trinityboringsolutions.com

Clute Texas Directional Boring: Asa Soil, Texas State Highway 332 And Union Pacific

Quick Answer: The City of Clute water system and electric providers reported for Brazoria County make line ownership a first check before work near Brazosport Boulevard. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Clute crossings such as Texas State Highway 332. Clute is 512 road miles from our Yukon, Oklahoma main office, so a bore near Union Pacific track needs careful mobilization planning. Asa soil and heavy clay can grip the pipe, so we plan reaming and pullback around the ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Clute bores at a glance

  • Incorporated city in Brazoria County, Texas. Population 10,893 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 512 miles, about 10.1 hours of driving.
  • Ground: Asa soil is mapped on 30 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 332, Texas State Highway 288 Business, Texas State Highway 288 and FM 523. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: Union Pacific, with 7 mapped street and rail crossings.
  • Public water: City of Clute, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Clute, Brazoria County?

The City of Clute runs the public water system, while CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative report service in Brazoria County. We confirm the electric line owner before planning a conduit bore near Brazosport Boulevard. The Census Bureau Vintage 2024 estimate puts Clute at 10,893 people. We install water, sewer, gas, electric conduit and fiber along streets such as Plantation Drive or beneath Texas State Highway 332.

Our main office is in Yukon, Oklahoma, and Clute work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A typical Clute job is smaller, such as a service or utility crossing near Brazosport Boulevard. We are a family business started in 1965, with directional boring work since 1982 and no utility strike in over 25 years.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Clute soil like around Asa soil?

The USDA soil survey maps Asa as the leading soil series in Clute at 30 percent of the mapped area. Pledger accounts for 18 percent, and Brazoria for 12 percent. At the surface, clay is mapped under 50 percent of the city. About 40 inches down, clay is mapped under 62 percent and silty clay loam under 30 percent. The average clay content at that depth is 54 percent, and heavy clay is mapped under 79 percent. For Clute work, we treat soil survey patterns as planning context, not as test borings. Sticky clay can build on a reamer and grip the product pipe, so the bore plan should allow for staged reaming and a prompt pullback.

USDA soil survey, inside the Clute city limitsWhat is mapped
Soil series mappedAsa 30 percent, Pledger 18 percent, Brazoria 12 percent, Surfside 11 percent and Bernard 11 percent
Texture at the surfaceclay 50 percent, silt loam 23 percent and clay loam 11 percent
Texture about 40 inches downclay 62 percent and silty clay loam 30 percent
Engineering class about 40 inches downfat clay (CH) 62 percent and lean clay (CL) 31 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches25 percent of the area
Flood prone soils13 percent of the area
High corrosion risk for uncoated steel60 percent of the area

For Clute, bedrock is not mapped in the top five feet, which does not rule out rock deeper down. The USDA soil survey maps a seasonal water table within 60 inches under 25 percent of the area, so pits may need pumping. Flood prone soils account for 13 percent, a reason to plan channel depth carefully near the Lake Jackson-Clute Drng Canal. High steel corrosion risk is mapped under 60 percent, so the line owner should consider casing and tracer wire materials. The geologic map shows Holocene Alluvium, including sand, silt, clay and gravel, with variable thickness.

How do we bore through Clute clay?

Clute’s Asa and Pledger soils call for control of sticky cuttings and drilling fluid. We adjust the ream sequence to the ground and the crossing, whether the route follows Plantation Drive or approaches Texas State Highway 332.

  1. Clute maps heavy clay under 79 percent of its area at about 40 inches, so we use staged reaming and manage fluid returns to limit pressure under pavement.
  2. We hydrovac expose every marked utility before drilling near it; beneath Brazosport Boulevard, paint alone cannot establish a buried line’s depth.
  3. Asa soil can stick to the reamer and grip the pipe, so we use fluid suited to the clay and plan to pull the pipe the day the hole opens.
  4. With a seasonal water table mapped under 25 percent of Clute, we keep pits small and pump them as needed; the locator tracks the head and records depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What might a Clute bore cross near Brazosport Boulevard?

Texas State Highway 332, Texas State Highway 288 Business, Texas State Highway 288 and FM 523 all run through Clute. A bore beneath a state highway has to follow the TxDOT permit and cover requirements for the line being installed. Brazosport Boulevard is the longest named street in the city at 4.26 miles. Plantation Drive runs 1.84 miles, while Stratton Ridge Road and Old Angleton Road each run 1.71 miles. Their lengths and pavement help determine pit placement and the route a bore can take without cutting across the surface.

