Waller Texas Directional Boring: Wockley Soil, US 290 and Mound Creek
Quick Answer: Along US 290 and the streets feeding it, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Waller, Texas projects. Waller is 437 road miles from our Yukon, Oklahoma main office, and Mound Creek crossings call for careful route planning. USDA soil maps show Wockley soil across much of Waller, with sandy clay loam common at about 40 inches. That clay rich layer can hold a bore hole and build up on the reamer, so we plan the fluid and reaming for the ground.
Waller bores at a glance
- Incorporated city in Waller County and Harris County, Texas. Population 4,138 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 437 miles, about 8.5 hours of driving.
- Ground: Wockley soil is mapped on 62 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 290, US 290 Business, Texas State Highway 6, FM 362 and FM 2920. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: Union Pacific, with 5 mapped street and rail crossings.
- Named streams inside the boundary: Mound Creek.
- Public water: City of Waller, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring in Waller County?
Trinity Boring Solutions handles directional boring in Waller, which spans Waller County and Harris County, for water, sewer, gas, electric conduit and fiber routes along streets such as Fields Store Road. The Census Bureau Vintage 2024 estimate puts Waller at 4,138 people. From our Yukon yard, Waller is 437 road miles away, and Trinity stays responsible from the first call through the bore log regardless of which vetted crew is on site.
Our main office is in Yukon, Oklahoma, and Waller work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965, with directional boring work dating to 1982. With the City of Waller water system and buried lines along local roads in mind, we bring a record of no utility strike in over 25 years to each locate and bore plan.

What does Wockley soil mean for a bore in Waller?
Waller’s mapped ground is dominated by Wockley soil, which the USDA soil survey shows across 62 percent of the city. The mapped Wockley urban land complex covers 33 percent, and Wockley fine sandy loam covers 25 percent. Fine sandy loam makes up 74 percent of mapped surface texture, but about 40 inches down, sandy clay loam is mapped across 84 percent of the area. Average clay content at that depth is 29 percent. The deeper mapped texture is not sandy, so a bore plan should account for cohesive ground rather than assume an open hole will cut and clear easily. For Waller, we treat these mapped patterns as planning context, not test borings.
| USDA soil survey, inside the Waller city limits | What is mapped |
|---|---|
| Soil series mapped | Wockley 62 percent, Hockley 14 percent, Tomball 7 percent, Mockley 6 percent and Snakecreek 6 percent |
| Texture at the surface | fine sandy loam 74 percent, loamy fine sand 17 percent and loam 7 percent |
| Texture about 40 inches down | sandy clay loam 84 percent, clay loam 7 percent and sandy clay 6 percent |
| Engineering class about 40 inches down | lean clay (CL) 95 percent and clayey sand (SC) 3 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 91 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 97 percent of the area |
In Waller, bedrock does not appear on the map in the upper five feet, which does not establish conditions at greater depth. A seasonal water table is mapped within 60 inches across 91 percent of the area and within 40 inches across 77 percent, so pits may need pumping and a compact work area. Flood prone soils cover 6 percent, while high steel corrosion risk covers 97 percent; the line owner can weigh casing and tracer wire materials, while HDPE avoids that steel concern. The Pleistocene Alluvial silt and clay unit and Pliocene Willis Formation both include fine grained materials, so changing ground along the route can affect steering and reaming.
How do crews bore Waller’s sandy clay loam?
For Waller’s sandy clay loam, we manage fluid and reaming to keep the hole workable without pushing pressure toward pavement on Fields Store Road or other planned crossings.
- Wockley soil at about 40 inches is commonly sandy clay loam, so we use controlled fluid and staged reaming to reduce sticky buildup on the reamer.
- With a seasonal water table mapped across much of Waller, we keep pits compact and pump them as needed to manage water during the bore.
- Before approaching marked lines along Stokes Road or Fields Store Road, we hydrovac expose each one because surface paint does not show its depth.
- At Mound Creek or a Waller street crossing, a walkover locator tracks the drill head as we log its depth and pitch through each rod.

What is in the way of a new line on Fields Store Road in Waller?
