trinityboringsolutions.com

Silverton Texas Directional Boring: Pullman Clay Loam, Highway 86 and Main Street

Quick Answer: On Texas State Highway 86 and Main Street, Trinity Boring Solutions takes directional boring work in Silverton, Texas, also called horizontal directional drilling (HDD), to put lines below paved crossings. Silverton sits 271 road miles from our Yukon, Oklahoma main office, so our own crews and vetted partner crews staff work near Braidfoot Street. The USDA soil survey maps Pullman clay loam with 39 percent clay at 40 inches, so sticky cuttings can load the reamer and grip the pipe. Staged reaming and a same day pull help manage that Pullman ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Silverton bores at a glance

  • County seat of Briscoe County, Texas. Population 653 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 271 miles, about 5.6 hours of driving.
  • Ground: Pullman soil is mapped on 100 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 86, Texas State Highway 256 and Texas State Highway 207. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Silverton Municipal Water System, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Silverton, Briscoe County?

The 271 road miles from our Yukon yard shape how we staff work in Silverton, with our own crews and vetted partner crews. The Census Bureau Vintage 2024 estimate puts the city at 653 people. Water, sewer, gas, electric conduit and fiber lines can run beneath streets such as Braidfoot Street, with the route set to the job and existing utilities.

Our main office is in Yukon, Oklahoma, and Silverton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. For a service route near Texas State Highway 86, our work ranges from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show for Silverton and Pullman soil?

The USDA soil survey maps Pullman soil across Silverton, with Pullman clay loam on 0 to 1 percent slopes. Clay loam is mapped at the surface and at about 40 inches below the surface. The survey reports an average of 39 percent clay at that depth and maps heavy clay across the area. Sandy soil is not mapped there at about 40 inches. These are mapped soil patterns, not test borings. For a bore near Main Street, clay can stay around the hole, but it can also stick to the reamer and grip pipe.

USDA soil survey, inside the Silverton city limitsWhat is mapped
Soil series mappedPullman 100 percent
Texture at the surfaceclay loam 100 percent
Texture about 40 inches downclay loam 100 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Bedrock is not mapped in the top five feet of Silverton, though that does not rule out rock deeper down. The soil survey maps no seasonal water table within 60 inches and no flood prone soil, so those conditions are not mapped constraints for a typical route. High steel corrosion risk is mapped across the area, which makes the line owner’s choice of coating relevant for steel casing or tracer wire. The geologic map lists Eolian Sheet Sand of Cenozoic age and Cenozoic sedimentary rocks of Paleocene age; those units do not replace checking the actual bore path.

How do we drill Silverton’s clay loam?

Pullman clay loam is mapped across Silverton, and its clay can cling to the reamer. We plan the bore around the route, control the fluid and keep the pipe ready for the pull.

  1. We check the proposed route by Main Street against locates and access before setting pits, since mapped Pullman clay loam does not show the exact buried utilities.
  2. We hydrovac pothole every marked utility on the bore path before drilling near it; for a proposed line beneath Main Street, we expose the crossing utility first.
  3. In Silverton’s heavy Pullman clay loam, we use thinner fluid with polymer and ream in stages to limit sticky buildup on the reamer.
  4. We track the drill head from the surface and log depth and pitch, then pull the pipe the same day the opened hole is ready.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Silverton near Main Street?

Texas State Highway 86, Texas State Highway 256 and Texas State Highway 207 each have mapped roadway within Silverton. Main Street and Braidfoot Street each run 1.01 miles in the city, while Loretta Street also runs 1.01 miles. A route beneath one of these roads needs its own crossing plan and utility checks. Where a line goes beneath existing highway pavement, the state requires boring or tunneling rather than open trenching. On a rural highway crossing, the bore must extend beneath all travel lanes.

CrossingTypeMapped extentWho has a say
Texas State Highway 86State highway1 roadway miles insideState highway office
Texas State Highway 256State highway1 roadway miles insideState highway office
Texas State Highway 207State highway0.7 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Silverton or within 1 mile outside the city, and no street and rail crossings are mapped. No streams are mapped inside the city or within 1 mile outside it, and no lakes or ponds are mapped within 1 mile. That leaves no mapped local rail or water crossing to plan around on a route by Braidfoot Street, but the proposed alignment still needs to be checked against actual site conditions.

Do I need a permit to bore under Silverton’s Texas State Highway 86?

For a bore in the Texas State Highway 86 right of way, the line owner, not the driller, submits the utility permit application through TxDOT’s online RULIS system. TxDOT Childress District reviews it. We give the line owner the bore plan and profile and work under the permit issued to that owner. At a highway crossing, electric and communication lines need 60 inches of cover below the lowest point of the crossed grade; water lines need 60 inches and pressurized sewer lines need 60 inches. The district can set a different depth in the permit. Silverton’s city streets belong to the city itself, and no railroad or stream crossing is mapped locally.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near Silverton Municipal Water System?

Silverton Municipal Water System is locally owned and uses purchased surface water. It serves 597 people through 342 service connections, so a proposed water route near Braidfoot Street should be checked against the existing system. AEP Texas North, Southwestern Public Service and Lighthouse Electric Cooperative report service in Briscoe County. We confirm the line owner before planning an electric conduit bore; the countywide list does not establish which provider serves a particular address.

