trinityboringsolutions.com

Plainview Texas Directional Boring: Pullman Clay Loam, Interstate 27 and BNSF Railway

Quick Answer: Interstate 27 and BNSF Railway tracks are major route constraints; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Plainview and across Texas. Plainview is 331 road miles from our Yukon, Oklahoma main office, so mobilization matters for a Columbia Street connection. USDA maps Pullman soil across 62 percent of the city, with clay loam common around 40 inches down. That sticky ground can load a reamer and grip pipe, so we manage fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Plainview bores at a glance

  • County seat of Hale County, Texas. Population 19,429 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 331 miles, about 6.1 hours of driving.
  • Ground: Pullman soil is mapped on 62 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 27, Interstate 27 Business, US 87, US 70 and Texas State Highway 194. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway, with 52 mapped street and rail crossings.
  • Public water: Plainview Municipal Water System, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Columbia Street in Plainview?

We take directional boring projects in Plainview, the Hale County seat. For Plainview planning, we use the Census Bureau Vintage 2024 estimate of 19,429 residents when considering underground work. Along Columbia Street, 5th Street or a route near Interstate 27, we install water, sewer, gas, electric conduit and fiber lines by boring under the surface where the route calls for it.

Our main office is in Yukon, Oklahoma, and Plainview work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have performed directional boring since 1982, experience that informs our Plainview planning. For a Columbia Street route, our work ranges from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does Pullman soil mean for a Plainview bore?

The USDA soil survey maps Pullman soil across 62 percent of Plainview, mostly as Pullman clay loam on 0 to 1 percent slopes. Surface texture is clay loam across 75 percent of the city and loam across 22 percent. About 40 inches below the surface, the mapped texture is clay loam across 83 percent and clay across 16 percent. For underground work in Plainview, we account for the average clay content at that depth, 39 percent, when planning a bore. These are mapped patterns, not test borings, so the route still needs field assessment.

USDA soil survey, inside the Plainview city limitsWhat is mapped
Soil series mappedPullman 62 percent, Olton 14 percent, Lofton 13 percent and Mansker 5 percent
Texture at the surfaceclay loam 75 percent and loam 22 percent
Texture about 40 inches downclay loam 83 percent and clay 16 percent
Engineering class about 40 inches downlean clay (CL) 84 percent and fat clay (CH) 16 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches16 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel93 percent of the area

The soil survey maps a seasonal water table within 60 inches across 16 percent of Plainview, so some pits may need pumping. For Plainview boring plans, we treat the absence of mapped flood prone soils as a mapping condition, not a substitute for site checks. Bedrock is not mapped in the top five feet, though deeper rock is not ruled out. High steel corrosion risk is mapped across 93 percent, a concern for steel casing and tracer wire that the line owner should address. The geologic map includes Eolian sheet sand of Cenozoic age and Cenozoic sedimentary rocks of Paleocene age.

How do crews bore Plainview clay loam?

Pullman clay loam dominates the mapped ground in Plainview. We adjust the drilling fluid and reaming sequence to keep sticky soil moving without putting excess pressure under streets such as Columbia Street.

  1. We use thinner drilling fluid and polymer in sticky Pullman clay loam, then ream in stages to limit soil buildup on the reamer.
  2. With 39 percent average clay content mapped at about 40 inches, we watch fluid returns so pressure does not lift Columbia Street pavement.
  3. We prepare the pipe before the final ream and pull it through the open hole the same day to limit the chance that clay grips it.
  4. At a Plainview site where the seasonal water table is shallow, we keep pits small and pump water as needed before the bore proceeds.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a Plainview line pass beneath BNSF Railway?

Interstate 27, Interstate 27 Business, US 87 and US 70 run inside Plainview, along with Texas State Highway 194 and several farm to market roads. A route across any of those state rights of way needs TxDOT review. Columbia Street is the longest named street in the city at 6.98 miles, followed by 5th Street at 4.98 miles and 3rd Street at 3.97 miles. A bore can keep those paved routes uncut while pits sit beyond the crossing.

