trinityboringsolutions.com

Oyster Creek Texas Directional Boring: Asa Soil, FM 523 and Oyster Creek

Quick Answer: Oyster Creek runs 1.43 channel miles inside the city, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines planned beneath the channel. The Yukon main office is 519 road miles away, a distance we account for on a Levee Road job. USDA maps show heavy clay, which can stick to a reamer and grip pipe. FM 523 needs a right of way plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Oyster Creek bores at a glance

  • Incorporated city in Brazoria County, Texas. Population 1,234 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 519 miles, about 10.2 hours of driving.
  • Ground: Asa soil is mapped on 30 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 523. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Oyster Creek.
  • Public water: City of Oyster Creek, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Oyster Creek and Union Pacific?

Union Pacific track lies close to Oyster Creek, where Trinity Boring Solutions takes work in Brazoria County. The Census Bureau Vintage 2024 estimate puts the city population at 1,234. We install water, sewer, gas, electric conduit and fiber lines; a proposed run along Levee Road or Oyster Creek Bend can carry a service or a longer utility connection, depending on the job.

Our main office is in Yukon, Oklahoma, and Oyster Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a 3/4 inch service line near Oyster Creek Bend or a 48 inch casing planned beneath FM 523, the size changes the equipment and bore plan. We are a family business that started in 1965, with directional boring work dating to 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Asa soil mean for Oyster Creek?

The USDA soil survey maps Asa soil across 30 percent of Oyster Creek, with Surfside at 24 percent and Brazoria at 20 percent. At about 40 inches below the surface, clay is mapped in 56 percent of the area, and heavy clay is mapped in 86 percent. For Oyster Creek, we use mapped patterns as planning context, not as test borings for deciding underground crossing depth. Clay can hold an open hole, but it can also ball up on a reamer and swell around pipe. That makes staged reaming and a timely pull important on a Levee Road bore.

USDA soil survey, inside the Oyster Creek city limitsWhat is mapped
Soil series mappedAsa 30 percent, Surfside 24 percent, Brazoria 20 percent and Pledger 11 percent
Texture at the surfaceclay 56 percent, silty clay loam 23 percent and silt loam 8 percent
Texture about 40 inches downclay 56 percent and silty clay loam 30 percent
Engineering class about 40 inches downfat clay (CH) 56 percent and lean clay (CL) 32 percent
Average clay content about 40 inches down56 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches24 percent of the area
Flood prone soils25 percent of the area
High corrosion risk for uncoated steel56 percent of the area

Bedrock is not mapped in the top five feet of Oyster Creek, but that does not rule out deeper rock. Seasonal water tables are mapped within 60 inches in 24 percent of the area, so pits near Oyster Creek may need pumping. Flood prone soils cover 25 percent, which matters for a channel crossing. High steel corrosion risk is mapped in 56 percent of the area, so the line owner should weigh casing and tracer wire protection. The Holocene natural levee silt and clay unit includes silt and silty clay, a ground mix that calls for controlled fluid returns.

How do crews bore clay in Oyster Creek?

The mapped clay around Asa and Surfside soils can stay open, then cling to the reamer. At Oyster Creek, we plan the fluid, reaming sequence and pipe pull around those conditions.

  1. In Asa and Brazoria clay, we use a thinner fluid mix and polymer, then ream in stages so sticky cuttings do not pack onto the reamer.
  2. Because heavy clay is mapped around Oyster Creek, we watch fluid returns closely and keep pressure controlled near pavement such as FM 523.
  3. With seasonal water table areas near Oyster Creek, we keep pits compact and pump out water as needed before the work advances.
  4. Before drilling near Levee Road, we pothole each marked utility to confirm its depth; paint shows the route, not how deep the line sits.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where might a line pass beneath Oyster Creek?

FM 523 runs 4.6 mapped roadway miles within Oyster Creek, and Texas State Highway 332 runs along or touches the city limits. A bore on either route needs a plan for the road and its right of way. Levee Road is the longest named street in the city at 1.4 miles, followed by Duncan Drive at 1.24 miles and Oyster Creek Bend at 0.98 miles. Those street names help locate the proposed bore and its entry and exit pits.

