Directional Boring Contractors in Crane County, TX
Trinity Boring Solutions is a directional boring contractor serving Crane County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Crane. The Trinity main office in Yukon, Oklahoma is about 481 road miles from Crane, the county seat. The usual crossings in Crane County are Interstate 20 and US 385, the Pecos River and Union Pacific track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Crane County, Texas
Type the address of your job in Crane County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Crane County?
Crane County covers 785 square miles, has about 4,594 residents and sits in the TxDOT Odessa District.
| County seat | Crane |
|---|---|
| Population | 4,594 (2024 Census estimate), down 1.8% since 2020 |
| Land area | 785 square miles |
| Largest cities and towns | Crane (3,375) |
| TxDOT district | TxDOT Odessa District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | AEP Texas North and Oncor Electric Delivery Company |
| Interstate and US highways | Interstate 20 and US 385 |
| State Highways | 329 |
| Rivers | Pecos River |
| Railroads | Union Pacific and short line railroads, about 5 main line miles |
| Average precipitation | 13.2 inches a year (1991 to 2020) |
| New housing units permitted | 4 in 2025 |
| Road distance from Trinity main office | About 481 miles from Yukon, Oklahoma to Crane |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Crane County?
A bore in Crane County most often has to cross a highway such as Interstate 20, US 385 or State Highway 329, the Pecos River and Union Pacific track. State Highways 329 also run through the county. The named streams on the Census map are the Pecos River. The federal rail map shows about 5 miles of main line track in Crane County: Union Pacific about 2 miles and short line and other operators about 4.

What Is the Ground Like for Directional Boring in Crane County?
Caliche is the main thing to plan for in Crane County: the federal soil survey maps a cemented caliche layer within five feet of the surface on about 24 percent of the county, under a surface that is most often fine sand. Caliche in Crane County drills like soft rock, so the bit, the reamer and the drilling fluid are chosen for it. September is the wettest month in Crane County at 1.7 inches on average and February the driest at 0.6. Crane County averages 13.2 inches of precipitation a year, so the ground is usually dry at bore depth.
- Most common soils: Penwell (25%), Wickett (11%) and Tencee (9%).
- Surface texture: most often fine sand (40%) or loamy fine sand (16%).
- Bedrock within 5 feet: about 7% of the county. Most of it is soft, weathered rock.
- Caliche within 5 feet: about 24% of the county.
- Clay rich layer (35% clay or more) in the top 5 feet: about 3% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 55% of the county.
- Gravelly, cobbly or stony surface soil: about 12% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Ector and Crane Counties, Texas (survey area TX606, version 25, September 8, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Crane County?
The TxDOT Odessa District permits bores under state highways in Crane County, the Crane County Commissioners Court handles county roads, and Crane handles its own streets.
- State highways. Interstate 20, US 385, the other numbered state routes and the farm to market roads in Crane County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under Union Pacific or short line track in Crane County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under the Pecos River is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Crane County?
AEP Texas North and Oncor Electric Delivery Company serve Crane County, according to 2025 filings with the U.S. Energy Information Administration. All are investor owned utilities. Knowing which one holds the territory at the address is the first step on a conduit bore in Crane County. More on electric line boring.
How Much New Construction Is There in Crane County?
Crane County permitted 4 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Crane County went from 4,676 in 2020 to 4,594 in 2024, a loss of 1.8 percent. In Crane County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.
Which Cities and Towns in Crane County Does Trinity Serve?
Trinity takes directional boring work in Crane, the only incorporated place in Crane County with about 3,375 residents, and at sites outside the city limits.
| City or town | 2024 population |
|---|---|
| Crane | 3,375 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Crane County.
Crane County borders Crockett County, Ector County, Pecos County, Upton County and Ward County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Ozona (Crockett), Odessa (Ector), Fort Stockton (Pecos), Rankin (Upton) and Monahans (Ward).
Which Directional Boring Services Are Available in Crane County?
Every Trinity service is available in Crane County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including Interstate 20, US 385 and the Pecos River
- Bores under Union Pacific track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Crane and on rural water systems
- Underground conduit in AEP Texas North and Oncor Electric Delivery Company territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along Interstate 20
- Municipal boring services for Crane
The free Bore Planner sizes a Crane County job before you call.
Crane County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Crane, Texas?
Yes. Trinity Boring Solutions takes work in Crane and the rural parts of Crane County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under Interstate 20 in Crane County?
The TxDOT Odessa District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Crane County Commissioners Court and city streets through the city.
Is there rock in Crane County?
Not much. The federal soil survey records bedrock within five feet of the surface on about 7 percent of Crane County. Caliche shows up within five feet on about 24 percent. Potholing confirms it on the actual bore path.
Can a line be bored under the Pecos River in Crane County?
Yes. A drill is steered below the bed of the Pecos River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Crane County?
Union Pacific and short line operators, with about 5 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Crane County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Crane County?
Length and pipe size give us a general range. Depth, the crossings and the ground set the number, and caliche is a factor on many Crane County jobs.
How Do You Get a Bore Quote in Crane County?
Call (405) 409-7423 any time or send the address in Crane County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.