trinityboringsolutions.com

Angleton Texas Directional Boring: Bernard Clay, Union Pacific and Brushy Bayou

Quick Answer: What does the USDA soil survey show in Angleton’s top five feet? We take directional boring, also called horizontal directional drilling (HDD), work in Texas for routes beneath Union Pacific tracks in Angleton. The Yukon, Oklahoma main office is 500 road miles from Texas State Highway 288, affecting mobilization. At about 40 inches, 96 percent of Angleton maps as clay; sticky ground can load a reamer and grip pipe. Bedrock is not mapped in Angleton’s top five feet.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Angleton bores at a glance

  • County seat of Brazoria County, Texas. Population 20,979 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 500 miles, about 9.8 hours of driving.
  • Ground: Bernard soil is mapped on 44 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 288, Texas State Highway 288 Business, Texas State Highway 35, FM 523 and FM 521. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: Union Pacific, with 14 mapped street and rail crossings.
  • Named streams inside the boundary: Brushy Bayou and Bastrop Bayou.
  • Public water: City of Angleton, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Angleton near Union Pacific tracks?

What does the USDA soil survey show in Angleton’s top five feet, and what is under it? The survey maps clay at about 40 inches, while bedrock is not mapped in the top five feet. Angleton is in Brazoria County, with 20,979 people in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber along Velasco Street or beneath Texas State Highway 288, depending on the route.

Our main office is in Yukon, Oklahoma, and Angleton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. An Angleton job may instead be a service line or a crossing beneath Front Street. The family business began in 1965 and has done directional boring since 1982.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Bernard soil survey show beneath Angleton?

The USDA soil survey maps Bernard soil across 44 percent of Angleton, Lake Charles across 35 percent, and Edna across 14 percent. Leton accounts for 3 percent. At about 40 inches below the surface, 96 percent of the mapped area has clay texture, and average clay content at that depth is 50 percent. Surface texture is mapped as clay loam across 44 percent and clay across 35 percent. This is sticky ground: clay can ball up on a reamer, swell around pipe and hold an open hole.

USDA soil survey, inside the Angleton city limitsWhat is mapped
Soil series mappedBernard 44 percent, Lake Charles 35 percent, Edna 14 percent and Leton 3 percent
Texture at the surfaceclay loam 44 percent, clay 35 percent and loam 11 percent
Texture about 40 inches downclay 96 percent and clay loam 3 percent
Engineering class about 40 inches downfat clay (CH) 96 percent and lean clay (CL) 3 percent
Average clay content about 40 inches down50 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches65 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The USDA map places no bedrock within the top five feet of Angleton, which does not rule out deeper rock. A seasonal water table is mapped within 40 inches across 65 percent of the area, so pits may need pumping. Flood prone soils account for 3 percent. High steel corrosion risk is mapped across 99 percent, so the line owner should address casing and tracer wire coatings. The Pleistocene Beaumont Formation is mapped as predominantly sand with silt and clayey deposits, which can mean ground conditions vary along a bore.

How do we drill Angleton clay without opening the pavement?

Angleton’s clay at 40 inches calls for control of fluid, reaming and pipe timing. On routes near Texas State Highway 288, we also watch returns so pressure does not lift pavement.

  1. With clay mapped across 96 percent of Angleton at about 40 inches, we use thinner fluid with polymer and ream in stages to manage sticky cuttings.
  2. Heavy clay can grip pipe on a route near Texas State Highway 288, so we monitor fluid returns and pull pipe the day the final hole is opened.
  3. A seasonal water table within 40 inches across 65 percent of Angleton can fill pits, so we keep pits small and pump as needed near Brushy Bayou.
  4. Before drilling near Velasco Street, we hydrovac pothole marked utilities, then track the drill head with a walkover locator and log depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What could an Angleton bore cross near Brushy Bayou?

Texas State Highway 288 has 12.0 mapped roadway miles in Angleton. Texas State Highway 288 Business adds 9.2 miles, and Texas State Highway 35 adds 5.4. FM 523 and FM 521 also pass through the city. Velasco Street is the longest named street at 7.82 miles, followed by Mulberry Street at 5.16 and Front Street at 4.54. Those routes can put a bore near pavement, driveways and existing utilities, so the planned path matters.

