trinityboringsolutions.com

Melvin Texas Directional Boring: Mereta Clay Loam, Brady Creek, US 87

Quick Answer: Mereta clay loam is common in Melvin, and sticky cuttings can build on the reamer. Along Brady Creek, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Melvin, Texas. Melvin is 404 road miles from the Yukon yard, so mobilization matters for a Hackberry Street crossing. Clay loam can swell and grip pipe, so we plan staged reaming and pull pipe promptly on Mereta ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Melvin bores at a glance

  • Incorporated city in McCulloch County, Texas. Population 121 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 404 miles, about 8 hours of driving.
  • Ground: Mereta soil is mapped on 41 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 7 percent of the area.
  • Highways inside the boundary: US 87 and FM 2028. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Brady Creek.
  • Public water: City of Melvin, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Brady Creek in Melvin?

Melvin’s clay loam can stick to a reamer and grip pipe, so we plan the bore around that ground. Trinity Boring Solutions takes directional boring work in Melvin, McCulloch County, where the Census Bureau Vintage 2024 estimate puts the population at 121. We install water, sewer, gas, electric conduit and fiber along routes such as Hackberry Street and FM 2028, with the bore path set for the line and site.

Our main office is in Yukon, Oklahoma, and Melvin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. From a 3/4 inch service line near Mesquite Street to 48 inch casing beneath US 87, our work spans 10 feet to 5,000 feet. Our directional boring experience since 1982 supports planning crossings on FM 2028, backed by a family business founded in 1965.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Melvin’s Mereta soil?

The USDA soil survey maps Mereta as Melvin’s largest soil series, covering 41 percent of the town. Mereta clay loam map units account for 24 percent at 1 to 3 percent slopes and 16 percent at 0 to 2 percent slopes. At about 40 inches, clay loam covers 46 percent of the mapped area and silty clay loam another 35 percent. Average clay content at that depth is 34 percent. These are mapped patterns, not test borings, so the exact ground under a Hackberry Street bore still needs to be checked.

USDA soil survey, inside the Melvin city limitsWhat is mapped
Soil series mappedMereta 41 percent, Nuvalde 28 percent, Cho 13 percent, Rowena 6 percent and Owens 6 percent
Texture at the surfaceclay loam 80 percent, gravelly loam 14 percent and stony clay 6 percent
Texture about 40 inches downclay loam 46 percent, silty clay loam 35 percent and gravelly loam 13 percent
Engineering class about 40 inches downlean clay (CL) 80 percent, clayey gravel (GC) 13 percent and fat clay (CH) 6 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches7 percent of the area (0 percent hard rock, 7 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel42 percent of the area

The USDA soil survey maps bedrock within 60 inches across 7 percent of Melvin, with weathered bedrock mapped in that same share and no hard bedrock mapped in that depth range. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 2 percent and high steel corrosion risk covers 42 percent. Terrace deposits of sand, silt, clay and gravel are mapped, along with Early Cretaceous sedimentary rock. Clay may cling to tooling; the corrosion rating calls for material choices on steel casing or tracer wire.

How do we drill Melvin’s clay loam?

For a Melvin bore through Mereta clay loam, we manage sticky cuttings and pipe grip with controlled fluid and staged reaming. The mapped ground guides the plan, but the actual route still matters.

  1. On Mereta clay loam near Hackberry Street, we use thinner drilling fluid with polymer and open the hole in stages to limit sticky buildup.
  2. Because Melvin’s mapped clay can swell and grip pipe, we plan to pull the line promptly after the final ream rather than leave the hole open.
  3. Where terrace deposits include gravel along a Brady Creek route, we check drill depth and pitch at each rod to keep the head on line.
  4. Before drilling near a marked line on Mesquite Street, we hydrovac pothole it; surface marks show where it runs, not how deep it sits.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What might a Melvin bore cross near Hackberry Street?

Melvin’s mapped roads include US 87 and FM 2028, so a route crossing either highway needs a plan for pavement and right of way. Hackberry Street is the longest named street at 0.69 miles, followed by Mesquite Street at 0.68 miles and Noyes Avenue at 0.6 miles. Beach Street also runs 0.6 miles within town. A bore can pass beneath pavement, driveways or sidewalks without cutting across the surface, but the route and utility marks determine the entry and exit points.

CrossingTypeMapped extentWho has a say
US 87US highway0.3 roadway miles insideState highway office
FM 2028State highway1.8 roadway miles insideState highway office
Brady CreekStream0.25 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Public records show no railroad inside Melvin or within one mile outside its limits, and no mapped street and rail crossing. Brady Creek runs 0.25 channel miles through town, with two mapped street crossings of named streams. A creek route needs depth planning beneath the channel, and its jurisdiction is checked during planning. No lake or pond is mapped within one mile of Melvin.

Do I need a permit for a Melvin bore under US 87?

A bore in US 87 or FM 2028 right of way needs a TxDOT utility permit reviewed by the TxDOT Brownwood District. For electric and communication lines crossing US 87, the cover is at least 60 inches below the lowest crossed grade; water crossings also need 60 inches, while water running along the right of way needs 36 inches. Pressurized sewer crossings need 60 inches. The utility owner files through TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. Existing highway pavement is bored or tunneled beneath, and a rural crossing extends under all travel lanes. We treat Hackberry Street as a city street because Melvin’s streets belong to the city. A Brady Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Melvin system?

