trinityboringsolutions.com

Kingsville Texas Directional Boring: Cranell Sandy Clay Loam, US 77 and Tranquitas Creek

Quick Answer: 6th Street, Santa Gertrudis Street and Corral Avenue are among Kingsville’s longest streets, within 202.84 public road centerline miles. We do directional boring, also called horizontal directional drilling (HDD), for routes near US 77 and Union Pacific tracks. The Yukon main office is 613 road miles away, while Tranquitas Creek and local streets can shape the route. Cranell sandy clay loam and deeper clay can cling to tooling, so the bore needs controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kingsville bores at a glance

  • County seat of Kleberg County, Texas. Population 24,884 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 613 miles, about 11.9 hours of driving.
  • Ground: Cranell soil is mapped on 26 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 77, US 77 Business, US 77 Bypass, FM 1356 and Texas State Highway 141. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: Union Pacific, with 16 mapped street and rail crossings.
  • Named streams inside the boundary: Tranquitas Creek, Santa Gertrudis Creek, Santa Gertruidis Creek and Escondido Creek.
  • Public water: City of Kingsville, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Kingsville near Union Pacific?

6th Street, Santa Gertrudis Street and Corral Avenue are among Kingsville’s longest streets, within 202.84 public road centerline miles, with US 77 and Union Pacific tracks among the route features. The Census Bureau Vintage 2024 estimate puts the population at 24,884 in Kleberg County. We install water, sewer, gas, electric conduit and fiber for routes along these streets or beneath roads and tracks, with the route and line type guiding the bore plan.

Our main office is in Yukon, Oklahoma, and Kingsville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A typical Kingsville job beside that reach may be a shorter service line under Corral Avenue or a crossing planned around Union Pacific tracks.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Cranell ground in Kingsville?

The USDA soil survey maps Cranell across 26 percent of Kingsville, commonly as Cranell sandy clay loam on 0 to 1 percent slopes. Victoria clay covers 22 percent, while Clareville clay loam accounts for 20 percent. About 40 inches below the surface, the mapped texture is clay across 49 percent and sandy clay loam across 31 percent; average clay content at that depth is 42 percent. Along US 77, we use mapped patterns to guide planning, not as a substitute for test borings. For a route near Santa Gertrudis Street, actual conditions still need to be managed as the bore advances.

USDA soil survey, inside the Kingsville city limitsWhat is mapped
Soil series mappedCranell 26 percent, Victoria 22 percent, Clareville 20 percent, Czar 12 percent and Gertrudis 10 percent
Texture at the surfacesandy clay loam 32 percent, fine sandy loam 26 percent and clay 22 percent
Texture about 40 inches downclay 49 percent, sandy clay loam 31 percent and clay loam 20 percent
Engineering class about 40 inches downfat clay (CH) 68 percent and lean clay (CL) 30 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel51 percent of the area

In Kingsville, we treat the mapped top five feet as showing no bedrock, while allowing for rock deeper down. The USDA soil survey maps no seasonal water table within 60 inches and flood prone soils across 1 percent of the area, so creek routes still need depth planning. High steel corrosion risk is mapped across 51 percent, a concern for steel casing and tracer wire that the line owner should address. The geologic map shows the Pleistocene Beaumont Formation, predominantly sand, with interbedded silt and clayey abandoned channels; changing layers can affect steering and fluid returns.

What do we need to bore Kingsville clay along US 77?

Cranell sandy clay loam and the clay mapped at about 40 inches call for a controlled bore, not a rushed pull. Near Tranquitas Creek, we plan the route and depth around the mapped ground and crossing.

  1. Cranell sandy clay loam can ball up on the reamer, so we use thinner fluid with polymer and open the hole in stages.
  2. Clay mapped at about 40 inches can grip pipe; we plan the pull for the same day the hole is opened.
  3. Near US 77 pavement, we watch fluid returns and keep pressure controlled to reduce the risk of lifting the surface.
  4. At Tranquitas Creek, we plan bore depth under the channel and check the crossing for Corps jurisdiction during planning.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where does a line have to go under Tranquitas Creek in Kingsville?