CrossingTypeMapped extentWho has a say
Interstate 27Interstate9.8 roadway miles insideState highway office
Interstate 27 BusinessInterstate8.2 roadway miles insideState highway office
US 87US highway9.8 roadway miles insideState highway office
US 70US highway5.7 roadway miles insideState highway office
Texas State Highway 194State highway3.7 roadway miles insideState highway office
FM 3466State highway3.1 roadway miles insideState highway office
FM 400State highway3 roadway miles insideState highway office
FM 2286State highway0.9 roadway miles insideState highway office
BNSF RailwayRailroad13.49 track miles insideThe railroad
Lubbock and Western RailwayRailroad nearby0.3 miles outsideThe railroad
Swipe the table sideways to see every column.

BNSF Railway has 13.49 track miles inside Plainview, and the mapped street and rail crossing count is 52. A route under the track needs coordination with the railroad. No named streams are mapped inside the city, though the map shows 6.44 miles of unnamed drainage. Within one mile of Plainview, we have no mapped lakes or ponds to account for when planning a boring alignment. The drainage route and nearby track still need to be checked against the actual bore alignment.

Who approves a Plainview bore in Hale County?

Plainview is incorporated, so city streets such as Columbia Street belong to the city. Interstate 27, US 87, US 70, Texas State Highway 194 and the farm to market roads are state routes; work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Lubbock District. The utility owner, not the drilling contractor, files in TxDOT’s RULIS system. We prepare the bore plan and profile for that filing and work under the permit issued to the owner. A BNSF Railway crossing needs an agreement from the railroad, and a copy goes to TxDOT if the crossing also uses highway right of way. No named stream crossing is mapped in Plainview.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are near the Plainview Municipal Water System?

The Plainview Municipal Water System is locally owned and uses surface water. Public records for Plainview list 7,328 service connections and 21,104 people served, figures we consider when planning underground utility work. For a water route along Columbia Street, we hydrovac pothole marked lines on the bore path before drilling near them. Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative report electric service in Hale County. We confirm the line owner for the specific location before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Plainview Municipal Water SystemPublic water systemSurface water7,328 connections, 21,104 people served
Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Hale CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Plainview’s American Community Survey 2019 to 2023 five year estimates give a median housing year of 1968, context we use when planning underground work. They estimate 26 percent of housing was built before 1960, 65 percent from 1960 to 1999 and 9 percent in 2000 or later. That mix can mean a Columbia Street job is replacing older service or extending a newer one. We expose marked utilities with hydrovac potholing before the drill approaches; paint shows a line’s position, not its depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Plainview from Hale Center and our Yukon yard?

Plainview is in Hale County, covers 13.89 square miles and sits at an elevation of 3,385 feet. ZIP code 79072 serves the city, which is the county seat. Seth Ward is 2.4 miles northeast; Hale Center is 11.1 miles southwest; Edmonson is 11.6 miles northwest; Kress is 12.2 miles north; and Lockney is 16.7 miles east. Lubbock, the nearest larger city, is 44.5 miles south. Plainview is 331 road miles and a 6.1 hour drive from our Yukon, Oklahoma main office, a distance that affects mobilization for a Columbia Street or Interstate 27 project.

Places near Plainview

What would we bore near 5th Street in Plainview?

  • Highway crossing: We plan a bore beneath Interstate 27 or US 87 to avoid cutting existing pavement, with the utility owner handling the TxDOT permit.
  • Rail crossing: A route under BNSF Railway needs the railroad’s crossing agreement, with the crossing design coordinated before drilling.
  • Water service: A connection near the Plainview Municipal Water System calls for locating and exposing marked utilities along the proposed route.
  • Street connection: A bore near Columbia Street or 5th Street can keep pavement intact while pits sit on either side of the crossing.
  • Campus conduit: A fiber or electric conduit route near Wayland Baptist University needs a path and utility checks matched to the site.
  • Drainage crossing: Where a route meets one of Plainview’s mapped unnamed drainage areas, we plan the alignment around the channel and the access points.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Plainview quote near Interstate 27?

