Smiley Texas Directional Boring: Griter Soil, US 87 and Elm Creek
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Smiley along routes near US 87. At 482 road miles from Yukon, we coordinate crews for projects near Finch Street. Griter soil has clay at depth, which can grip pipe and needs a controlled drilling fluid plan. Elm Creek is outside the city limits, so a nearby route needs its own crossing review.
Smiley bores at a glance
- Incorporated city in Gonzales County, Texas. Population 490 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 482 miles, about 9.2 hours of driving.
- Ground: Griter soil is mapped on 82 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 9 percent of the area.
- Highways inside the boundary: US 87 and FM 108. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Smiley, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Smiley and Elm Creek?
At 482 road miles from our Yukon yard, we staff Smiley work with our own crews or crews from vetted partner drilling contractors, with Trinity coordinating the job. The Census Bureau Vintage 2024 estimate puts Smiley at 490 people in Gonzales County. We install water, sewer, gas, electric conduit and fiber along routes such as Steele Street and US 87, with the bore planned for the line and site.
Our main office is in Yukon, Oklahoma, and Smiley work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Along a route such as US 87, our family business history goes back to 1965, directional boring to 1982, and our record has no utility strike in over 25 years. That record matters where new work meets lines already serving Smiley.

What does the Griter soil survey show beneath Smiley?
The USDA soil survey maps Griter soil across 82% of Smiley. Griter fine sandy loam on 1 to 3 percent slopes covers 70%, with another 12% mapped as eroded Griter fine sandy loam. Surface texture is fine sandy loam across 82% of the city; loamy fine sand covers 10%, and fine sand 8%. At about 40 inches below the surface, the survey maps sandy clay loam in 88% of the area and clay in 12%. Average clay content at that depth is 36%, and heavy clay is mapped across 82%. Griter soil patterns help frame our planning, but they are mapped soils, not test borings.
| USDA soil survey, inside the Smiley city limits | What is mapped |
|---|---|
| Soil series mapped | Griter 82 percent, Rutersville 9 percent and Nusil 8 percent |
| Texture at the surface | fine sandy loam 82 percent, loamy fine sand 10 percent and fine sand 8 percent |
| Texture about 40 inches down | sandy clay loam 88 percent and clay 12 percent |
| Engineering class about 40 inches down | lean clay (CL) 91 percent and clayey sand (SC) 8 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | 9 percent of the area (0 percent hard rock, 9 percent weathered rock) |
| Seasonal water table within 60 inches | 9 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 91 percent of the area |
The soil survey maps weathered bedrock within five feet in 9% of Smiley, while hard bedrock is not mapped within that depth. Seasonal water tables are mapped within 60 inches in 9%, so some Steele Street work may need pit and water planning. Flood prone soils are not mapped near FM 108, so we verify conditions before setting a bore path. High steel corrosion risk covers 91%, which matters for steel casing and tracer wire; the line owner selects any protection. The geologic map names the Yegua Formation, Bartonian age, with claystone, sandstone and limestone. Material can change along a route, so the bore plan should account for the mapped variation.
How do we bore through sandy clay loam in Smiley?
Smiley’s mapped sandy clay loam sits over clay in much of the survey area. That mix can hold an open hole but become sticky around the reamer, so we plan the fluid and pullback around the ground along each route.
- Because Griter soil is fine sandy loam at the surface and clay at depth, we use a fluid plan that limits sticky buildup around the reamer.
- With 36% average clay content at about 40 inches, we ream in stages and plan to pull the pipe the same day the hole opens.
- Where a bore near US 87 passes beneath pavement, we keep fluid pressure controlled so returns do not lift the surface.
- The survey maps loamy fine sand and fine sand in Smiley too, so we keep the pipe ready before the final ream in loose areas.

Which streets and highways shape bores in Smiley near Steele?