US 77 has 14.1 mapped roadway miles inside Kingsville, alongside US 77 Business and US 77 Bypass. FM 1356 and Texas State Highway 141 are also among the state roads within the limits. On a street route, 6th Street extends 5.31 miles, Santa Gertrudis Street 4.11 miles, and Corral Avenue 3.68 miles within the city. These roads and the longer street network can put pavement or driveways across a service route, so the bore plan needs to account for each crossing rather than assume a straight path.

CrossingTypeMapped extentWho has a say
US 77US highway14.1 roadway miles insideState highway office
US 77 BusinessUS highway5.9 roadway miles insideState highway office
US 77 BypassUS highway1.8 roadway miles insideState highway office
FM 1356State highway4 roadway miles insideState highway office
Texas State Highway 141State highway3.5 roadway miles insideState highway office
FM 1898State highway2.9 roadway miles insideState highway office
FM 425State highway2.4 roadway miles insideState highway office
FM 1717State highway1.4 roadway miles insideState highway office
FM 3320State highway1.3 roadway miles insideState highway office
FM 2045State highway1 roadway miles insideState highway office
Spur 169State highway1 roadway miles insideState highway office
FM 1896State highway0.9 roadway miles insideState highway office
Union PacificRailroad7.36 track miles insideThe railroad
Tranquitas CreekStream3.57 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 7.36 track miles in Kingsville on its Brownsville Subdivision, and public mapping records 16 street and rail crossings in the city. A rail route needs the railroad’s crossing agreement, which sets the crossing conditions. Tranquitas Creek runs 3.57 channel miles here, and the map records 23 street crossings of named streams. Santa Gertrudis Creek and Escondido Creek are also mapped. Creek work is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Kingsville bore under US 77 in Kleberg County?

US 77 is a US highway, so work in its right of way needs a TxDOT utility permit reviewed by the TxDOT Corpus Christi District. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile for that owner’s application and work under its permit. Existing highway pavement is bored or tunneled beneath, and the permit sets the required cover. For a Union Pacific crossing in Kingsville, the railroad’s agreement sets its crossing conditions. The named creeks are checked for Corps jurisdiction during planning, while city streets belong to the City of Kingsville.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Kingsville water system?

The City of Kingsville public water system uses purchased surface water and reports 10,308 service connections serving 25,402 people. That gives a water route a local system to identify, but the line owner and route still need confirmation for the specific address. AEP Texas Central and Nueces Electric Cooperative report electric service in Kleberg County; those records do not identify the provider for every Kingsville property, so we confirm the owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of KingsvillePublic water systemSurface water bought from another system10,308 connections, 25,402 people served
AEP Texas Central and Nueces Electric CooperativeElectric utilities reporting service in Kleberg CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Kingsville’s median housing year at 1976; 25 percent of homes were built before 1960, and 25 percent in 2000 or later. A replacement route along Santa Gertrudis Street may involve older buried infrastructure, while a newer service has a different connection point to locate. Before drilling near a marked line, we hydrovac pothole it to check its depth; paint alone shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Kingsville in relation to Ricardo and our Yukon yard?

Kingsville is the county seat of Kleberg County, covers 13.88 square miles, and sits at an elevation of 61 feet. Its ZIP code is 78363. Ricardo is 6.3 miles south, and Bishop is 6.5 miles northeast; Driscoll is 13.2 miles northeast. Kingsville is on the US 77 corridor, with 613 road miles and an 11.9 hour drive from our Yukon, Oklahoma main office. Those distances matter when planning crew mobilization for a project near a creek, street or highway.

Places near Kingsville

Which jobs call for a bore near Corral Avenue in Kingsville?

  • Highway crossing: A route beneath US 77 needs a bore plan suited to the roadway and its right of way permit.
  • Street service: A water or sewer line along Corral Avenue can pass below pavement without cutting the street.
  • Fiber conduit: A route near Texas A&M University Kingsville can use a bore sized for the conduit and its path.
  • Creek crossing: A line beneath Tranquitas Creek needs depth planning and a check for Corps jurisdiction.
  • Rail crossing: A route beneath Union Pacific tracks needs the railroad’s agreement and its crossing conditions.
  • Water connection: A service near the City of Kingsville system needs the address specific line owner confirmed before planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Kingsville bore near US 77?