Waller’s mapped highways include US 290, US 290 Business, Texas State Highway 6, FM 362 and FM 2920. US 290 and Texas State Highway 6 each have 5.4 mapped roadway miles inside the city limits. Fields Store Road is the longest named street at 2.72 miles, followed by Waller Tomball Road at 1.8 miles and Stokes Road at 1.62 miles. That mix of highway and neighborhood routes can put a bore near different pavement and utility corridors, so the path and access points need to be planned for the actual street or highway.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 290 | US highway | 5.4 roadway miles inside | State highway office |
| US 290 Business | US highway | 1.8 roadway miles inside | State highway office |
| Texas State Highway 6 | State highway | 5.4 roadway miles inside | State highway office |
| FM 362 | State highway | 2.4 roadway miles inside | State highway office |
| FM 2920 | State highway | 2.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.13 track miles inside | The railroad |
| Mound Creek | Stream | 3.14 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Kickapoo Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Little Mound Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
The Union Pacific Eureka Subdivision runs 1.13 track miles through Waller, and public mapping shows 5 street and rail crossings inside the city. A crossing of Union Pacific track needs an agreement from the railroad that owns it, with conditions such as casing, depth and flagging set for that location. Mound Creek runs 3.14 channel miles through the city, and 11 mapped street crossings intersect named streams. The mapped streams also include nearby Kickapoo Creek and Little Mound Creek. In Waller, we account for the mapped absence of lakes or ponds within one mile when planning boring routes.
Do I need a permit to bore under US 290 in Waller?
A bore in US 290 right of way needs a TxDOT utility permit, and Waller is reviewed by the TxDOT Houston District. For an electric or communication line crossing, the mapped cover requirement is at least 60 inches below the lowest crossed grade; along the right of way it is 48 inches. Water lines need 60 inches at crossings and 36 inches alongside, while pressurized sewer crossings need 60 inches. The line owner submits the application through TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. Highway pavement is bored or tunneled beneath, not open trenched without written district approval.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Waller in Waller?
The City of Waller public water system draws from groundwater wells and reports 1,816 service connections serving 5,448 people. For electric service in Waller County, CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report service to EIA. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore along a Waller street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Waller | Public water system | Groundwater wells | 1,816 connections, 5,448 people served |
| CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative | Electric utilities reporting service in Waller County and Harris County | EIA Form 861 | Confirm the line owner by address |
We use Waller’s American Community Survey 2019 to 2023 five year estimate of a 1987 median housing year as context, not a proxy for underground conditions. We use Waller’s survey estimates as housing context for underground work: 11 percent before 1960, 57 percent from 1960 to 1999 and 32 percent in 2000 or later. A replacement route near Waller Tomball Road may meet older buried services, while newer construction may call for a new service connection. Before drilling near any marked utility, we hydrovac expose it; paint shows position, not depth, which matters around older lines.

Where is Waller in relation to Prairie View?
Waller is an incorporated city in Waller County and Harris County, with an elevation of 268 feet and a land area of 6.12 square miles. We use Waller ZIP codes 77484 and 77445 to identify the project location, while checking underground conditions separately. Prairie View is 2.8 miles west, Pine Island is 5.9 miles west and Hempstead is 9.0 miles west; Hempstead is the county seat, while Prairie View is the nearest larger city. From our Yukon, Oklahoma yard, the road trip is 437 miles and takes 8.5 hours, so mobilization is part of planning a Waller job.
Places near Waller
- Directional boring in Prairie View: 2.8 miles west
- Directional boring in Pine Island: 5.9 miles west
- Directional boring in Hempstead: 9 miles west
- Directional boring in Todd Mission: 14.4 miles northeast
- Directional boring in Stagecoach: 14.6 miles east
What would we bore along Waller Tomball Road in Waller?
- Highway crossing: A route under US 290 is bored beneath existing pavement, with the line owner’s permit and required cover worked into the plan.
- Water service: A new connection near the City of Waller system needs a route checked against marked utilities before the drill approaches them.
- Fiber drop: A fiber route along Fields Store Road can pass below pavement and driveways, with potholes locating marked lines first.
- Creek crossing: A planned bore beneath Mound Creek can leave the channel banks uncut, with jurisdiction checked during planning.
- Rail crossing: A route beneath the Union Pacific Eureka Subdivision needs the railroad’s crossing agreement and its requirements for the track location.
