trinityboringsolutions.com

Lampasas Texas Directional Boring: Brackett Gravelly Clay, Sulphur Creek and BNSF Railway

Quick Answer: The City of Lampasas owns its water system and electric system, so confirm the line owner before a conduit bore near Business 190. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), across Lampasas under streets such as Key Avenue. Lampasas is 359 road miles from our Yukon, Oklahoma main office, and a bore near Sulphur Creek needs a route planned around the channel. Brackett gravelly clay loam covers 30% of the mapped area, and clay can cling to tooling and tighten around pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lampasas bores at a glance

  • County seat of Lampasas County, Texas. Population 7,936 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 359 miles, about 7.2 hours of driving.
  • Ground: Brackett soil is mapped on 30 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 64 percent of the area.
  • Highways inside the boundary: US 281, US 183, US 190, FM 580 and FM 1478. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Sulphur Creek, Cemetery Creek, Burleson Creek and Gibson Branch.
  • Public water: City of Lampasas, surface water bought from another system.
  • Electric: City of Lampasas municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Sulphur Creek in Lampasas?

The City of Lampasas owns the public water system and its municipal electric system, so we confirm which line owner controls a connection before laying out a bore. Lampasas County has 7,936 residents, according to the Census Bureau Vintage 2024 estimate. Along Key Avenue or 4th Street, we can bore water, sewer, gas, electric conduit or fiber without opening the full pavement.

Our main office is in Yukon, Oklahoma, and Lampasas work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. At about 4,100 feet with 48 inch pipe, our longest bore went beneath the Arkansas River in Tulsa. A Lampasas run under Key Avenue is typically a smaller service job. We are a family business started 1965 and have done directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Brackett soil like to bore in Lampasas?

The USDA soil survey maps Brackett soil across 30% of Lampasas, followed by Lampasas soil at 21% and Oakalla soil at 16%. Gravelly clay loam is the leading surface texture, mapped across 37%, while silty clay loam covers 26%. At about 40 inches, the survey maps bedrock across 64% of the area and silty clay loam across 16%; average clay content at that depth is 36%. Around Lampasas, we see no mapped sandy area at that depth, keeping soil expectations grounded for underground work. These mapped patterns guide planning, but the actual bore route can vary.

USDA soil survey, inside the Lampasas city limitsWhat is mapped
Soil series mappedBrackett 30 percent, Lampasas 21 percent, Oakalla 16 percent, Rumley 10 percent and Krum 8 percent
Texture at the surfacegravelly clay loam 37 percent, silty clay loam 26 percent and gravelly clay 21 percent
Texture about 40 inches downbedrock 64 percent, silty clay loam 16 percent and clay loam 9 percent
Engineering class about 40 inches downlean clay (CL) 27 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches64 percent of the area (24 percent hard rock, 40 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel36 percent of the area

The USDA soil survey maps bedrock within 40 inches across 64% of Lampasas, with typical bedrock depth at 15 inches. That shallow rock can slow a bore, and the mapped Travis Peak Formation includes conglomerate, sandstone and limestone. Alluvial sand, silt, clay and gravel is also mapped and dates to the Holocene. No seasonal water table within 60 inches or flood prone soils are mapped. High steel corrosion risk covers 36% of the area, so the line owner should consider materials for steel casing and tracer wire; HDPE is not subject to that soil concern.

How do crews bore Lampasas bedrock and clay?

Lampasas soil maps show both clay and shallow bedrock, so we adjust the tooling and fluid to the route instead of treating every bore like dirt. Sulphur Creek crossings need their own depth and access review.

  1. In Brackett gravelly clay loam, we use a fluid mix and staged reaming suited to sticky ground, then plan to pull the pipe before the open hole tightens.
  2. Where Lampasas soil maps bedrock near the surface, we choose tooling for the rock and advance carefully across the soil to rock contact.
  3. Near the paved streets of Lampasas, we watch fluid returns and keep pressure controlled so the bore does not lift pavement or slabs.
  4. Before a bore near Key Avenue or Sulphur Creek, we hydrovac marked utilities on the path, then track the drill head and log depth and pitch.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where might a Lampasas line go under Business 190?