A map pin matters near US 77 because the exact route may cross a highway, Union Pacific track or Tranquitas Creek. For Kingsville work, send us the address or pin, underground item, pipe or conduit size, and footage so we can plan the bore. A sketch or plans can show where the route meets pavement, utilities or a creek and help us scope the bore.

Cranell sandy clay loam and the clay mapped below it make ground conditions an early pricing factor: sticky soil can build on the reamer and grip pipe. Crossings of US 77, Union Pacific tracks or Tranquitas Creek add planning and exposure needs. Pipe size, bore length, marked utilities, pavement, pits and excavator time also shape the job. At 613 road miles from Yukon, mobilization is another part of the scope, especially for urgent or high profile work.

Questions people ask about boring in Kingsville

Does Trinity take directional boring jobs in Kingsville and Kleberg County?

Yes. We take directional boring work across Texas, including Kingsville in Kleberg County. Our own crews and vetted partner contractor satellite yards support the work, and you deal with Trinity from the first call through the bore log. We plan each route around local features such as US 77, Union Pacific tracks or Tranquitas Creek.

How old are buried lines near Santa Gertrudis Street in Kingsville?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1976, with 25 percent of homes built before 1960. That does not date a particular water, sewer or electric line along Santa Gertrudis Street. For replacement work, we locate and expose marked utilities before drilling near them.

Does Cranell soil in Kingsville corrode steel, and what pipe can I use?

The USDA soil survey maps high steel corrosion risk across 51 percent of Kingsville. The line owner should consider material and coating needs for steel casing or tracer wire. HDPE is not affected by soil corrosion, but the owner selects the pipe for the line and the route, including any crossing near Tranquitas Creek.

What ground will a bore pass through in Kingsville Cranell soil?

The USDA soil survey maps Cranell sandy clay loam across 26 percent of Kingsville. At about 40 inches, clay is mapped across 49 percent and sandy clay loam across 31 percent. The mapped texture can vary along a route, so a bore near Corral Avenue is planned for sticky clay as well as changing soil conditions.

Will directional boring in Kingsville encounter rock below the mapped area?

Across Kingsville, we read the top five feet as unmapped for bedrock, not as evidence that deeper rock is absent. The geologic map identifies the Pleistocene Beaumont Formation, predominantly sand with silt and some clayey channel deposits. A route near Tranquitas Creek still needs to be steered to the ground encountered during drilling.

Who permits a bore under US 77 in Kingsville?

TxDOT’s Corpus Christi District reviews the utility permit for work in US 77 right of way. The utility that owns the line submits the application in RULIS, with our bore plan and profile supporting it. A US 77 crossing also has to follow the conditions in the issued permit.

What bore sizes and lengths can Trinity handle near King Avenue in Kingsville?

We handle lines from 3/4 inch service lines to 48 inch casing, and bore lengths from 10 feet to 5,000 feet. The size and footage near King Avenue help set equipment and the bore plan. A sketch showing nearby streets or marked utilities can help describe the route.

How much 811 notice does a Kingsville bore near 6th Street need?

Count back at least two working days from the planned start near 6th Street, excluding Saturdays, Sundays and legal holidays; do not request a ticket more than 14 days ahead. If our Kingsville start slips more than 14 days past the original notice, we ask for a new request. Before we continue work in Kingsville, we have worn or moved marks refreshed through Texas811.

What affects directional boring costs in Kingsville near US 77?

The mapped clay near US 77 can affect drilling time and reaming, while pavement, track or creek crossings add planning and exposure work. Pipe size, bore length, the number of utilities crossed, pits, backfill and excavator time also matter. Mobilization from the Yukon yard is part of the job scope for Kingsville.

Where the Kingsville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kingsville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kingsville, Texas

Type the address of your job in Kingsville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kingsville

All counties: Texas county list.