trinityboringsolutions.com

Eden Texas Directional Boring: Kavett Soil, US 87 and Harden Branch

Quick Answer: In Eden, the USDA soil survey maps bedrock as the texture at about 40 inches below ground across 39% of the area, beneath clay loam and silty clay loam. Along US 87, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for utility crossings. Eden is 387 road miles from our Yukon, Oklahoma main office, so distance is part of planning work near Smith Street. Kavett soil can hold an open hole but stick to the reamer, so we plan staged passes and a ready pipe pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Eden bores at a glance

  • Incorporated city in Concho County, Texas. Population 2,120 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 387 miles, about 7.6 hours of driving.
  • Ground: Kavett soil is mapped on 34 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 39 percent of the area.
  • Highways inside the boundary: US 87, US 83 and FM 2402. State permit office: TxDOT San Angelo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Harden Branch.
  • Public water: City of Eden, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring along US 87 in Eden?

We take directional boring work in Eden, in Concho County, where the Census Bureau Vintage 2024 estimate puts the population at 2,120. For a water or sewer service near Smith Street, or electric conduit, gas or fiber along US 87, we can plan a bore that passes beneath the surface instead of opening a trench along the route.

Our main office is in Yukon, Oklahoma, and Eden work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965 and has done directional boring since 1982. That experience covers short service runs near Smith Street as well as longer utility work around US 87.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should we expect when drilling Eden’s Kavett soil?

The USDA soil survey lists Kavett as 34% of Eden’s mapped soil series, with Mereta at 23% and Nuvalde at 17%. At about 40 inches below the surface, the mapped texture is bedrock across 39% of the area; clay loam covers 25% and silty clay loam 21%. The survey also maps heavy clay in 30% of the area at that depth, with average clay content of 34%. No sandy area is mapped at 40 inches. These are mapped soil conditions, not readings from a bore on Smith Street.

USDA soil survey, inside the Eden city limitsWhat is mapped
Soil series mappedKavett 34 percent, Mereta 23 percent, Nuvalde 17 percent, Frio 11 percent and Cho 8 percent
Texture at the surfaceclay loam 29 percent, silty clay loam 24 percent and silty clay 20 percent
Texture about 40 inches downbedrock 39 percent, clay loam 25 percent and silty clay loam 21 percent
Engineering class about 40 inches downlean clay (CL) 59 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches39 percent of the area (39 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel52 percent of the area

The USDA soil survey maps bedrock within 60 inches across 39% of Eden, with a typical depth of 21 inches, so a route near US 87 may meet hard material early. A seasonal water table within 60 inches is not mapped, but flood prone soils cover 11% of the area near Harden Branch, where depth and pit placement need care. High steel corrosion risk is mapped across 52%, a consideration for steel casing and tracer wire; HDPE does not share that concern. The geologic map names Holocene alluvial sand, silt, clay, and gravel, and Albian Edwards limestone, so material can change along a bore.

How do we bore Eden ground where bedrock is mapped?

We use the route, soil information and utility marks to set the bore plan. Near Eden streets such as Broadway Street, each marked line on the path is exposed before the drill gets close.

  1. Where Kavett soil is clayey, we use a thinner drilling fluid with polymer and ream in stages so sticky material does not build up on the reamer.
  2. Because heavy clay is mapped across 30% of Eden at 40 inches, we watch fluid returns and keep pressure controlled near pavement on Broadway Street.
  3. Where the survey maps bedrock near the surface, including routes toward US 87, we allow for slower drilling and a rock cutting setup if conditions call for it.
  4. At Harden Branch, we plan the bore below the channel, check crossing jurisdiction, pothole marked utilities and track the drill head while logging depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which roads and creeks might a bore cross in Eden near Harden Branch?

US 87 and US 83 each run through Eden, along with FM 2402; no other highway is mapped within 1.5 miles outside the city limits. Broadway Street is the longest named street at 1.94 miles, followed by Main Street at 1.71 miles and Smith Street at 1.03 miles. The city has 35.53 public road centerline miles, so a route may involve more than a highway crossing. Directional boring can pass beneath these paved routes, with work pits placed in soil at either end.

CrossingTypeMapped extentWho has a say
US 87US highway2 roadway miles insideState highway office
US 83US highway1.7 roadway miles insideState highway office
FM 2402State highway1 roadway miles insideState highway office
Harden BranchStream1.74 channel miles insideChecked for Corps of Engineers jurisdiction
Kelly CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Brady CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Eden or within one mile outside its limits, and no street and rail crossing is mapped in the city. Harden Branch runs 1.74 channel miles within Eden, with three mapped street crossings of named streams. Kelly Creek lies 0.6 miles from the city limits and Brady Creek 0.8 miles away. No lake or pond is mapped within one mile. A bore near Harden Branch needs a planned path that stays below the channel and accounts for the crossing.

Who approves a bore along US 87 in Eden?

Eden is an incorporated city, so its city streets, including Main Street and Smith Street, belong to the city. For work in the right of way of US 87, US 83 or FM 2402, TxDOT reviews the utility permit through its San Angelo District. The utility owner, not Trinity, submits the application in TxDOT’s RULIS system; we provide the bore plan and profile and work under the owner’s permit. TxDOT cover rules call for 60 inches at highway crossings for electric, communication and water lines, and 60 inches for pressurized sewer. Along the right of way, the listed cover is 48 inches for electric and communication, and 36 inches for water. Harden Branch crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the water and electric lines in Concho County near Eden?