Send the map pin or address first. A point near Interstate 27 can have a different crossing, access and utility layout than one on Columbia Street. We also need to know what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the route and locate the pits.

The scope sets the price. Pullman clay loam can affect fluid use and reaming; a BNSF Railway or Interstate 27 crossing adds coordination and crossing work. Length, pipe size, exposed utilities, pavement, drainage crossings, pits, excavator time and sand backfill all matter. Mobilization is also part of the picture because Plainview is 331 road miles from Yukon. High profile or emergency work can change the planning needs.

Questions people ask about boring in Plainview

Does Trinity Boring Solutions take jobs in Hale County near Plainview, and who staffs them?

Yes. We take directional boring work in Hale County and keep Trinity as the customer’s contact from planning through the bore log. Our own crews or a partner drilling contractor Trinity has vetted may run the rig. That staffing model gives a Plainview project one point of contact without implying a local office.

What ground should I expect for a Plainview bore through Pullman soil?

Pullman soil is the largest mapped series in Plainview, covering 62 percent of the city. The USDA soil survey maps clay loam across 83 percent of the area at about 40 inches down, with clay across another 16 percent. Sticky clay can build on a reamer, so we plan fluid and staged reaming for the route.

Will a Plainview directional bore hit rock?

Bedrock is not mapped in Plainview’s top five feet, but that does not rule out deeper rock. The geologic map shows Eolian sheet sand of Cenozoic age and Cenozoic sedimentary rocks of Paleocene age. We use those regional maps as planning context, not as a substitute for checking the actual route.

Who approves a bore under Interstate 27 in Plainview?

For work in Interstate 27 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Lubbock District reviews it. We prepare the bore plan and profile for the owner’s filing. Under existing highway pavement, TxDOT rules call for boring or tunneling rather than open trenching.

What does a directional boring crossing under BNSF Railway in Plainview require from us?

A crossing under BNSF Railway needs an agreement with the railroad that owns Plainview’s track. The agreement sets the crossing details, including casing, depth and flagging. If the line also occupies highway right of way, TxDOT asks for a copy. BNSF has 13.49 track miles inside the city.

Who runs Plainview’s public water system, and where does its water come from near a planned boring route?

The local government owns the Plainview Municipal Water System, which uses surface water. Public records show 7,328 service connections and 21,104 people served. Before a bore near Columbia Street, we locate and expose marked lines so the proposed route can be checked against water infrastructure.

How much 811 notice do I need for a Plainview bore near Columbia Street?

Texas811 needs the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If a Columbia Street start slips more than 14 days past the original notice, submit a new request. When marks are worn or moved in Plainview, we have them refreshed through Texas811 before continuing work.

How far is Plainview from Yukon, and does Lubbock change mobilization?

From our Yukon, Oklahoma main office, we plan around the 331 road miles and 6.1 hour drive to Plainview. Lubbock is 44.5 miles south of Plainview, but it does not change the Yukon road mileage used for mobilization planning. We account for that distance when scoping a Columbia Street or Interstate 27 job.

What affects the cost of a directional bore near Interstate 27 in Plainview?

The route and scope drive the price, including length, pipe size, Pullman clay loam, utilities to expose, pavement, pits and equipment time. An Interstate 27 or BNSF Railway crossing adds its own planning and coordination. Plainview’s 331 road miles from Yukon also affect mobilization. High profile or emergency work can change the job requirements.

Where the Plainview facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Plainview

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Plainview, Texas

Type the address of your job in Plainview. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Plainview

Same county: Abernathy · Petersburg. All counties: Texas county list.