CrossingTypeMapped extentWho has a say
FM 523State highway4.6 roadway miles insideState highway office
Texas State Highway 332Highway nearbyRuns along or touches the city limitsState highway office
Union PacificRailroad nearby0.1 miles outsideThe railroad
Oyster CreekStream1.43 channel miles insideChecked for Corps of Engineers jurisdiction
Ridge SloughStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Horse Shoe LakeLake or pond146 acres, insideChecked for Corps of Engineers jurisdiction
Chubb LakeLake or pond123 acres, nearbyChecked for Corps of Engineers jurisdiction
Dutch LakeLake or pond54 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad runs inside the city limits. Union Pacific track is 0.1 miles outside them, so a route that reaches the track needs coordination with its owner. Oyster Creek has 1.43 channel miles inside the city, while Ridge Slough is 0.3 miles outside. No mapped street crossing of a named stream is recorded inside the limits. Horse Shoe Lake and Dutch Lake are inside the city, so a nearby route may need a water crossing review.

Does FM 523 work in Oyster Creek need a permit?

FM 523 is a state highway, so work in its right of way needs a TxDOT utility permit reviewed by the Houston District. The utility owner submits the application through TxDOT RULIS; we prepare the bore plan and profile and work under the permit issued to that owner. Because Oyster Creek is incorporated, we plan city street crossings with the city’s ownership of those streets in mind. A crossing of Union Pacific track needs an agreement with the railroad, and a crossing of Oyster Creek is checked for federal waterway jurisdiction during planning. For a Levee Road excavation, Texas811 needs notice at least 48 hours ahead, excluding weekends and legal holidays, and no earlier than 14 days before work.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utility lines serve Oyster Creek in Brazoria County?

For Oyster Creek boring plans, we account for the City of Oyster Creek system serving 1,698 people through 566 service connections with purchased surface water. For electric service in Brazoria County, CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative report serving the county. The line owner needs to be identified before conduit specifications are set for a proposed bore near FM 523; service providers can vary by address.

Line ownerWhat it isSourceSize
City of Oyster CreekPublic water systemSurface water bought from another system566 connections, 1,698 people served
CenterPoint Energy, Texas-New Mexico Power and Jackson Electric CooperativeElectric utilities reporting service in Brazoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use Oyster Creek’s 1990 median housing year from American Community Survey 2019 to 2023 five year estimates as context, not a substitute for underground utility locating. The survey estimates 19 percent of homes were built before 1960 and 40 percent in 2000 or later. A Levee Road project could involve replacement work or a new service, so the proposed route matters. Before drilling near Oyster Creek Bend, we use hydrovac potholing to expose marked utilities and check their depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Oyster Creek and nearby Freeport?

Oyster Creek is in Brazoria County, covers 1.89 square miles and sits 4 feet above sea level. Its ZIP code is 77541. Freeport is 4.1 miles southwest, Surfside Beach is 4.2 miles southeast, and Clute is 4.6 miles northwest. Angleton, the county seat, is 13.4 miles northwest; Freeport is the nearest larger city. From the Yukon, Oklahoma main office, the road distance is 519 miles and the drive is 10.2 hours. That distance is part of planning work on FM 523 and nearby streets.

Places near Oyster Creek

What bores might run along Levee Road in Oyster Creek?

  • Water service: A smaller service bore near Oyster Creek Bend can connect a property without opening the whole street surface.
  • Highway crossing: A utility route beneath FM 523 needs a bore plan suited to the state highway right of way.
  • Fiber conduit: A conduit run along Levee Road can use staged reaming where the mapped clay clings to drilling tools.
  • Creek crossing: A line beneath Oyster Creek needs depth planning around the channel and a check for federal waterway jurisdiction.
  • Rail crossing: A proposed route reaching Union Pacific track needs the railroad owner’s crossing agreement before the bore proceeds.
  • Drainage work: A bore near Ridge Slough can be planned around the drainage and wet ground without cutting across its surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote an Oyster Creek bore near Union Pacific?

