Granite Shoals Texas Directional Boring: Voca Soil, RM 1431 and Elm Creek
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Granite Shoals for lines that need to pass beneath Elm Creek or a street. Granite Shoals is 400 road miles from our Yukon, Oklahoma main office, so a bore near RM 1431 is staffed by our own crews or vetted partner crews from satellite yards. Voca soil has very gravelly clay mapped at 40 inches, which can cling to tooling and pipe. We plan the reaming and fluid use around that ground.
Granite Shoals bores at a glance
- Incorporated city in Burnet County, Texas. Population 5,417 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 400 miles, about 8.2 hours of driving.
- Ground: Voca soil is mapped on 79 percent of the area, with very gravelly clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 6 percent of the area.
- Highways inside the boundary: RM 1431. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: Austin Western Railroad (line shown as out of service), with 1 mapped street and rail crossings.
- Named streams inside the boundary: Elm Creek and Deep Creek.
- Public water: City of Granite Shoals, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can handle directional boring near Elm Creek in Granite Shoals?
We take directional boring work in Granite Shoals, Burnet County, where the Census Bureau Vintage 2024 estimate puts the population at 5,417. Along Honeymoon Ranch Road or near RM 1431, we install water, sewer, gas, electric conduit and fiber lines when the route needs to pass under pavement or avoid cutting the surface.
Our main office is in Yukon, Oklahoma, and Granite Shoals work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been directional boring since 1982. Four decades of boring helps us plan for Voca soil, where gravelly surface material gives way to very gravelly clay at depth. We are a family business that started in 1965, and we stay involved from the first call through the bore log.

What is Voca soil like to bore in Granite Shoals?
The USDA soil survey maps Voca soil across 79 percent of Granite Shoals. The mapped surface texture is gravelly sandy loam, while the texture at about 40 inches is very gravelly clay across that same mapped share. Average clay content at that depth is 41 percent. This is a mapped pattern, not a test at a particular address, so a site check still matters. Gravel can deflect the drill head, while sticky clay can build up on a reamer and grip pipe during the pullback.
| USDA soil survey, inside the Granite Shoals city limits | What is mapped |
|---|---|
| Soil series mapped | Voca 79 percent and Keese 6 percent |
| Texture at the surface | gravelly sandy loam 79 percent and coarse sandy loam 6 percent |
| Texture about 40 inches down | very gravelly clay 79 percent and bedrock 6 percent |
| Engineering class about 40 inches down | clayey sand (SC) 79 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 6 percent of the area (0 percent hard rock, 6 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
The USDA soil survey maps bedrock within 60 inches on 6 percent of Granite Shoals, with weathered bedrock in that mapped share; hard bedrock is not mapped within that depth. Typical bedrock depth is 14 inches, so the route still needs attention where rock appears. Seasonal water table and flood prone soils are not mapped, and high steel corrosion risk is not mapped. Town Mountain Granite, a Stenian age unit, is the local geologic map unit; encountering granite can call for slower rock drilling and careful steering.
How do we bore very gravelly clay in Granite Shoals?
Near Granite Shoals streets and Elm Creek, we match the drilling setup to the changing ground. Voca soil has gravelly material over very gravelly clay, so we watch returns and keep the hole stable as the reamer advances.
- With Voca soil’s gravelly sandy loam over very gravelly clay, we adjust fluid and reaming stages to keep sticky material from loading the tools.
- Where gravel in Granite Shoals could push the drill head off line, we check depth and pitch as each rod advances.
- If Town Mountain Granite is encountered, we slow down and use rock drilling methods suited to the harder material.
- Near a marked utility along Honeymoon Ranch Road, we hydrovac pothole to verify its depth before the drill approaches.

Where might a Granite Shoals line pass under RM 1431?