Line ownerWhat it isSourceSize
Silverton Municipal Water SystemPublic water systemSurface water bought from another system342 connections, 597 people served
AEP Texas North, Southwestern Public Service and Lighthouse Electric CooperativeElectric utilities reporting service in Briscoe CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Silverton’s median housing year at 1960. The estimates show 51 percent of housing built before 1960, 45 percent from 1960 to 1999 and 4 percent built in 2000 or later. A replacement route near Loretta Street may encounter older buried service lines, while a new service still needs a clear path. We hydrovac pothole every marked utility on the bore path before drilling near it, since locate paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Silverton in relation to Quitaque?

Silverton is the incorporated county seat of Briscoe County, at an elevation of 3,272 feet and with a land area of 1.01 square miles. Its ZIP code is 79257. Quitaque is 15.9 miles southeast, and Turkey is 23.9 miles east. Plainview, the nearest larger city listed, is 30.8 miles southwest. The Yukon yard is 271 road miles away, a drive of 5.6 hours. Those distances matter when planning a bore near Texas State Highway 86, because mobilization is part of the job scope.

Places near Silverton

Which jobs call for a bore near Silverton’s Braidfoot Street?

  • Highway crossing: A line beneath Texas State Highway 86 needs a bore plan that follows the TxDOT permit and cover requirements.
  • Water service: A connection near Braidfoot Street needs a route checked against Silverton Municipal Water System lines and other marked utilities.
  • Fiber drop: A fiber route along Main Street can pass below pavement without cutting the street surface.
  • Electric conduit: Near Loretta Street, we confirm the line owner and expose marked utilities before drilling the conduit path.
  • Airport service: A proposed service route near Silverton Municipal Airport needs its own map pin, footage and utility checks.
  • Replacement bore: A line near 13th Street can be routed beneath the street surface while the existing service path is checked.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Silverton bore near 13th Street?

Send a map pin or address first, especially for a proposed route near 13th Street, where the exact crossing point shapes access and utility checks. Tell us what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route, pits and any pavement before we scope the bore.

Price follows the Silverton job scope. Pullman clay loam matters because sticky clay can call for staged reaming and careful fluid control. A Texas State Highway 86 crossing adds permit, cover and pavement requirements. Length, pipe or conduit size, marked utilities to expose, pavement, pits and excavator time also affect the work. Mobilization matters at 271 road miles from Yukon, and emergency or high profile work can change the plan.

Questions people ask about boring in Silverton

Does Trinity Boring Solutions take directional boring jobs in Silverton, Briscoe County?

Yes. We take directional boring work in Silverton, including routes beneath streets such as Braidfoot Street. The job is handled by our own crews or by crews at partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, regardless of which crew is at the site.

Can Silverton replacement bores near Braidfoot Street deal with older buried lines?

Yes. The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1960, with 51 percent of homes built before 1960. A replacement bore near Braidfoot Street needs the marked utilities exposed before drilling close to them, since older service routes may not match the proposed path.

Does Silverton’s Pullman soil create a corrosion concern for steel pipe?

The USDA soil survey maps high steel corrosion risk across Silverton, including Pullman clay loam. That makes coating a consideration for steel casing or tracer wire, with the line owner selecting what is appropriate. HDPE is not subject to that soil corrosion concern, so material choice should match the line and project requirements.

What ground does a bore pass through in Silverton’s Pullman soil?

Pullman clay loam is mapped across Silverton, including at about 40 inches below the surface. The USDA soil survey reports an average of 39 percent clay at that depth and maps heavy clay throughout the area. Clay can hold an open hole, but it can stick to the reamer, so staged reaming and fluid control matter.

Will a directional bore in Silverton hit rock?

Bedrock is not mapped in Silverton’s top five feet, but that does not rule out rock deeper down. The geologic map lists Eolian Sheet Sand of Cenozoic age and Cenozoic sedimentary rocks of Paleocene age. Those mapped units help describe the area, but the actual bore path and depth still guide the drilling plan.

Who approves a bore beneath Texas State Highway 86 in Silverton?

TxDOT reviews the right of way utility permit through TxDOT Childress District. The utility line owner submits the application in RULIS, and we provide the bore plan and profile for that filing. For Texas State Highway 86, the approved permit sets the project conditions, including any required cover depth.

Can I reach someone after hours about an urgent bore near Silverton’s Loretta Street?

Yes. Call (405) 409-7423; a person answers 24 hours a day. For an urgent job near Loretta Street, share the location and what line is involved so we can understand the situation and discuss the next step.

How much notice does Texas811 need for a Silverton bore near Main Street?

The locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. For a bore near Main Street, the person requesting the locate should describe the path clearly. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near Texas State Highway 86 in Silverton?

The route length and pipe or conduit size matter, as do Pullman clay loam, utilities to expose, pavement, pits and excavator time. A Texas State Highway 86 crossing brings permit and cover considerations. Mobilization from Yukon also affects the job because Silverton is 271 road miles from the yard. Emergency or high profile work can add scope.

Where the Silverton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Silverton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Silverton, Texas

Type the address of your job in Silverton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Silverton

All counties: Texas county list.