Start with an address or map pin, such as a proposed location on Levee Road. Tell us what will go in the ground, whether it is a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show how the route relates to FM 523, Oyster Creek or nearby utilities.

A short, direct service route near Oyster Creek Bend is simpler to plan than a long bore through heavy clay or across a drainage. Price depends on footage, pipe size, soil, exposed utilities, pavement, creek crossings, pits and excavator time. FM 523 right of way work adds coordination, and a route near the Union Pacific track may need crossing arrangements. With 519 road miles from Yukon, we include the stated travel distance in mobilization planning for Oyster Creek boring work. For Oyster Creek work in Brazoria County, we allow for high profile or emergency work to change the scope.

Questions people ask about boring in Oyster Creek

Does Trinity take directional boring jobs in Oyster Creek and Brazoria County?

Yes. We take directional boring work in Oyster Creek and across Texas. Our own crews and vetted partner contractor yards support the work, with Trinity handling the job from the first call through the bore log. A proposed route on Levee Road or FM 523 helps us plan the crew and equipment.

What does a bore under Union Pacific track near Oyster Creek require?

A route crossing Union Pacific track needs an agreement from the railroad that owns it. That agreement sets the crossing details, including casing, depth and flagging. The track is 0.1 miles outside Oyster Creek city limits, so send the route location with your plans before the bore is laid out.

Can a bore pass beneath Oyster Creek in Oyster Creek, Texas?

A bore beneath the Oyster Creek channel can be planned, but the route and depth need review before drilling. The channel runs 1.43 miles within the city, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. Site conditions and access determine the bore approach.

For Oyster Creek boring plans, who runs the public water system, and does it use purchased surface water?

We plan Oyster Creek crossings with the City of Oyster Creek’s ownership in mind, since its public water system uses purchased surface water. We account for Oyster Creek’s public water system serving 1,698 people through 566 service connections when planning underground work. For a proposed water line near Oyster Creek Bend, the system’s location helps establish where a new service or connection might meet existing infrastructure.

Which electric line owner should I ask about a conduit bore in Oyster Creek, Brazoria County?

We plan Oyster Creek boring coordination around electric service reported in Brazoria County by CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative. The specific line owner should be confirmed for the address before conduit specifications are set. That check matters for a proposed conduit route near FM 523 because countywide reporting does not identify the provider at every property.

Who controls Oyster Creek Bend, and does a bore there require cutting the street?

Because Oyster Creek is incorporated, we plan city street crossings with the city’s ownership of those streets in mind. Directional boring places the line below the street rather than cutting a trench through Oyster Creek Bend. Entry and exit pits still need suitable locations, and marked utilities along the route are exposed before drilling gets near them.

Does Trinity cover Freeport and rural sites outside Oyster Creek?

Yes. We take work in nearby Freeport and rural locations outside Oyster Creek city limits, as well as other parts of Texas. Freeport is 4.1 miles southwest of Oyster Creek. Send the site location and proposed route so we can account for access and the distance from our Yukon main office.

How much Texas811 notice does a Levee Road bore in Oyster Creek need?

Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, request a new ticket. Worn or moved marks near Levee Road must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near FM 523 in Oyster Creek?

The job scope sets the price: footage, pipe or conduit size, soil, exposed utilities, pavement, pits and drainage crossings all matter. Heavy clay mapped in Oyster Creek can affect reaming, while FM 523 adds state right of way coordination. Mobilization also reflects the 519 road miles from the Yukon main office.

Where the Oyster Creek facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Oyster Creek

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Oyster Creek, Texas

Type the address of your job in Oyster Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Oyster Creek

Same county: Pearland · Alvin · Lake Jackson · Angleton · Manvel · Iowa Colony · West Columbia · Sweeny · Brazoria · Wild Peach Village · Jones Creek · Danbury. All counties: Texas county list.