Pleasanton Texas Directional Boring: Nusil Soil, Atascosa River And Union Pacific
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Pleasanton for crossings such as the Atascosa River. From our Yukon, Oklahoma main office, Pleasanton is 525 road miles away, so we staff work with our own crews and vetted partner contractor satellite yards while Trinity stays your contact. Nusil soil covers 35% of mapped area, and its sandy surface can cave behind the bit unless drilling fluid supports the hole.
Pleasanton bores at a glance
- Incorporated city in Atascosa County, Texas. Population 11,409 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 525 miles, about 9.9 hours of driving.
- Ground: Nusil soil is mapped on 35 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: US 281, Texas State Highway 97, FM 3510, FM 1334 and Spur 242. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific, with 8 mapped street and rail crossings.
- Named streams inside the boundary: Atascosa River, Bonita Creek and Galvan Creek.
- Public water: City of Pleasanton, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near the Atascosa River in Pleasanton?
Pleasanton is 525 road miles from our Yukon yard, so we use our own crews and vetted partner contractor satellite yards for work in Atascosa County. The Census Bureau Vintage 2024 estimate puts the city at 11,409 people. Along 2nd Street or US 281, we bore water, sewer, gas, electric conduit and fiber without opening the full route.
Our main office is in Yukon, Oklahoma, and Pleasanton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short 3/4 inch service near Main Street or a 48 inch casing at an Atascosa River crossing, our family business began in 1965 and has drilled directionally since 1982. Our crews have gone more than 25 years without a utility strike.

What is Pleasanton ground like around Nusil soil?
The USDA soil survey maps Nusil soil across 35% of Pleasanton, with Poth loamy fine sand covering another 28%. At the surface, 40% of mapped soil is fine sand and 30% is loamy fine sand, so an open bore can cave behind the drill head. Farther down, about 40 inches below the surface, sandy clay loam is mapped across 40% of the area and sandy clay across 32%. These are mapped soil patterns, not test borings. The change from loose surface sand to clayier ground can affect fluid and reaming choices.
| USDA soil survey, inside the Pleasanton city limits | What is mapped |
|---|---|
| Soil series mapped | Nusil 35 percent, Poth 28 percent, Hanis 9 percent, Aluf 6 percent and Sinton 5 percent |
| Texture at the surface | fine sand 40 percent, loamy fine sand 30 percent and sandy clay loam 11 percent |
| Texture about 40 inches down | sandy clay loam 40 percent, sandy clay 32 percent and clay 10 percent |
| Engineering class about 40 inches down | clayey sand (SC) 37 percent, fat clay (CH) 31 percent and lean clay (CL) 23 percent |
| Average clay content about 40 inches down | 32 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 10 percent of the area |
| High corrosion risk for uncoated steel | 17 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 1% of the area, with typical bedrock depth listed at 41 inches. Sparta Sand, a Bartonian geologic unit, includes sand, siltstone and silty clay partings, so conditions can change along a bore. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 10% of the city. High steel corrosion risk is mapped across 17%, a reason to discuss casing and tracer wire materials with the line owner.
What does it take to bore Pleasanton sandy clay loam?
Nusil and Poth soils put fine sand near the surface and more clay at depth. On a Pleasanton bore, we match the fluid and reaming plan to the material the drill is cutting.
- At Nusil and Poth locations, the fine sandy surface can fall in behind the bit, so we use drilling fluid to support the hole and ream in stages.
- Where the USDA survey maps sandy clay loam or heavy clay near Pleasanton, we watch fluid returns and adjust the drilling plan to avoid lifting pavement.
- Before a bore near Main Street or a City of Pleasanton water line, we hydrovac pothole each marked utility on the path to check its depth.
- On a crossing near the Atascosa River, we track the drill head from the surface and log depth and pitch as the bore advances.

Where does a Pleasanton line go under 2nd Street?
