trinityboringsolutions.com

Sanford Texas Directional Boring: Dallam Soil, RM 1319 and Antelope Creek

Quick Answer: Can we get your line beneath RM 1319 without opening the pavement? We do directional boring, also called horizontal directional drilling (HDD), in Sanford and across Texas, including bores under RM 1319. Sanford is 242 road miles from our Yukon, Oklahoma main office, so a bore near Fritch needs a mobilization plan. Dallam soil is mapped across most of town, and sandy clay loam below the surface calls for staged reaming to keep the hole steady. We can plan around a street, highway or nearby Antelope Creek.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sanford bores at a glance

  • Incorporated city in Hutchinson County, Texas. Population 130 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 242 miles, about 5 hours of driving.
  • Ground: Dallam soil is mapped on 76 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: RM 1319 and RM 687. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Sanford Municipal Water System, groundwater bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Sanford and Hutchinson County?

Can we get a line under RM 1319 without cutting the pavement? We take directional boring work in Sanford, an incorporated town in Hutchinson County with a Census Bureau Vintage 2024 estimate of 130 residents. A water service can follow a route near the Sanford Municipal Water System, while sewer, gas, electric conduit and fiber lines can run beneath Main Street or another street where the route and access work.

Our main office is in Yukon, Oklahoma, and Sanford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet under the Arkansas River in Tulsa, so a typical Sanford crossing beneath Main Street is a shorter job by comparison. Our family business began in 1965, and we have provided directional boring since 1982, 242 road miles from our Yukon main office.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Dallam soil survey show in Sanford?

The USDA soil survey maps Dallam soil across 76 percent of Sanford, mostly as Dallam Urban land complex with 0 to 3 percent slopes. Ady fine sandy loam covers 18 percent, and Burson stony loam covers 3 percent. We treat mapped Dallam, Ady, and Burson patterns as indicators, not test borings, when planning underground work in Sanford. Fine sandy loam is the surface texture across 96 percent of the mapped area. At about 40 inches below the surface, sandy clay loam is mapped under 94 percent, with an average clay content of 27 percent and sandy material under 3 percent.

USDA soil survey, inside the Sanford city limitsWhat is mapped
Soil series mappedDallam 76 percent, Ady 18 percent and Burson 3 percent
Texture at the surfacefine sandy loam 96 percent and stony loam 3 percent
Texture about 40 inches downsandy clay loam 94 percent and bedrock 3 percent
Engineering class about 40 inches downlean clay (CL) 94 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

At about 40 inches, the mapped sandy clay loam is classified CL, so a bore near Main Street may hold an open hole but can get sticky on the reamer. The USDA soil survey maps bedrock within 60 inches under 3 percent of Sanford, with typical bedrock depth listed as 6 inches; the mapped bedrock is weathered. Seasonal water table, flood prone soils and high steel corrosion risk are not mapped. The Permian Quartermaster Formation and Whitehorse Group, undivided, includes shale, siltstone, sandstone, gypsum and dolomite, so rock contact can slow drilling or affect steering.

How do crews bore Sanford’s sandy clay loam?

Sanford soil maps point to fine sandy loam at the surface and CL sandy clay loam at about 40 inches. Near RM 1319, we match the fluid and reaming plan to the ground we encounter.

  1. We check the mapped Dallam soil and the route on RM 1319 before choosing a fluid plan; clay at depth can cling to the reamer.
  2. With sandy clay loam mapped under most of Sanford, we ream in stages and have the pipe ready before the final pass.
  3. The soil survey maps weathered bedrock in a small part of town, so we watch steering as a bore approaches a rock contact.
  4. For a line near Main Street, we hydrovac pothole each marked utility on the path before the drill approaches it.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What might a Sanford bore cross near Antelope Creek?

RM 1319 and RM 687 are the state highways mapped inside Sanford, with 0.6 roadway miles of RM 1319 and 0.2 of RM 687 inside town limits. Main Street is the longest named street at 0.61 miles, followed by Davis Street at 0.52 and Hoggatt Street at 0.48. Sanford has 4.86 public road centerline miles across 15 named streets. The route determines whether the bore stays under a street or needs to reach a highway right of way.

CrossingTypeMapped extentWho has a say
RM 1319State highway0.6 roadway miles insideState highway office
RM 687State highway0.2 roadway miles insideState highway office
Antelope CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Canadian RiverStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Lake MeredithLake or pond4,358 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Sanford or within 1 mile outside town, and no street and rail crossings are mapped. Antelope Creek and the Canadian River are each 0.6 miles from the limits, not inside town; no street crossing of a named stream is mapped inside Sanford. Lake Meredith is mapped within 1 mile, outside town. If a planned route reaches Antelope Creek or Lake Meredith, we check for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Sanford bore under RM 1319?

RM 1319 and RM 687 are state highways, so a bore in either highway right of way needs a TxDOT utility permit reviewed by the TxDOT Amarillo District. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for the utility owner and work under its permit. Under an existing highway, TxDOT rules call for boring or tunneling, with cover requirements depending on the line type and route. Sanford’s streets, including Main Street, belong to the incorporated town. Antelope Creek is outside town limits, and a water crossing there is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Sanford Municipal Water System routes?

Sanford Municipal Water System is owned by local government and uses purchased groundwater. Public records list 68 service connections serving 120 people, so a proposed water line near Main Street should be planned against the existing system route. Southwestern Public Service, North Plains Electric Cooperative and Rita Blanca Electric Cooperative report electric service in Hutchinson County. For electric conduit bores crossing RM 1319, we confirm the line owner for the specific address before planning.