US 281 has 10.0 mapped roadway miles inside Lampasas, while US 183 has 4.3 and US 190 has 0.7. FM 580 and FM 1478 also run within the city limits. Business 190 is the longest named street in the city at 3.58 miles, followed by 4th Street at 2.76 miles and Key Avenue at 2.31 miles. A bore beside these routes needs a path that accounts for pavement, driveways and marked utilities without assuming the road surface tells us what lies below.

CrossingTypeMapped extentWho has a say
US 281US highway10 roadway miles insideState highway office
US 183US highway4.3 roadway miles insideState highway office
US 190US highway0.7 roadway miles insideState highway office
FM 580State highway4.2 roadway miles insideState highway office
FM 1478State highway2.1 roadway miles insideState highway office
BNSF RailwayRailroad1.57 track miles insideThe railroad
Sulphur CreekStream2.8 channel miles insideChecked for Corps of Engineers jurisdiction
Cemetery CreekStream1.99 channel miles insideChecked for Corps of Engineers jurisdiction
Burleson CreekStream1.78 channel miles insideChecked for Corps of Engineers jurisdiction
Gibson BranchStream1.33 channel miles insideChecked for Corps of Engineers jurisdiction
Gooch BranchStream1.16 channel miles insideChecked for Corps of Engineers jurisdiction
Cooksey CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Little Lucy CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Mc Nett CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.57 track miles inside Lampasas, and the city map shows 5 street and rail crossings. Sulphur Creek runs 2.8 channel miles through the city; the mapped named streams have 29 street crossings in total. Cemetery Creek and Burleson Creek are also inside the limits. Within one mile of Lampasas, we see no mapped lakes or ponds to plan around during underground routing. A creek or rail route changes the bore layout and the approvals to check before work.

Who approves a bore in Lampasas County?

For work within the right of way of US 281, US 183, US 190, FM 580 or FM 1478, the line owner needs a TxDOT utility permit. Lampasas County is in the TxDOT Brownwood District, which reviews the application submitted by the utility owner through RULIS; we prepare the bore plan and profile for that filing. TxDOT requires boring or tunneling beneath existing highway pavement, and rural highway crossings extend under all travel lanes. A BNSF Railway crossing needs an agreement with the railroad that sets crossing conditions. Sulphur Creek is checked during planning for U.S. Army Corps of Engineers jurisdiction. Because Lampasas is incorporated, we coordinate street work with the city that owns its streets.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Lampasas system?

The City of Lampasas public water system uses purchased surface water and reports 3,630 service connections serving 7,291 people. Lampasas also owns its municipal electric system, a local utility detail we consider when planning underground work. Before a conduit bore near 4th Street, we confirm the specific line owner and have marked utilities exposed along the planned route so the drill does not rely on paint alone to show depth.

Line ownerWhat it isSourceSize
City of LampasasPublic water systemSurface water bought from another system3,630 connections, 7,291 people served
City of Lampasas municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration4,655 customers reported
Oncor Electric Delivery Company, Hamilton County Electric Cooperative Association and Pedernales Electric CooperativeElectric utilities reporting service in Lampasas CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Lampasas housing’s median year built at 1969. The survey estimates 36% of homes were built before 1960, 48% from 1960 to 1999 and 16% in 2000 or later. That mix can mean replacement work alongside new connections near Key Avenue. We hydrovac pothole marked lines on the route before drilling close to them, since older services may not match the records or surface markings.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Lampasas, including Kempner?

Lampasas is the county seat of Lampasas County, covers 7.39 square miles and sits at an elevation of 1,029 feet. The city uses ZIP code 76550. Kempner is 12.5 miles east, Lometa is 16.3 miles northwest, and Copperas Cove is 16.3 miles east; Copperas Cove is the nearest larger city. From our Yukon yard, Lampasas is 359 road miles and a 7.2 hour drive. That distance matters when we plan crew mobilization for work near US 281 or Sulphur Creek.

Places near Lampasas

What would we bore near 4th Street in Lampasas?