The City of Melvin public water system uses groundwater wells and reports 130 service connections serving 300 people. That makes the water line owner important to confirm before a bore near FM 2028 or a connection to the system. A city owned electric system is not identified in the records. AEP Texas North, Oncor Electric Delivery Company and Central Texas Electric Cooperative report electric service in McCulloch County, so we confirm the line owner for the specific route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of MelvinPublic water systemGroundwater wells130 connections, 300 people served
AEP Texas North, Oncor Electric Delivery Company and Central Texas Electric CooperativeElectric utilities reporting service in McCulloch CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Melvin’s median housing year at 1942; 89 percent of homes were built before 1960, and none were built in 2000 or later. That age makes replacement work near Beach Street as relevant as new service. Before a drill approaches a marked line, we use hydrovac potholing to expose it; paint shows position, not depth. Older water, electric or communication lines can sit in the path.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Melvin in relation to Brady?

Melvin is an incorporated town in McCulloch County, at an elevation of 1,837 feet and covering 0.46 square miles. Its ZIP code is 76858. Brady is 15.1 miles southeast and is also the county seat; Eden is 15.6 miles west. Rochelle lies 22.2 miles east, and Menard is 22.8 miles southwest. From Trinity’s Yukon, Oklahoma main office, Melvin is 404 road miles away, an 8.0 hour drive. That distance affects mobilization for work on US 87 or a local service route.

Places near Melvin

Which Melvin jobs call for a bore near Mesquite Street?

  • Water service: A small service bore near the City of Melvin system can connect a property without opening the full route along FM 2028.
  • Highway crossing: A utility route beneath US 87 needs a TxDOT plan for cover, casing and the full width of rural travel lanes.
  • Fiber conduit: A conduit bore along Hackberry Street can pass beneath pavement while avoiding open cuts across the street.
  • Creek crossing: A Brady Creek bore needs a planned path below the channel and a jurisdiction check during planning.
  • Street replacement: A water or sewer line near Beach Street can be bored around marked utilities before the drill approaches them.
  • Electric conduit: For a route near Mesquite Street, we confirm the line owner before planning the conduit bore.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Melvin bore near Beach Street?

For a Melvin quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. The ground near Beach Street matters because Mereta clay loam can cling to the reamer and grip pipe. Show any creek crossing or pavement on the route so we can plan the bore path.

Mereta clay loam and the mapped gravel in Melvin matter first because they affect reaming and hole stability. The number of marked utilities to expose, pipe or conduit size, bore length, and pavement or concrete also shape the work. A route under US 87 brings highway permit and cover requirements into the plan; a Brady Creek crossing adds depth and jurisdiction checks. Pits, excavator time, sand backfill and mobilization from Yukon can also change the scope.

Questions people ask about boring in Melvin

Does Trinity take directional boring work in Melvin and McCulloch County, and who staffs it?

Trinity Boring Solutions takes directional boring work in Melvin, McCulloch County, with work handled by our own crews or vetted partner contractors. We stay your point of contact from the first call through the bore log. For a route on Hackberry Street, the crew plan depends on the scope and mobilization.

What ground should I expect for a Melvin bore through Mereta soil?

Melvin’s USDA soil survey maps Mereta as 41 percent of the town, and clay loam and silty clay loam make up most of the mapped texture at about 40 inches. Average clay content there is 34 percent. That ground can stick to tooling, so we plan fluid and reaming around the route, including near Mesquite Street.

Is there rock under Melvin, and how much is mapped within five feet?

The USDA soil survey maps bedrock within 60 inches across 7 percent of Melvin, and the mapped bedrock there is weathered rather than hard. That does not describe every point below Noyes Avenue or elsewhere in town. Actual conditions can vary along the bore route, so the mapped depth is a planning guide rather than a site test.

Who approves a Melvin bore beneath US 87?

TxDOT reviews a utility permit for work in US 87 right of way through the Brownwood District. The utility owner submits the application in TxDOT’s RULIS system, while we provide the bore plan and profile. Cover and pavement details for a US 87 crossing are set out in the permit plan.

Can a Melvin utility line be bored beneath Brady Creek?

A bore can be planned beneath Brady Creek, which runs 0.25 channel miles through Melvin and has two mapped street crossings of named streams. The route needs depth planning under the channel, and its jurisdiction is checked during planning. The actual path and access determine the bore setup.

Who operates Melvin’s water system, and where does its water come from?

The City of Melvin owns the public water system, which uses groundwater wells. Records list 130 service connections serving 300 people. For a connection near FM 2028, we confirm the existing line location and owner before setting a bore path.

How far is Melvin from the Yukon office, and does that affect a bore?

Melvin is 404 road miles and an 8.0 hour drive from Trinity’s Yukon, Oklahoma main office. That distance can affect mobilization for work on US 87, Brady Creek or a local street. The route, equipment and scope help determine how the job is staffed.

How early should I request Texas811 marks for a Melvin bore on Hackberry Street?

For a bore on Hackberry Street, request a Texas811 locate at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a US 87 permit through the TxDOT Brownwood District, we submit a new request if the start slips more than 14 days past the original notice. Before continuing a crossing near Brady Creek, we refresh any worn or moved marks through Texas811.

What affects the price of directional boring in Melvin under US 87?

The route and scope determine the price, with Mereta clay loam, bore length and pipe size among the main factors. A US 87 crossing brings permit planning and cover into the work; marked utilities, pavement, creek crossings, pits and excavator time also matter. Mobilization from Yukon is another part of a Melvin job.

Where the Melvin facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Melvin

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Melvin, Texas

Type the address of your job in Melvin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Melvin

All counties: Texas county list.