RM 1431 is the state highway mapped for 6.5 roadway miles inside Granite Shoals, so work in its right of way needs TxDOT review. The city street network includes 98.13 public road centerline miles. Honeymoon Ranch Road is the longest named street at 2.35 miles, followed by Phillips Ranch Road at 2.32 miles and Shorewood Drive at 1.98 miles. A route under those streets can keep pavement intact, but its pits and bore path still need to fit the available site access.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| RM 1431 | State highway | 6.5 roadway miles inside | State highway office |
| Austin Western Railroad (line shown as out of service) | Railroad | 0.39 track miles inside | The railroad |
| Elm Creek | Stream | 1.53 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Deep Creek | Stream | 0.82 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Station Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Lyndon B Johnson | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Dry Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Williams Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Lyndon B Johnson | Lake or pond | 2,668 acres, inside | Checked for Corps of Engineers jurisdiction |
| Lake Marble Falls | Lake or pond | 563 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Long Rock Tank | Lake or pond | 2 acres, nearby | Checked for Corps of Engineers jurisdiction |
Austin Western Railroad (line shown as out of service) has 0.39 track miles in Granite Shoals, with one mapped street and rail crossing in the city. Any bore under that track needs the railroad owner’s crossing agreement. Elm Creek has 1.53 channel miles in town and Deep Creek has 0.82; public mapping shows six street crossings of named streams. Lake Lyndon B Johnson is also inside the limits, so a water crossing needs jurisdiction checked during planning.
Whose approval does a Granite Shoals bore need in Burnet County?
Granite Shoals is incorporated, so its city streets belong to the city itself. For a bore in RM 1431 right of way, the line owner, not the driller, files through TxDOT’s RULIS system for review by the TxDOT Austin District; we provide the bore plan and profile. On highway crossings, electric and communication lines need 60 inches of cover below the lowest crossed grade, and water lines need 60 inches; the permit can set another depth. A railroad crossing needs the owner’s agreement, and an Elm Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction. For a bore along Honeymoon Ranch Road, the caller describes the path to Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. A delay beyond 14 days requires a new notice, and worn or moved marks must be refreshed through Texas811 before work continues.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Granite Shoals, including the City of Granite Shoals?
The City of Granite Shoals public water system uses surface water and reports 2,265 service connections serving 6,795 people. That makes water line ownership and connection points useful details for planning work near RM 1431 or a city street. Oncor Electric Delivery Company and Pedernales Electric Cooperative report electric service in Burnet County. We confirm the line owner for the specific address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Granite Shoals | Public water system | Surface water | 2,265 connections, 6,795 people served |
| Oncor Electric Delivery Company and Pedernales Electric Cooperative | Electric utilities reporting service in Burnet County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Granite Shoals’ median housing year at 1984. The survey reports 72 percent of homes built from 1960 to 1999 and 26 percent built in 2000 or later. That mix can mean either replacement work or a new service near Honeymoon Ranch Road. Before drilling near a marked utility, we hydrovac pothole to expose it; paint shows its position, not its depth.

Where is Granite Shoals near Highland Haven?
Granite Shoals is an incorporated city in Burnet County, at an elevation of 849 feet and covering 7.06 square miles. Its ZIP code is 78654. Highland Haven is 2.1 miles northwest, Sunrise Beach Village is 3.1 miles west, and Cottonwood Shores is 3.3 miles southeast. Burnet, the county seat, is 13.6 miles northeast; Lakeway is the nearest larger city at 27.9 miles southeast. Our Yukon, Oklahoma main office is 400 road miles away, or 8.2 hours by road, which can affect mobilization for a Granite Shoals job.
Places near Granite Shoals
- Directional boring in Highland Haven: 2.1 miles northwest
- Directional boring in Sunrise Beach Village: 3.1 miles west
- Directional boring in Cottonwood Shores: 3.3 miles southeast
- Directional boring in Horseshoe Bay: 3.4 miles south
- Directional boring in Meadowlakes: 4.6 miles east
- Directional boring in Lakeway: 27.9 miles southeast
What could we bore near Elm Creek in Granite Shoals?
- Highway crossing: A route under RM 1431 needs a bore plan for the TxDOT right of way and room for pits clear of the travel lanes.
- Water service: A connection near Honeymoon Ranch Road can be routed below the street surface toward the City of Granite Shoals water system.
- Creek crossing: A route beneath Elm Creek needs planning around the channel and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: Work under the Austin Western Railroad track in Granite Shoals needs a crossing agreement from the track owner.
- Fiber conduit: A fiber route along Shorewood Drive can use a bore to avoid opening the paved street.
- Park service: A line near Bluebriar Park can be bored with entry and exit pits placed in workable ground beside the route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Granite Shoals quote near Honeymoon Ranch Road?