  • Highway crossing: A bore beneath US 281 needs a route under the travel lanes that accounts for pavement and the utility owner’s TxDOT permit.
  • Street service: A water or sewer connection along 4th Street can pass beneath pavement while pits remain in dirt on each side.
  • Fiber route: A conduit bore near Key Avenue can avoid cutting sidewalks and pavement, with marked utilities exposed before drilling near them.
  • Creek crossing: A route beneath Sulphur Creek needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: Work beneath BNSF Railway needs an agreement with the railroad, with crossing conditions worked into the bore plan.
  • Water connection: A new service near the City of Lampasas system needs the route and connection point confirmed with the water line owner.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near BNSF Railway in Lampasas?

A map pin matters near BNSF Railway or Sulphur Creek because the exact route changes the crossings and access plan. Send the Lampasas address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans showing the proposed route help us review the work before quoting.

From Lampasas, the 359 road miles from Yukon affect mobilization. Brackett gravelly clay and shallow mapped bedrock can change drilling time and tooling. A route under Business 190, near BNSF Railway or across Sulphur Creek adds crossing and exposure planning. Pipe size, bore length, concrete or pavement, pits, excavator time and sand backfill also shape the work. High profile or emergency work can add demands, especially when access and the route need careful coordination.

Questions people ask about boring in Lampasas

Does Trinity take directional boring work in Lampasas County, and how are crews assigned?

Yes. We take directional boring work in Lampasas County and staff it with our own crews or from satellite yards operated by partner drilling contractors we have vetted. Trinity remains the contact from the first call through the bore log. A job near Key Avenue is planned around its route and marked utilities.

Who owns electric lines in Lampasas County, and who confirms conduit specifications?

The City of Lampasas owns its municipal electric system. Before a conduit bore near Business 190, we confirm the line owner for the specific location and check the conduit requirements with that owner. The city system’s reported customer count does not identify which line serves every address.

Does the city or county control Lampasas streets such as Key Avenue, and can a bore avoid cutting them?

Lampasas is an incorporated city, so its city streets, including Key Avenue, belong to the city. Directional boring can place a line beneath pavement without cutting across the street surface. The route still needs utility exposure and any applicable approvals before drilling starts.

What does Lampasas housing near 4th Street tell us about replacement bores?

The American Community Survey 2019 to 2023 estimates put the median year built for Lampasas housing at 1969, with 36% built before 1960. That age mix can mean a replacement service near 4th Street follows older buried lines. We expose marked utilities on the planned route before drilling near them.

Does Brackett soil in Lampasas create a steel corrosion concern, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 36% of Lampasas, and Brackett soil is the largest mapped series. The line owner chooses materials and any coating for steel casing or tracer wire. HDPE does not have the same soil corrosion concern, but pipe selection depends on the line requirements.

What ground might a bore encounter in Lampasas Brackett soil?

The USDA soil survey maps Brackett soil across 30% of Lampasas, with gravelly clay loam as the leading surface texture. At about 40 inches, bedrock is mapped across 64% of the area and the average clay content is 36%. Those are survey patterns, so a specific route near Sulphur Creek may differ.

Can I reach Trinity after hours about an urgent bore near Key Avenue in Lampasas?

Yes. For Lampasas questions, we answer Trinity’s phone 24 hours a day at (405) 409-7423. For urgent work near Key Avenue, share the location and what line needs to go in so we can understand the route and response needed. Trinity also provides 24 hour emergency response.

How much notice does Texas811 need for a Lampasas bore near Business 190, and what if marks move?

For a bore near Business 190, request a Texas811 locate at least two working days before excavation, excluding Saturdays, Sundays and legal holidays. Do not request it more than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore near US 281 in Lampasas?

The price depends on the route and work scope near US 281. Bore length and pipe size matter, as do Brackett clay, shallow mapped bedrock, pavement, utility crossings and any creek or drainage route. Pits, excavator time, sand backfill, emergency requirements and mobilization from Yukon also affect the job.

Where the Lampasas facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lampasas

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lampasas, Texas

Type the address of your job in Lampasas. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lampasas

All counties: Texas county list.