Line ownerWhat it isSourceSize
Sanford Municipal Water SystemPublic water systemGroundwater bought from another system68 connections, 120 people served
Southwestern Public Service, North Plains Electric Cooperative and Rita Blanca Electric CooperativeElectric utilities reporting service in Hutchinson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Sanford’s median housing year at 1968; we use fine sandy loam information only as context, not a utility map. The estimates show 35 percent of homes built before 1960 and 65 percent from 1960 to 1999, with none built in 2000 or later. That age profile makes replacement work as relevant as new services along Hoggatt Street. We hydrovac pothole every marked utility on the bore path before drilling near it; a proposed line under Hoggatt Street is one place to expose crossings first.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Sanford from Fritch and our Yukon yard?

Sanford is in Hutchinson County, at an elevation of 3,029 feet, and covers 0.13 square miles. ZIP code 79078 serves the town. Lake Meredith Estates is 4.8 miles southwest, Fritch is 5.5 miles southwest, and Borger is 7.9 miles east. Borger is the nearest larger city; the county seat, Stinnett, is 9.7 miles northeast. Sanford is 242 road miles and a 5.0 hour drive from our Yukon, Oklahoma main office, a distance that matters when planning equipment and crew mobilization for RM 1319 or a local street.

Places near Sanford

What would we bore beneath Davis Street in Sanford?

  • Highway crossing: A bore beneath RM 1319 stays below the highway pavement, with the utility owner arranging the TxDOT permit.
  • Water service: A connection near the Sanford Municipal Water System can be routed beneath a street without opening the whole roadway.
  • Fiber drop: A fiber conduit route beneath Main Street can avoid cutting the paved street when the pits fit the site.
  • Creek crossing: A route toward Antelope Creek needs a planned path and a check for Corps jurisdiction during planning.
  • Street crossing: A water or sewer line beneath Davis Street needs marked utilities exposed before drilling near the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Sanford bore near Main Street?

For a bore along Main Street, send the address or map pin, what is going in the ground, the pipe or conduit size, the footage, and any sketch or plans. Those details show whether the route stays on a town street or reaches RM 1319, and whether we need to plan around marked lines or access for the bore pits.

Price follows the job details. Ground conditions matter: Dallam soil is common, while sandy clay loam is mapped below the surface. Crossings matter too, including pavement on Main Street, a route into RM 1319 right of way, or work near Antelope Creek. Logistics include pit locations, concrete or pavement, exposed utilities, equipment time and the 242 road miles from Yukon. Pipe size, bore length and emergency timing also change the scope.

Questions people ask about boring in Sanford

Does Trinity Boring Solutions take directional boring work in Sanford and Hutchinson County?

Yes. We take directional boring work in Sanford and across Texas, with our own crews and partner contractor crews from vetted satellite yards. For planned work near Main Street, we stay your contact from first call through bore log, regardless of which crew is on site. That applies to a line routed under RM 1319 or a Sanford street.

Who approves a bore under RM 1319 in Sanford?

The utility owner needs a TxDOT utility permit for work in RM 1319 right of way. That owner files the application through RULIS, and the TxDOT Amarillo District reviews it. We prepare the bore plan and profile for the owner and work under its permit. A bore under RM 1319 pavement is installed by boring or tunneling under TxDOT rules.

Can a line be bored under Antelope Creek near Sanford?

A bore can be planned for a route beneath Antelope Creek, which is mapped 0.6 miles from Sanford’s limits. During planning, we check whether the water crossing falls under U.S. Army Corps of Engineers jurisdiction. The route, ground and access determine the bore plan; no street crossing of a named stream is mapped inside Sanford.

In Hutchinson County, who operates Sanford’s public water system, and where does its water come from for our bore planning?

Local government owns Sanford Municipal Water System, which uses purchased groundwater. Public records list 68 service connections and 120 people served in Sanford; near Main Street, we verify utilities before boring. If your proposed water line ties into a route near Main Street, the system’s existing lines need to be located and exposed before the drill gets close.

Which electric line owner should I check in Sanford and Hutchinson County?

Southwestern Public Service, North Plains Electric Cooperative and Rita Blanca Electric Cooperative report electric service in Hutchinson County. Those records do not identify the provider at every Sanford address. Confirm the owner for the job location before a conduit bore, including a proposed route near Davis Street.

Do Sanford streets such as Hoggatt Street have to be cut for a new line?

Sanford is incorporated, so its public streets belong to the town. A directional bore can place a line under Hoggatt Street without cutting across the street when the route and pit locations allow it. We expose marked utilities on the bore path before drilling near them, since surface marks do not show their depth.

Can I reach Trinity after hours about an urgent bore near Hoggatt Street in Sanford?

Yes. We answer Sanford calls 24 hours a day at (405) 409-7423, including questions about boring near Borger. For an urgent job near Hoggatt Street, call with the location, line type and any known access or crossing issue. We also provide 24 hour emergency response, with the work plan shaped by the Sanford site.

How early should I call Texas811 for a bore near Main Street in Sanford?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a Main Street start slips more than 14 days past the original notice, make a new request. Before we continue work near RM 687, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore near RM 1319 in Sanford?

The job details set the price, including bore length and pipe size, Dallam soil conditions, pavement, exposed utilities, pit work and mobilization. A route near RM 1319 may involve highway right of way and a TxDOT permit. A creek crossing or emergency timing can also change the work plan, as can the 242 road miles from Yukon.

Where the Sanford facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sanford

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sanford, Texas

Type the address of your job in Sanford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sanford

All counties: Texas county list.