trinityboringsolutions.com

Christine Texas Directional Boring: Floresville Fine Sandy Loam, FM 140 and Turkey Creek

Quick Answer: I Avenue, L Avenue and 6th Street frame Christine’s 17.23 public road miles, with Turkey Creek running through town. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines crossing Christine streets and Turkey Creek. From our Yukon, Oklahoma main office, Christine is 541 road miles away, and the trip affects crew mobilization. Floresville fine sandy loam covers 47 percent of town, while sandy clay loam below can grip a reamer and calls for controlled fluid and staged passes.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Christine bores at a glance

  • Incorporated city in Atascosa County, Texas. Population 365 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 541 miles, about 10.3 hours of driving.
  • Ground: Floresville soil is mapped on 47 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 140. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Turkey Creek.
  • Public water: City of Christine, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Turkey Creek in Christine?

I Avenue, L Avenue and 6th Street are Christine’s longest named streets; the town has 17.23 public road miles, and Turkey Creek runs through it. The Census Bureau Vintage 2024 estimate puts the Atascosa County town’s population at 365. We install water, sewer, gas, electric conduit and fiber where services need to pass along those streets or beneath Turkey Creek.

Our main office is in Yukon, Oklahoma, and Christine work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. Compared with that reach, a Christine job may be a shorter service line beneath a street or near Turkey Creek, with Trinity handling the work from the first call through the bore log.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Christine and Floresville soil?

The USDA soil survey maps Floresville soil across 47 percent of Christine, with Imogene at 20 percent and Christine soils at 10 percent. Floresville fine sandy loam on 0 to 1 percent slopes covers 25 percent, and the 1 to 3 percent slope map unit covers 22 percent. At about 40 inches below the surface, sandy clay loam accounts for 50 percent of the mapped area and sandy clay for 30 percent. The survey also maps an average clay content of 33 percent at that depth. These are mapped patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Christine city limitsWhat is mapped
Soil series mappedFloresville 47 percent, Imogene 20 percent, Christine 10 percent, Papalote 6 percent and Webb 5 percent
Texture at the surfacefine sandy loam 79 percent, clay loam 15 percent and loam 3 percent
Texture about 40 inches downsandy clay loam 50 percent, sandy clay 30 percent and clay loam 10 percent
Engineering class about 40 inches downlean clay (CL) 93 percent and fat clay (CH) 6 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel46 percent of the area

Bedrock is not mapped within the top five feet, and seasonal water tables are not mapped within 60 inches; neither map result rules out conditions at a particular bore. Flood prone soils cover 10 percent of Christine, so a route near Turkey Creek needs depth planning beneath the channel. High steel corrosion risk is mapped across 46 percent of town, which can affect uncoated casing or tracer wire; the line owner chooses coatings, while HDPE is not subject to that soil corrosion concern. The Yegua Formation, of Bartonian age, includes sandstone and clay, so a bore may encounter changing ground that calls for adjustments as drilling proceeds.

How do our crews handle sandy clay loam in Christine?

Christine’s mapped sandy clay loam and clay layers call for steady steering and controlled drilling fluid. We adjust the reaming plan to the ground along each route, including streets and areas near Turkey Creek.

  1. In Floresville fine sandy loam and the mapped clay below, we use measured fluid and staged reaming to limit sticky cuttings building up on the reamer.
  2. Along I Avenue, our crew tracks the drill head from the surface with a walkover locator and records its depth and pitch as it advances.
  3. Before drilling near Turkey Creek or a marked service line, we expose the utility with hydrovac because surface marks do not show burial depth.
  4. For a Turkey Creek crossing, we plan the bore beneath the channel and check Corps jurisdiction during planning; pits stay on the banks rather than cutting them.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross near I Avenue in Christine?

FM 140 is the state highway mapped inside Christine, with 1.2 roadway miles within town limits. I Avenue is the longest named street at 1.41 miles, followed by L Avenue and 6th Street, each at 1.23 miles. A route on one of those streets may need to pass beneath pavement or driveways, so we plan entry and exit pits in dirt rather than cutting across the surface. The exact alignment determines which road edges and existing lines need to be exposed.

CrossingTypeMapped extentWho has a say
FM 140State highway1.2 roadway miles insideState highway office
Turkey CreekStream0.61 channel miles insideChecked for Corps of Engineers jurisdiction
La Parita CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Christine or within one mile outside its limits, and none of the mapped streets cross a railroad. Turkey Creek runs 0.61 channel miles through town, while La Parita Creek lies 0.3 miles outside the limits. No mapped street crossing of a named stream is recorded in town. A proposed Turkey Creek bore still needs a route planned beneath the channel, with Corps jurisdiction checked during planning; there are no lakes or ponds mapped within one mile.

Who has to sign off on a bore beneath FM 140 in Christine?

Christine is incorporated, so streets such as I Avenue belong to the town; FM 140 is a state highway, and work in its right of way needs a TxDOT utility permit. The TxDOT San Antonio District reviews the highway application. The utility that owns the line files through TxDOT’s online RULIS system, while we prepare the bore plan and profile and work under the permit issued to that owner. For an electric or communication crossing, the plan must account for the required cover below the lowest crossed grade, subject to any depth set by the district. No railroad crossing agreement is indicated for Christine, but a Turkey Creek route is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Atascosa County and Christine?