- Street replacement: A replacement line near Waller Tomball Road can use a bore to avoid opening pavement along the route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Waller bore near Union Pacific?
For a Waller quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Fields Store Road or US 290 also tells us which pavement, marked utilities and access points belong in the estimate. Those details let us look at the crossing rather than judge the job from footage alone.
The biggest variables around Waller are the ground and the crossings on the proposed route. Sandy clay loam and a shallow seasonal water table affect reaming, fluid handling and pit work. A route under US 290 or near Union Pacific can add permit, casing and crossing coordination. Price also reflects pipe size, bore length, utilities to expose, pavement or concrete, creek or drainage crossings, sand backfill, excavator time and mobilization from Yukon. Emergency or high profile work can change the planning needs.
Questions people ask about boring in Waller
Does Trinity take directional boring jobs in Waller County, and who staffs them?
Yes, Trinity takes directional boring work in Waller County and across Texas. Our Yukon main office manages the job, and work may be handled by our crews or by vetted drilling partners working from satellite yards. Customers deal with Trinity from the first call through the bore log, whether the crew is on Fields Store Road or another Waller route.
Can a line be bored under Mound Creek in Waller?
A bore can be planned beneath Mound Creek so the channel is not cut open. The creek runs 3.14 channel miles through Waller, so the route, entry and exit pits need to fit the site. During planning, we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
Who runs Waller’s public water system, and does it use groundwater wells?
For Waller utility crossings, we account for the City of Waller’s groundwater wells as the public water source. We treat Waller’s 1,816 service connections and 5,448 people served as system scale, while verifying underground conditions separately. For a proposed water bore near the system, the existing lines still need to be located and exposed along the route before drilling close to them.
Which electric company serves Waller County, and who confirms conduit details?
CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report electric service in Waller County. The provider can vary by address, so we confirm the owner of the line before planning a conduit bore near a Waller street. The line owner can confirm the conduit specifications for its system.
Who controls Stokes Road in Waller, and does a new line require a street cut?
Waller is an incorporated city, so its city streets, including Stokes Road, belong to the city itself. A directional bore can pass beneath pavement without opening a trench through the street, subject to the route and site conditions. We expose marked utilities along the planned path before drilling near them.
What do Waller’s housing ages near Waller Tomball Road mean for replacement bores?
Waller housing ranges across several eras: the median year built is 1987, and 11 percent of homes date from before 1960. A replacement bore near Waller Tomball Road may have to cross older buried services as well as newer connections. We expose marked lines before drilling close to them instead of treating paint as a depth reading.
How long is the trip from Yukon to Waller near Prairie View, and does it affect the job?
The drive from Yukon to Waller takes 8.5 hours, and Prairie View is 2.8 miles west of Waller. That travel distance can affect mobilization planning for a bore, along with the route, ground and crossings. Our Yukon office stays involved through the bore log regardless of which vetted crew is on site.
How early should I call Texas811 for a Waller bore on Fields Store Road?
For a planned bore along Fields Store Road, the Texas811 locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Waller work, if our start slips more than 14 days past the original notice, we make a new request. On Waller jobs, we refresh worn or moved marks through Texas811 before continuing boring work.
What affects the cost of a directional bore near US 290 in Waller?
The route and scope determine the price for a Waller bore near US 290. Sandy clay loam, bore length, pipe size and the utilities to expose all affect the work. Pavement, drainage or Mound Creek crossings, pits, excavator time, backfill and mobilization from Yukon can also change the plan. No single route detail sets the price by itself.
Where the Waller facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Waller
- U.S. Census Bureau, TIGER/Line 2024: Waller boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Waller
- U.S. Census Bureau, American Community Survey 2019 to 2023: Waller housing units and year built
- Macrostrat geologic map compilation: map units under Waller
- U.S. EPA Safe Drinking Water Information System: public water systems serving Waller
- U.S. Department of Transportation, North American Rail Network: track owners in Waller County and Harris County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Waller County and Harris County
- U.S. Geological Survey, Elevation Point Query Service: Waller elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Waller
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Waller
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Waller, Texas
Type the address of your job in Waller. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Waller
Same county: Katy · Brookshire · Pattison. All counties: Texas county list.