For a quote near Honeymoon Ranch Road, send the street address or a map pin first. Tell us what is going in the ground, such as water or fiber, then the pipe or conduit size and the footage. A sketch or plans help us see how the route relates to RM 1431, driveways, and any creek or drainage crossing.
Voca soil is a key cost factor because the gravelly clay at depth can change reaming and pullback time. Length and pipe or conduit size shape the equipment and work plan. We also consider utilities to expose, pavement or concrete, creek and drainage crossings such as Elm Creek, and the pits, excavator time and sand backfill needed at the site. Mobilization matters too, since Granite Shoals is 400 road miles from our Yukon main office.
Questions people ask about boring in Granite Shoals
Does Trinity Boring Solutions take jobs in Granite Shoals, Burnet County?
Yes. We take directional boring work in Granite Shoals, Burnet County, and staff it with our own crews or crews from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether the route is near Elm Creek or RM 1431.
Is there rock close to the surface in Granite Shoals?
The USDA soil survey maps bedrock within five feet on 6 percent of Granite Shoals, and that mapped bedrock is weathered; hard bedrock is not mapped within five feet. Town Mountain Granite is the geologic unit shown for the area. A route still needs to account for rock if it is encountered at a particular site.
Who approves a bore under RM 1431 in Granite Shoals?
The line owner files the utility permit through TxDOT’s RULIS system, and the TxDOT Austin District reviews the RM 1431 work. We prepare the bore plan and profile for the owner’s application. The permitted cover depends on the line type and crossing, and the district can require a different depth.
What does a crossing under Austin Western Railroad (line shown as out of service) in Granite Shoals require?
A crossing under the Austin Western Railroad track needs an agreement from the railroad that owns it, even though the line is shown as out of service. The agreement sets the casing, depth and flagging details. Public mapping shows 0.39 track miles and one mapped street and rail crossing in Granite Shoals.
Can a line be bored under Elm Creek in Granite Shoals?
A bore can be planned under Elm Creek, but the crossing needs review for U.S. Army Corps of Engineers jurisdiction during planning. Elm Creek has 1.53 channel miles mapped in Granite Shoals. The route, depth and access for the entry and exit pits depend on the site conditions.
Who runs the Granite Shoals water system, and where does its water come from?
The City of Granite Shoals owns and runs the public water system, which uses surface water. It reports 2,265 service connections and serves 6,795 people. For a bore near RM 1431, confirming the specific water line owner and location helps us plan utility exposure.
How much 811 notice do I need for a bore on Honeymoon Ranch Road in Granite Shoals?
Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Honeymoon Ranch Road start slips more than 14 days past the original notice, make a new request. Worn or moved marks need refreshing through Texas811 before work continues.
Does the distance from Lakeway change a Granite Shoals bore job?
Granite Shoals is 400 road miles and 8.2 hours by road from our Yukon, Oklahoma main office. Lakeway is 27.9 miles southeast, but it is not the measure of our mobilization from Yukon. The distance from our main office can affect mobilization planning for work near Elm Creek or RM 1431.
What affects the cost of directional boring near RM 1431 in Granite Shoals?
The main factors are bore length, line size, Voca soil and rock conditions, utilities to expose, pavement, crossings, pits and equipment time. Work under RM 1431 or near Elm Creek can add crossing and access demands. Mobilization from our Yukon main office also matters because Granite Shoals is 400 road miles away.
Where the Granite Shoals facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Granite Shoals
- U.S. Census Bureau, TIGER/Line 2024: Granite Shoals boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Granite Shoals
- U.S. Census Bureau, American Community Survey 2019 to 2023: Granite Shoals housing units and year built
- Macrostrat geologic map compilation: map units under Granite Shoals
- U.S. EPA Safe Drinking Water Information System: public water systems serving Granite Shoals
- U.S. Department of Transportation, North American Rail Network: track owners in Burnet County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Burnet County
- U.S. Geological Survey, Elevation Point Query Service: Granite Shoals elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Granite Shoals
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Granite Shoals
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Granite Shoals, Texas
Type the address of your job in Granite Shoals. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Granite Shoals
Same county: Marble Falls · Burnet · Bertram · Double Horn · Briggs. All counties: Texas county list.