US 281, Texas State Highway 97, FM 3510, FM 1334, Spur 242, FM 3350 and FM 476 run inside Pleasanton. A bore under one of those routes needs a plan for the highway right of way and its pavement. The mapped street network includes 2nd Street at 7.03 miles, Main Street at 3.56 miles and Goodwin Street at 3.01 miles. Oaklawn Road adds another 2.96 miles. These long routes offer places where a bore can pass below pavement instead of cutting across it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 9.7 roadway miles inside | State highway office |
| Texas State Highway 97 | State highway | 7.1 roadway miles inside | State highway office |
| FM 3510 | State highway | 1.5 roadway miles inside | State highway office |
| FM 1334 | State highway | 1.4 roadway miles inside | State highway office |
| Spur 242 | State highway | 1.2 roadway miles inside | State highway office |
| FM 3350 | State highway | 1.1 roadway miles inside | State highway office |
| FM 476 | State highway | 1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.61 track miles inside | The railroad |
| Atascosa River | Stream | 2.39 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bonita Creek | Stream | 2.01 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Galvan Creek | Stream | 0.12 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Gallinas Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| Bonita Lake | Lake or pond | 5 acres, nearby | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.61 track miles inside Pleasanton on its Corpus Christi Subdivision, and public mapping shows 8 street and rail crossings. The Atascosa River runs 2.39 channel miles in the city, while Bonita Creek runs 2.01 miles and Galvan Creek 0.12 miles. Public mapping also shows 11 street crossings of named streams. Bonita Lake is just outside the city limits. A creek or lake crossing needs a route and depth plan that accounts for the channel and site access.
Who approves Pleasanton bores near Union Pacific tracks?
US 281 and Texas State Highway 97 are TxDOT routes, as are the farm to market roads in Pleasanton. Work in their right of way needs a utility permit reviewed by the TxDOT San Antonio District. The utility owner, not the drilling contractor, submits the application through TxDOT’s RULIS system; we provide the bore plan and profile for that filing. A crossing of Union Pacific track needs an agreement with the railroad, which sets casing, depth and flagging. For the Atascosa River, Bonita Creek or another water crossing, planning checks whether the U.S. Army Corps of Engineers has jurisdiction. Pleasanton’s city streets belong to the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near City of Pleasanton water mains?
The City of Pleasanton public water system draws from groundwater wells and reports 5,995 service connections serving 17,985 people. That network can affect a bore along 2nd Street or Main Street, so the planned path needs utility locates and exposure of marked lines before drilling near them. In Atascosa County, AEP Texas Central, City of San Antonio, Karnes Electric Cooperative and Medina Electric Cooperative report electric service. The line owner for a specific address is confirmed before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Pleasanton | Public water system | Groundwater wells | 5,995 connections, 17,985 people served |
| AEP Texas Central, City of San Antonio, Karnes Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Atascosa County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Pleasanton’s median housing year at 1984. The survey shows 13% of homes built before 1960, 63% from 1960 to 1999 and 24% from 2000 onward. A replacement bore near Main Street may meet older buried lines, while a newer service on Goodwin Street still needs a clear route. We hydrovac pothole marked utilities along the bore path because locate paint shows position, not depth.

What is near Pleasanton and San Antonio?
Pleasanton is an incorporated city in Atascosa County, with an elevation of 410 feet and a land area of 8.98 square miles. Its ZIP code is 78064. Jourdanton, the county seat, is 4.4 miles southwest; Poteet is 6.9 miles northwest and Leming is 7.3 miles north. San Antonio is 34.5 miles north and is the nearest larger city. From our Yukon yard, the trip is 525 road miles and 9.9 drive hours. That distance is part of planning crew and equipment mobilization for a Pleasanton job.
Places near Pleasanton
- Directional boring in Jourdanton: 4.4 miles southwest
- Directional boring in Poteet: 6.9 miles northwest
- Directional boring in Leming: 7.3 miles north
- Directional boring in Christine: 12.3 miles south
- Directional boring in Charlotte: 14.4 miles southwest
- San Antonio: 34.5 miles north
What kinds of bores come up near Pleasanton’s Goodwin Street?
- Highway crossing: A bore below US 281 or Texas State Highway 97 keeps the line beneath the road surface, with right of way planning for the route.
- Water service: A new connection near Main Street can use a bore to reach the City of Pleasanton groundwater system without cutting the street.
- Fiber conduit: A route along Goodwin Street can pass beneath pavement, with potholes to check marked utilities before the drill approaches them.
- Creek crossing: A line beneath Bonita Creek needs a planned depth and a check for U.S. Army Corps of Engineers jurisdiction during planning.
- Rail crossing: A route beneath Union Pacific track requires coordination with the railroad on its Corpus Christi Subdivision before the crossing is set.