CrossingTypeMapped extentWho has a say
Texas State Highway 288State highway12 roadway miles insideState highway office
Texas State Highway 288 BusinessState highway9.2 roadway miles insideState highway office
Texas State Highway 35State highway5.4 roadway miles insideState highway office
FM 523State highway3.5 roadway miles insideState highway office
FM 521State highway0.3 roadway miles insideState highway office
Union PacificRailroad5.71 track miles insideThe railroad
Brushy BayouStream3.4 channel miles insideChecked for Corps of Engineers jurisdiction
Bastrop BayouStream2.55 channel miles insideChecked for Corps of Engineers jurisdiction
Tigner-Farrer ReservoirLake or pond217 acres, nearbyChecked for Corps of Engineers jurisdiction
Congo LokoLake or pond136 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 5.71 track miles in Angleton, with 14 mapped street and rail crossings in the city. A route that crosses its tracks needs an agreement with the railroad. Brushy Bayou runs 3.4 channel miles in the city, and Bastrop Bayou runs 2.55; mapped streets cross named streams at 19 locations. Tigner-Farrer Reservoir and Congo Loko are within one mile, outside the city limits. A water crossing needs a jurisdiction check during planning.

Who approves work in Angleton near Texas State Highway 288?

The line owner, not the driller, files for a TxDOT utility permit when work uses the right of way of Texas State Highway 288, Texas State Highway 35 or another state highway. The Houston District reviews the filing in RULIS, and we give the utility owner the bore plan and profile. At highway crossings, electric and communication lines need 60 inches of cover and water lines need 60 inches; pressurized sewer also needs 60 inches. TxDOT requires boring or tunneling beneath existing highway pavement. Angleton’s Front Street is under city control, while a Union Pacific crossing needs the railroad’s agreement. Brushy Bayou crossings are checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What utilities already serve Angleton in Brazoria County?

The City of Angleton public water system uses purchased surface water and reports 9,932 service connections serving 19,429 people. In Brazoria County, CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative report electric service. Those providers do not establish which line serves every address, so we confirm the owner before planning an electric conduit bore along Mulberry Street.

Line ownerWhat it isSourceSize
City of AngletonPublic water systemSurface water bought from another system9,932 connections, 19,429 people served
CenterPoint Energy, Texas-New Mexico Power and Jackson Electric CooperativeElectric utilities reporting service in Brazoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Angleton’s median housing year at 1978, so we plan underground work with existing properties in mind. Of housing units, 22 percent were built before 1960, 62 percent from 1960 to 1999, and 16 percent in 2000 or later. That mix can mean replacement work as well as new services, but age alone does not identify buried lines. We hydrovac pothole every marked utility before drilling near it. For a route under Mulberry Street, we expose the marked lines first because paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where does Angleton sit in relation to Pearland?

Angleton is the Brazoria County seat, at an elevation of 29 feet and covering 11.73 square miles. Its ZIP code is 77515. Bailey’s Prairie is 4.6 miles west, Holiday Lakes is 5.7 miles northwest, Danbury is 6.3 miles northeast, Richwood is 7.6 miles south, and Lake Jackson is 8.5 miles south. Pearland, the nearest larger city, is 27.3 miles north. The Yukon yard is 500 road miles away, a 9.8 hour drive, which affects mobilization for Velasco Street work.

Places near Angleton

What boring work comes up on Angleton’s Velasco Street?

  • Highway crossing: A bore beneath Texas State Highway 288 needs a planned path under the pavement and the required highway cover.
  • Rail crossing: A route under Union Pacific track needs an agreement with the railroad that owns the Angleton track.
  • Creek crossing: A bore at Brushy Bayou needs a depth plan under the channel and a jurisdiction check during planning.
  • Water service: A service route near the City of Angleton water system can carry a line toward a home along Front Street.
  • Fiber route: A fiber bore along Velasco Street can avoid opening pavement while the marked utilities are exposed first.
  • Street replacement: A replacement line beneath Mulberry Street needs verified utility locations because housing age does not show buried line depth.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for an Angleton quote near Union Pacific?