The City of Eden public water system serves 2,120 people through 614 service connections and draws water from groundwater wells. For a water bore near Broadway Street, the well source and local system make the owner a useful first point of coordination. Utilities reporting electric service in Concho County include AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric Cooperative. We confirm the line owner for the specific address before planning electric conduit.

Line ownerWhat it isSourceSize
City of EdenPublic water systemGroundwater wells614 connections, 2,120 people served
AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric CooperativeElectric utilities reporting service in Concho CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Eden’s median housing year at 1958; 53% of homes were built before 1960, while 9% date to 2000 or later. That age mix can mean a Main Street project is replacing older service lines, while newer construction may need a new connection. Before drilling near either, we hydrovac pothole each marked utility on the path because locate marks show position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Eden and how far is San Angelo?

Eden is an incorporated city in Concho County, at an elevation of 2,052 feet and covering 2.38 square miles. ZIP code 76837 serves the city. Nearby places include Melvin, 15.6 miles east, Paint Rock, 20.9 miles north, and Menard, 20.9 miles south. Paint Rock is the county seat; San Angelo is 39.0 miles northwest and is the nearest larger city. From our Yukon, Oklahoma yard, Eden is 387 road miles away, or a 7.6 hour drive, which figures into mobilization for work near US 87.

Places near Eden

What kinds of bores come up in Eden around Smith Street?

  • Highway crossing: A bore beneath US 87 can keep a new water or communication line out of the paved travel lanes.
  • Water service: A connection near Smith Street can pass below the street, with the City of Eden system owner confirmed for the route.
  • Fiber conduit: A run along Broadway Street can use a bore to avoid an open trench through pavement and driveways.
  • Creek crossing: A utility route at Harden Branch needs depth planned below the channel and a check for federal jurisdiction during planning.
  • Sewer line: A bore near Main Street can carry a pressurized sewer line beneath the road with the required highway cover if it reaches US 83.
  • Electric conduit: Near FM 2402, the line owner is confirmed first so the conduit plan matches the utility and the road right of way.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Broadway Street in Eden?

For a Broadway Street estimate, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help us lay out the route. Tell us whether the path crosses pavement, a marked utility or Harden Branch so we can review the site details before setting the scope.

Price follows the work planned, not just the footage. Eden is 387 road miles from Yukon, so mobilization matters; Kavett clay and the mapped bedrock can affect tooling and reaming time. A crossing of US 87 or Harden Branch adds route and planning details, while marked utilities, pavement, pits, excavator time and sand backfill can change the work. Pipe size, crossing count and urgent or high profile scheduling also affect the scope.

Questions people ask about boring in Eden

Does Trinity take directional boring work in Concho County near Eden?

Yes. We take work in Eden and across Texas, and Trinity manages the job from the first call through the bore log. Our own crews and satellite yards run by vetted partner drilling contractors handle the work. For a route near US 87, we plan the crew and equipment around the bore scope.

Which electric company serves my Eden address in Concho County, and who confirms conduit specs?

The provider depends on the address. AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric Cooperative report service in Concho County. Before a conduit bore near Broadway Street, we confirm the line owner and have that owner verify the conduit requirements.

Does Eden or the county control Smith Street, and can we bore under it?

Eden is incorporated, so Smith Street is a city street rather than a county street. Directional boring can pass beneath it without cutting a trench through the paved route. The bore still needs entry and exit pits, and we locate and expose marked utilities on the path first.

Do older lines near Eden’s Main Street usually need replacement bores?

The American Community Survey 2019 to 2023 estimates put Eden’s median housing year at 1958, with 53% of homes built before 1960. That age can make replacement of an existing service relevant near Main Street, but the actual line and route need checking. We pothole marked utilities before drilling nearby.

Can groundwater or flood prone ground affect bore pits near Harden Branch in Eden?

A seasonal water table within 60 inches is not mapped in Eden, but flood prone soils cover 11% of the area. Harden Branch runs through the city, so we account for channel depth and ground conditions when placing pits and planning the bore. Creek crossings are checked for jurisdiction during planning.

Can Eden’s Kavett soil corrode steel, and what pipe should I use?

High steel corrosion risk is mapped across 52% of Eden, including areas with Kavett soil. That matters for uncoated steel casing or tracer wire, while HDPE is not affected by this soil corrosion concern. The line owner selects any needed coating, and the pipe choice should match the line and project requirements.

Can I reach Trinity after hours about an urgent bore on Eden’s Smith Street?

Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent job near Smith Street, tell us what line is involved and where the work is planned so we can understand the situation and discuss the next steps.

How early should I call Texas811 before a bore near Eden’s Broadway Street?

Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes that as at least two working days. If a Broadway Street start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore under US 87 in Eden?

The job scope sets the price: bore length, pipe or conduit size, soil and rock, and the number of utilities to expose all matter. A US 87 crossing can add highway planning, while Eden’s mapped bedrock and 387 road miles from Yukon affect drilling and mobilization. Pavement, pits, creek crossings and urgent scheduling can also change the work.

Where the Eden facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Eden

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Eden, Texas

Type the address of your job in Eden. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Eden

All counties: Texas county list.