CrossingTypeMapped extentWho has a say
Texas State Highway 332State highway3.9 roadway miles insideState highway office
Texas State Highway 288 BusinessState highway3.7 roadway miles insideState highway office
Texas State Highway 288State highway4.3 roadway miles insideState highway office
FM 523State highway1.4 roadway miles insideState highway office
Union PacificRailroad4.46 track miles insideThe railroad
private or unidentified trackRailroad nearby0.4 miles outsideThe railroad
Lake Jackson-Clute Drng CanalStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Big SloughStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Velasco Drainage DitchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Magnolia CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Chubb LakeLake or pond123 acres, nearbyChecked for Corps of Engineers jurisdiction
Dutch LakeLake or pond54 acres, nearbyChecked for Corps of Engineers jurisdiction
Folley LakeLake or pond44 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 4.46 track miles in Clute on its Freeport Subdivision, and public mapping shows 7 street and rail crossings in the city. A crossing needs an agreement with Union Pacific that sets items such as casing, depth and flagging. No named streams are mapped inside the city limits. The Lake Jackson-Clute Drng Canal lies 0.2 miles outside them, while 0.36 miles of unnamed drainage are mapped inside. Bend Lake is within Clute, so a proposed water crossing needs jurisdiction checked during planning.

Who approves a Clute bore under Texas State Highway 332?

For a bore under Texas State Highway 332, the cover depth depends on the line: electric and communication lines need 60 inches below the lowest crossed grade, and water lines also need 60 inches at a crossing. Pressurized sewer lines need 60 inches there as well. TxDOT’s Houston District reviews the utility permit application in its online RULIS system. The utility owner, not our crew, files; we prepare the bore plan and profile and work under its permit. TxDOT requires boring or tunneling beneath existing highway pavement, with casing at crossings. City streets such as Brazosport Boulevard belong to Clute. A Union Pacific crossing needs the railroad’s agreement, and a water crossing near the Lake Jackson-Clute Drng Canal is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Clute for City of Clute?

For Clute boring plans, we account for the City of Clute public water system serving 10,604 people through 5,446 service connections and using purchased surface water. That gives a water line owner to identify before laying out a new service or crossing near Plantation Drive. For boring work in Brazoria County, we account for electric service reports from CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative. We confirm which owner has the line at the specific Clute address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of ClutePublic water systemSurface water bought from another system5,446 connections, 10,604 people served
CenterPoint Energy, Texas-New Mexico Power and Jackson Electric CooperativeElectric utilities reporting service in Brazoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

In Clute, we use the American Community Survey 2019 to 2023 five year estimate placing median housing year at 1984 as context for underground work. The estimates show 9 percent of housing built before 1960 and 35 percent built in 2000 or later. That mix can mean replacement work near older homes as well as new service runs. Near Brazosport Boulevard, we expose each marked utility with hydrovac potholing before the drill gets close; surface marks show position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Do we cover Clute and nearby Lake Jackson?

Clute is an incorporated city in Brazoria County, with 5.32 square miles of land and an elevation of 10 feet. Its ZIP codes are 77531, 77541 and 77566. Richwood is 2.6 miles north, and Lake Jackson is 3.6 miles northwest. Angleton, the county seat, is 10.3 miles north; Lake Jackson is the nearest larger city. Our Yukon yard is 512 road miles away, a 10.1 hour drive, so a Clute job near Texas State Highway 332 needs mobilization included in the plan.

Places near Clute

What bores could run near Plantation Drive in Clute?

  • Highway crossing: A route beneath Texas State Highway 332 needs a TxDOT utility permit and a bore plan that fits the required cover.
  • Water service: A new connection near Plantation Drive starts with identifying the City of Clute water line and exposing marked utilities along the route.
  • Fiber conduit: A path along Brazosport Boulevard can avoid opening pavement, with the exact route set around existing utility marks.
  • Rail crossing: A proposed bore under Union Pacific’s Freeport Subdivision needs an agreement with the railroad for casing, depth and flagging.
  • Drainage crossing: A route near the Lake Jackson-Clute Drng Canal needs channel depth planned and jurisdiction checked during planning.
  • Electric conduit: For a Clute route near Texas State Highway 288, we first establish which county reported electric provider owns the line at that location.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do we need to quote a Clute bore near Union Pacific?