US 87 runs 0.6 roadway miles inside Smiley, and FM 108 runs 0.9 miles. A line beneath either highway needs a route and depth plan that fits the right of way. Steele is the longest named street at 0.56 miles, followed by Finch at 0.55 miles and Wheat at 0.54 miles. Anglin runs 0.53 miles. These street lengths help describe the local route, but the actual bore length depends on the start, endpoint and obstacles.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 87 | US highway | 0.6 roadway miles inside | State highway office |
| FM 108 | State highway | 0.9 roadway miles inside | State highway office |
| Elm Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Sandies Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Little Elm Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Long Hollow | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Smiley or within one mile outside the limits, so there is no mapped track route to plan around. Elm Creek is 0.4 miles from the city limits, Sandies Creek 0.5 miles, and Little Elm Creek 0.6 miles. No named stream is mapped inside the limits, and no street crossing of a named stream is mapped there. A route near one of those creeks still needs a site specific crossing review. No lakes or ponds are mapped within one mile near Elm Creek, but we still plan around mapped waterways.
Who approves bore work in Smiley in Gonzales County?
Smiley is incorporated, so its city streets, including Steele and Finch, belong to the city. Work in the right of way of US 87 or FM 108 needs a TxDOT utility permit. The utility owner files through TxDOT’s online RULIS system, and the TxDOT Yoakum District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. For highway crossings, the plan must account for the required cover and boring or tunneling beneath existing pavement. Elm Creek and other water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are near the City of Smiley water system?
The City of Smiley public water system uses groundwater wells and reports 242 service connections serving 458 people. That network is one reason to locate and expose existing lines before a new bore follows a street. Electric service reported in Gonzales County includes AEP Texas Central, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and Guadalupe Valley Electric Cooperative. We identify the electric line owner for the specific route before planning a conduit bore, rather than assuming one provider serves every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Smiley | Public water system | Groundwater wells | 242 connections, 458 people served |
| AEP Texas Central, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and Guadalupe Valley Electric Cooperative | Electric utilities reporting service in Gonzales County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Smiley’s median housing year at 1972; around West Lee, we account for underground work near existing homes. The survey estimates 35% of homes were built before 1960, 54% from 1960 to 1999 and 11% in 2000 or later. Replacement work near Finch may meet older lines, while a new service has a different route and connection point. For a bore path near Steele, we hydrovac pothole each marked utility before drilling nearby. For example, a marked line beneath Anglin is exposed first because surface paint shows position, not depth.

Do we cover Smiley and nearby Stockdale?
Smiley is an incorporated city in Gonzales County, with 0.52 square miles of land and an elevation of 312 feet. ZIP code 78159 covers the city. Nixon is 7.7 miles west, Stockdale is 19.8 miles west, and Gonzales is 20.2 miles northeast. Gonzales is both the nearest larger city and the county seat. From our Yukon, Oklahoma yard, Smiley is 482 road miles away and about a 9.2 hour drive. That distance can affect mobilization for a bore along US 87 or a local street.
Places near Smiley
- Directional boring in Nixon: 7.7 miles west
- Directional boring in Stockdale: 19.8 miles west
- Directional boring in Gonzales: 20.2 miles northeast
- Directional boring in Yorktown: 21.5 miles south
- Directional boring in Nordheim: 24.1 miles south
What bore projects fit Finch Street and Smiley?
- Highway crossing: A water or conduit bore beneath US 87 needs a profile that accounts for the highway right of way and pavement.
- Street service: A new connection along Finch can use a bore to pass under the street without opening the full roadway.
- Water replacement: A route near the City of Smiley system needs existing water lines located and exposed before drilling near them.
- Fiber route: Conduit along Steele can be planned around the street and any marked utilities on the proposed bore path.
- Creek crossing: A route toward Elm Creek needs a crossing review because the named creek lies 0.4 miles from Smiley’s limits.
- Electric conduit: Work near FM 108 starts with identifying the line owner and planning for the state highway right of way.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send to price a Smiley bore near Anglin?