The City of Christine public water system draws from groundwater wells and reports 232 service connections serving 696 people. Electric service providers reporting in Atascosa County include AEP Texas Central, City of San Antonio, Karnes Electric Cooperative and Medina Electric Cooperative; that list does not identify the provider at every address. Before we plan an electric conduit bore near a Christine water line, we confirm the line owner and use hydrovac potholing to expose marked utilities before drilling close to them.

Line ownerWhat it isSourceSize
City of ChristinePublic water systemGroundwater wells232 connections, 696 people served
AEP Texas Central, City of San Antonio, Karnes Electric Cooperative and Medina Electric CooperativeElectric utilities reporting service in Atascosa CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Christine’s median housing year at 1978; 15 percent of units were built before 1960, 73 percent from 1960 to 1999 and 12 percent in 2000 or later. Those ages make both replacement lines and new service connections possible along streets such as 6th Street, but they do not establish the age of a buried line. We expose marked utilities with hydrovac before the drill approaches, since paint shows a line’s position, not its depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Christine in relation to Pleasanton and our Yukon office?

Christine is an incorporated town in Atascosa County, at an elevation of 326 feet, covering 1.72 square miles. Its ZIP code is 78012. Jourdanton, the county seat, is 9.2 miles north; Pleasanton is 12.3 miles north and is the nearest larger city. Charlotte is 13.3 miles west, Poteet is 17.9 miles north and Leming is 19.6 miles north. From our Yukon, Oklahoma main office, the road distance is 541 miles and the drive is 10.3 hours, which is part of planning mobilization for a Christine bore.

Places near Christine

What would we bore along L Avenue in Christine?

  • FM 140 crossing: A route beneath this state highway needs a bore plan that accounts for its right of way and TxDOT review.
  • Street service: A water or sewer line along I Avenue can pass below pavement, with entry and exit pits placed in dirt.
  • Fiber conduit: A new conduit near L Avenue can be routed beneath the street while marked utilities are exposed before drilling.
  • Creek crossing: A Turkey Creek bore is planned below the channel, with the route checked for Corps jurisdiction during planning.
  • Water service: A connection to the City of Christine groundwater system needs an alignment checked against marked lines before the drill approaches.
  • Electric conduit: A route on 6th Street begins with confirming the line owner and exposing marked utilities by hydrovac.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a 10th Street bore quote in Christine?

For a quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. For a route near 10th Street, note pavement, driveways and any known utility marks so we can assess access and possible potholing before setting a bore path.

The largest cost drivers here start with length and ground conditions: Christine’s mapped clay layers can call for staged reaming and careful fluid control. Next, the number of utilities to expose, pavement or concrete, and any Turkey Creek or drainage crossing can change the work plan. Pit size, excavator time and sand backfill also affect the scope. A job far from our Yukon office adds mobilization, while emergency or high profile work can require a different plan.

Questions people ask about boring in Christine

Does Trinity take directional boring jobs in Christine and Atascosa County?

Yes. We take directional boring work in Christine and Atascosa County. Trinity coordinates each job from the first call through the bore log, with the work handled by our own crews or crews from vetted partner contractors’ satellite yards. For a route near Turkey Creek, the crew and bore plan depend on the job scope.

Who controls 6th Street in Christine, and can a bore avoid cutting it?

Christine is incorporated, so 6th Street is a town street. Directional boring can place a line below the street without opening a trench across the pavement; pits are set in dirt on each side of the bore. The proposed path and marked utilities determine where those pits can go.

Could older lines near L Avenue in Christine need replacement bores?

They could. American Community Survey 2019 to 2023 estimates give Christine a median housing year of 1978, and 15 percent of units predate 1960. That does not establish the age of a buried line along L Avenue, so we expose marked utilities and confirm the route before planning a replacement bore.

Could groundwater or flooding affect bore pits near Turkey Creek in Christine?

Flood prone soils are mapped across 10 percent of Christine, including potential concerns for routes near Turkey Creek. The soil survey does not map seasonal water tables within 60 inches, but that does not confirm dry conditions at a specific pit. We plan pit placement and a creek route around the conditions found at the site.

Can Floresville soil in Christine corrode steel casing, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 46 percent of Christine, so uncoated steel casing and tracer wire need consideration. HDPE is not subject to that soil corrosion concern. The line owner selects any coating for steel, and the planned material depends on the service and project requirements.

What ground is likely along a Floresville soil bore in Christine?

The USDA soil survey maps Floresville soil across 47 percent of Christine. At about 40 inches below ground, sandy clay loam covers 50 percent of the mapped area, with sandy clay at 30 percent. These are survey patterns rather than site samples, so the actual bore route needs field evaluation before the drilling plan is set.

How early should I request 811 for a bore near I Avenue in Christine?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If work near I Avenue starts more than 14 days after the original notice, submit a new request. If marks wear off or move, have them refreshed through Texas811 before work continues.

How far is Christine from the Yukon office, and does that affect a Pleasanton area job?

Christine is 541 road miles and a 10.3 hour drive from our Yukon, Oklahoma main office. That distance is considered when planning crew mobilization for Christine work. Pleasanton is 12.3 miles north of town, but the job location, scope and access still determine how the work is staffed.

What affects the cost of a directional bore near FM 140 in Christine?

The job’s length, pipe size and the clay layers mapped around Christine affect the scope. The number of utilities to expose, pavement, pits and equipment time matter too. A route near FM 140 may require state right of way planning, while Turkey Creek crossings or the distance from Yukon can add work to the plan. We price the work from those job details, not a single local rate.

Where the Christine facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Christine

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Christine, Texas

Type the address of your job in Christine. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Christine

Same county: Lytle. All counties: Texas county list.