A map pin matters near Brazosport Boulevard because the exact route can decide whether a bore approaches a highway, Union Pacific track or drainage. For a Clute quote, send the address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see pits, crossings and access before we set the bore approach.

A simple service route near Plantation Drive with clear access is easier to plan than a route that has to reach beneath Texas State Highway 332 or Union Pacific track. Price reflects length, pipe or conduit size, soil, crossed and exposed utilities, pavement, drainage crossings, pits, excavator time and sand backfill. Clute’s sticky Asa and heavy clay can affect reaming, while the 512 road miles from Yukon affect mobilization. High profile or emergency work can also add planning demands.

Questions people ask about boring in Clute

Does Trinity Boring Solutions take jobs in Clute, Brazoria County, and who staffs them?

Yes. Trinity takes directional boring work in Clute, and our crews work from the Yukon main office and vetted partner contractor satellite yards. For Clute planning, you work with us from the first call through the bore log, regardless of which crew handles the work. We identify the line owner before a route near Brazosport Boulevard is set.

Will a bore in Clute hit rock near Asa soil?

Rock is not mapped in the top five feet of Clute, but that does not establish conditions deeper down. The geologic map shows Holocene Alluvium with sand, silt, clay and gravel. The USDA soil survey maps Asa as 30 percent of the city, so we plan for clay behavior while checking actual ground conditions as the job proceeds.

Who approves a Clute bore under Texas State Highway 332?

TxDOT’s Houston District reviews the utility permit for Texas State Highway 332. The utility owner files through the RULIS system; we supply the bore plan and profile and work under the permit issued to that owner. Required cover depends on the line, so the proposed crossing depth is part of the permit plan.

What does a Clute bore under Union Pacific track require?

A bore under Union Pacific track needs an agreement from the railroad that owns it. The agreement sets crossing details such as casing, depth and flagging. Union Pacific has 4.46 track miles in Clute on the Freeport Subdivision, so a proposed route has to account for the railroad crossing before the bore plan is finalized.

Can a line be bored beneath the Lake Jackson-Clute Drng Canal near Clute?

A bore beneath the Lake Jackson-Clute Drng Canal can be planned, but the crossing needs review for U.S. Army Corps of Engineers jurisdiction. The canal is mapped 0.2 miles outside Clute. We would plan the bore depth and route around the channel rather than assume that a street crossing and a water crossing have the same conditions.

For Clute boring plans, who owns the public water system serving 5,446 service connections, and where does its water come from?

For Clute underground work, we identify the City of Clute as owner of the public water system using purchased surface water. Public records list 5,446 service connections and 10,604 people served. For a new water line near Plantation Drive, we identify the existing system line and expose marked utilities before choosing the bore path.

Does Trinity cover Richwood and rural sites outside Clute?

Yes. We take work in Richwood and rural locations outside Clute, as well as within the city. Richwood is 2.6 miles north of Clute, but the route and access still matter for each job. A pin near the site helps us assess the distance, utility crossings and mobilization from Yukon.

How much notice does Texas811 need for a Clute bore near Brazosport Boulevard?

For a Brazosport Boulevard bore, allow for the 20 day ticket window around the planned schedule. Texas811 needs the locate request at least two working days before excavation, not counting weekends or legal holidays, and no earlier than 14 days ahead. For Clute schedules, we submit a new request if the start slips more than 14 days past the original notice. Before we continue boring work in Clute, we have worn or moved marks refreshed.

What affects the cost of directional boring in Clute under Texas State Highway 332?

The job scope sets the price, not just the length. A bore under Texas State Highway 332 may involve highway cover, a TxDOT permit and pavement protection. Other factors include pipe size, Clute’s heavy clay, utility exposures, pits, drainage crossings and access. Union Pacific track or the 512 road miles from Yukon can also change the work plan and mobilization.

Where the Clute facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Clute

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Clute, Texas

Type the address of your job in Clute. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Clute

Same county: Pearland · Alvin · Angleton · Manvel · Iowa Colony · West Columbia · Sweeny · Brazoria · Wild Peach Village · Danbury · Brookside Village · Rosharon. All counties: Texas county list.