For an Anglin Street quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route, access and nearby crossings. If the route continues toward US 87 or a creek, show that on the plan so we can review the full scope.
A short, clear route on Finch with no pavement or creek crossing would be simpler to plan than a route with several exposed utilities. Length, pipe size, Griter soil and the number of crossings all affect the work. Concrete or pavement on US 87 changes the crossing plan, while Elm Creek adds a water crossing review if the route reaches it. Pits, excavator time, sand backfill, high profile or emergency work, and mobilization from Yukon also shape the quote.
Questions people ask about boring in Smiley
Does Trinity Boring Solutions take jobs in Smiley, Gonzales County, and how are crews assigned?
Yes. We take directional boring work in Smiley and coordinate it from our Yukon office. Our own crews or crews from partner drilling contractors we have vetted may handle the site work. Trinity remains your contact from the first call through the bore log, whether the route is near Steele Street or US 87.
How do older homes and buried lines near Finch affect replacement bores in Smiley?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1972, with 35% of homes built before 1960. A replacement route near Finch may encounter older buried services, so we locate and expose marked lines before drilling close to them. The age of a house does not confirm what is underground at that address.
Does Griter soil in Smiley pose a corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 91% of Smiley, including areas with Griter soil. The line owner should consider that when selecting steel casing or tracer wire protection. HDPE does not have the same soil corrosion concern. The material choice depends on the line and the owner’s requirements.
What ground does a bore pass through in Smiley’s Griter soil?
The USDA soil survey maps Griter fine sandy loam across much of Smiley, with sandy clay loam in 88% of the area at about 40 inches deep. Clay is mapped at that depth in 12%. Clay can be sticky and grip pipe, so we plan staged reaming and fluid use for the specific route.
Is bedrock mapped within five feet of the surface in Smiley?
Weathered bedrock is mapped within five feet in 9% of Smiley, while hard bedrock is not mapped within that depth. That does not establish conditions at a particular Finch Street bore. The Yegua Formation map includes claystone, sandstone and limestone, so the ground can vary along a route.
For a bore under US 87 in Smiley, does TxDOT Yoakum District approve the state highway permit?
A bore in the US 87 right of way needs a TxDOT utility permit. The utility owner files the application in RULIS, and the TxDOT Yoakum District reviews it. We prepare the bore plan and profile for that application. Highway cover and pavement requirements shape the crossing plan.
How much notice does Texas811 need for a bore along Steele in Smiley?
The locate request for a Steele Street bore must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. When planning a bore path near West Fay, we allow for the Texas811 notice period of at least two working days. If the start moves more than 14 days beyond the original notice, request a new ticket; refresh worn or moved marks before work continues.
How far is Smiley from Trinity’s Yukon office, and does Gonzales affect the job?
Smiley is a 9.2 hour drive from our Yukon, Oklahoma yard, and Gonzales is 20.2 miles northeast. The distance from Yukon can affect mobilization, while the actual route, access and crossings near Gonzales County set the site scope. We coordinate the work from the first call through the bore log.
When we price a bore under US 87 in Smiley, how do crossing length, utility locations, and TxDOT Yoakum District requirements affect cost?
The job scope determines the quote, not the highway name alone. Length, pipe size, Griter soil, utilities that must be exposed, pavement, pits and creek crossings all matter. A US 87 right of way crossing also brings permit planning into the scope. Mobilization from Yukon is another job factor.
Where the Smiley facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Smiley
- U.S. Census Bureau, TIGER/Line 2024: Smiley boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Smiley
- U.S. Census Bureau, American Community Survey 2019 to 2023: Smiley housing units and year built
- Macrostrat geologic map compilation: map units under Smiley
- U.S. EPA Safe Drinking Water Information System: public water systems serving Smiley
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Gonzales County
- U.S. Geological Survey, Elevation Point Query Service: Smiley elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Smiley
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Smiley
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Smiley, Texas
Type the address of your job in Smiley. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Smiley
Same county: Waelder. All counties: Texas county list.
