time all matter. A Buffalo Creek crossing adds planning, and mobilization reflects the 240 road miles from the Yukon office. For a Rush Creek crossing in Heath, high profile or emergency work can also change our boring scope.

Where the Heath facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Heath

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Heath, Texas

Type the address of your job in Heath. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Heath

Same county: Fate · Royse City · Wylie. All counties: Texas county list.