A map pin on Front Street matters because a route beside the road is a different scope from a crossing beneath it. For Angleton boring work, send us the address or pin, material going underground, pipe or conduit size, and footage. A sketch or plans help us assess the route near Union Pacific tracks or Brushy Bayou.

In Angleton, soil is a major cost factor because clay mapped at 40 inches can affect fluid, reaming and pipe handling. Price also reflects bore length, pipe size, utilities to expose, pavement, pits and excavator time. A Brushy Bayou crossing or a route beneath Texas State Highway 288 can add planning and access needs. The 500 road miles from Yukon shape how we plan mobilization for boring work in Angleton. High profile or emergency work changes the scope.

Questions people ask about boring in Angleton

Does Trinity take directional boring jobs in Brazoria County’s Angleton, and who does the work?

Yes. Trinity takes directional boring work in Angleton, and our main office is in Yukon, Oklahoma. Our own crews and partner drilling contractors from vetted satellite yards staff the work. You work with Trinity from the first call through the bore log, whether the route follows Velasco Street or crosses another local feature.

Can a line be bored under Brushy Bayou in Angleton?

A bore under Brushy Bayou can be planned, but the route, ground and access need review first. The bayou runs 3.4 channel miles in Angleton. During planning, we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction and plan the bore depth to pass beneath the channel.

Who runs Angleton’s public water system, and does it use purchased surface water that we should account for in our plans?

The City of Angleton owns its public water system and uses purchased surface water, which we account for when planning underground work. The system reports 9,932 service connections and serves 19,429 people. For a new service or replacement route near Front Street, the system’s location helps identify the water line owner before the bore is planned.

Which electric companies report service in Brazoria County’s Angleton, and who confirms conduit specs?

CenterPoint Energy, Texas New Mexico Power and Jackson Electric Cooperative report electric service in Brazoria County, so we plan boring with utility coordination in mind. That does not identify the provider at every Angleton address. The line owner must be confirmed before conduit planning, including a route along Mulberry Street, so the correct conduit specifications can be used.

Who controls Front Street in Angleton, and does a bore require cutting it?

Front Street is under city control because it is within incorporated Angleton. Directional boring can pass beneath pavement without cutting the street when the route and conditions allow. We still need the planned path and marked utility locations before setting pits or deciding how the crossing should be built.

How old are homes and buried lines near Mulberry Street in Angleton?

The American Community Survey 2019 to 2023 estimates put Angleton’s median housing year at 1978; 22 percent of units were built before 1960. Those figures do not date a buried line on Mulberry Street. For replacement work, we expose marked utilities with hydrovac potholing before drilling near them.

How far is Angleton from Yukon, and does Pearland affect a bore’s cost?

Angleton is 500 road miles and a 9.8 hour drive from Trinity’s Yukon yard. Pearland is 27.3 miles north and is the nearest larger city, but the job location in Angleton sets the route. Distance from Yukon can affect mobilization, especially for a crossing near Texas State Highway 288.

How much 811 notice is needed for a bore on Velasco Street in Angleton?

The person arranging a Velasco Street bore requests locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the original notice, submit a new notice. Before we continue Angleton work, we have worn or moved marks refreshed so the route remains clear.

What affects the cost of a directional bore near Texas State Highway 288 in Angleton?

The job scope sets the cost. Angleton’s clay, bore length and pipe size matter, along with utilities to expose, pavement, pits and equipment time. A route beneath Texas State Highway 288 or across Brushy Bayou brings its own crossing and access considerations. The 500 road miles from Yukon shape how we plan mobilization for boring work in Angleton.

Where the Angleton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Angleton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Angleton, Texas

Type the address of your job in Angleton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Angleton

Same county: Alvin · Manvel · Iowa Colony · Clute · Freeport · West Columbia · Sweeny · Brazoria · Wild Peach Village · Jones Creek · Brookside Village · Oyster Creek. All counties: Texas county list.