- Airport service: A bore near Pleasanton Municipal Airport can be scoped around the line destination, route length and any marked utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Pleasanton bore near Oaklawn Road?
For a Pleasanton quote, start with the address or map pin, such as a location on Oaklawn Road. Tell us what will go in the ground, whether it is water pipe or fiber conduit, then give the size and footage. A sketch or plans help show how the route relates to US 281, a creek or nearby utilities.
The scope sets the price. The 525 road miles from Yukon affect mobilization, while Nusil’s sandy surface and clay farther down can change the drilling and reaming plan. A crossing of Union Pacific track or US 281 adds coordination and permit work. We also account for pipe size and length, marked utilities to expose, pavement, creek crossings, pits, excavator time, sand backfill and emergency timing.
Questions people ask about boring in Pleasanton
Does Trinity Boring Solutions take directional boring jobs in Pleasanton, Atascosa County?
Yes. We take directional boring work in Pleasanton and serve Texas from our Yukon main office. For Atascosa County jobs, work is handled by our own crews or from satellite yards run by partner drilling contractors we have vetted. You deal with Trinity from the first call through the bore log, regardless of which crew is on site.
Can you bore a line under the Atascosa River in Pleasanton?
A bore under the Atascosa River can be planned, subject to the route, ground and access. The river has 2.39 channel miles inside Pleasanton. During planning, we check whether the U.S. Army Corps of Engineers has jurisdiction over the crossing, then develop a bore path and depth plan for the site.
Who runs Pleasanton’s public water system, and where does the water come from?
The City of Pleasanton owns the public water system, which gets water from groundwater wells. It reports 5,995 service connections and 17,985 people served. For a bore near a water main on Main Street, we need utility locates and potholing so the drill path accounts for the buried line.
Who owns electric lines in Pleasanton, Atascosa County, and who confirms conduit specs?
The county reports electric service from AEP Texas Central, City of San Antonio, Karnes Electric Cooperative and Medina Electric Cooperative. That does not identify the provider at every Pleasanton address. The line owner needs to be confirmed for the specific route before a conduit bore, including the conduit requirements for that line.
Who is responsible for Pleasanton streets like Goodwin Street, and must they be cut?
Goodwin Street is a city street, so Pleasanton’s city government is responsible for its streets. A directional bore can pass below the pavement rather than opening the full roadway. The route still needs to account for marked utilities and any permitted crossings on the way to the connection.
How old are homes and buried lines near Pleasanton’s Main Street?
The American Community Survey 2019 to 2023 estimates give Pleasanton a median housing year of 1984, with 13% of homes built before 1960. That age can mean replacement work must account for older buried utilities, but housing age does not establish a line’s location or depth. We expose marked lines before drilling near them.
Can I reach Trinity after hours for an urgent Pleasanton bore near Goodwin Street?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent bore near Goodwin Street, tell us the location, what line is involved and what work is needed so we can discuss the response and access.
How much notice does Texas811 need for a Pleasanton bore along 2nd Street?
For a bore along 2nd Street, Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. Texas811 describes that as at least two working days. Request it no earlier than 14 days before work, and get a new notice if the start slips more than 14 days past the original notice. Worn or moved marks must be refreshed before work continues.
What affects the cost of directional boring in Pleasanton near US 281?
A US 281 bore is priced around its actual scope, not just its length. Length, pipe or conduit size, Nusil soil conditions, pavement, the number of utilities to expose and any highway crossing all affect the work. Creek crossings, pits, excavator time, sand backfill, emergency scheduling and mobilization from Yukon also affect the estimate.
Where the Pleasanton facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Pleasanton
- U.S. Census Bureau, TIGER/Line 2024: Pleasanton boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Pleasanton
- U.S. Census Bureau, American Community Survey 2019 to 2023: Pleasanton housing units and year built
- Macrostrat geologic map compilation: map units under Pleasanton
- U.S. EPA Safe Drinking Water Information System: public water systems serving Pleasanton
- U.S. Department of Transportation, North American Rail Network: track owners in Atascosa County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Atascosa County
- U.S. Geological Survey, Elevation Point Query Service: Pleasanton elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Pleasanton
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Pleasanton
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Pleasanton, Texas
Type the address of your job in Pleasanton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Pleasanton
Same county: Lytle. All counties: Texas county list.
