trinityboringsolutions.com

Encino Texas Directional Boring: Falfurrias Fine Sand, US 281, Lucero Street

Quick Answer: Encino is an unincorporated community in Brooks County, so county or state agencies own its streets and highway rights of way; we take directional boring, also called horizontal directional drilling (HDD), for routes such as US 281. Lucero Street is one of Encino’s named public roads. From our Yukon, Oklahoma main office, Encino is 650 road miles away, and US 281 runs through the mapped community. The USDA soil survey maps Falfurrias fine sand across much of Encino, so the hole needs support against loose sand that can cave behind the drill.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Encino bores at a glance

  • Unincorporated community in Brooks County, Texas. Population 109 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 650 miles, about 12.7 hours of driving.
  • Ground: Falfurrias soil is mapped on 46 percent of the area, with fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 281 and US 281 Business. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can do directional boring on Lucero Street in Encino?

Encino is an unincorporated community in Brooks County, with a 2020 Census count of 109 people. We install water, sewer, gas, electric conduit and fiber lines, including service routes along Lucero Street or Las Cuatas Road. The county and state, rather than a city government, own or oversee the roads where those lines may run.

Our main office is in Yukon, Oklahoma, and Encino work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle bores from 3/4 inch service lines to 48 inch casing. A short service run near Cordova Road and a larger casing job beneath US 281 fit that range. Our family business began in 1965 and has done directional boring since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore encounter in Encino near Falfurrias?

The USDA soil survey maps Falfurrias soil across 46 percent of Encino, with Sarita at 16 percent, Nueces at 15 percent and Padrones at 13 percent. These mapped shares describe the area, not test borings. Fine sand makes up 95 percent of mapped surface texture. At about 40 inches below the surface, the survey maps 66 percent fine sand, 17 percent fine sandy loam and 16 percent sandy clay loam. Loose sand is easy to cut but can cave behind the drill, so the bore needs support as it is reamed.

USDA soil survey, inside the Encino mapped community boundaryWhat is mapped
Soil series mappedFalfurrias 46 percent, Sarita 16 percent, Nueces 15 percent, Padrones 13 percent and Yturria 4 percent
Texture at the surfacefine sand 95 percent and fine sandy loam 4 percent
Texture about 40 inches downfine sand 66 percent, fine sandy loam 17 percent and sandy clay loam 16 percent
Engineering class about 40 inches downsand with silt (SP SM) 62 percent, clayey sand (SC) 29 percent and silty clayey sand (SC SM) 4 percent
Average clay content about 40 inches down8 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel2 percent of the area

Bedrock is not mapped in the top five feet across Encino, including around Lucero Street, though that does not establish conditions deeper down. The survey maps a seasonal water table within 60 inches in 1 percent of the area, so pits may need pumping where they encounter water. In Brooks County, we see no mapped flood prone soils to flag before planning a bore route. High steel corrosion risk covers 2 percent of the area, a consideration for uncoated casing or tracer wire. The geologic map shows Holocene sand sheet deposits, mostly sand with little or no relict grain.

How do we bore Encino’s fine sand?

The USDA survey maps fine sand across most of Encino, including Falfurrias soil. We support the bore as it advances, check nearby lines before drilling, and keep the pipe ready for the final pull.

  1. Because Falfurrias fine sand is common in Encino, we use drilling fluid to help hold the bore open and ream in stages before the pipe is pulled.
  2. At a Lucero Street route, we hydrovac pothole each marked utility on the bore path; paint shows position, not depth, so we expose the line.
  3. Where a pit near Cordova Road meets water, the mapped seasonal water table calls for small pits and pumping as needed.
  4. For a path under US 281, we track the drill head from the surface and log depth and pitch while keeping the pavement uncut.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What does a bore cross in Encino near US 281?

US 281 runs for 3.5 mapped roadway miles inside Encino, and US 281 Business runs for 2.8 miles. A route beneath either highway needs a bore plan that accounts for the road and its right of way. Lucero Street is the longest named street at 2.51 miles in the community. Las Cuatas Road measures 0.18 miles and Cordova Road measures 0.16 miles. Those roads help identify the route, but the exact address or map pin is needed to locate the proposed crossing.

CrossingTypeMapped extentWho has a say
US 281US highway3.5 roadway miles insideState highway office
US 281 BusinessUS highway2.8 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Encino or within 1 mile outside the community, so a mapped rail crossing is not part of the local route picture. No street and rail crossings are mapped inside the community. No streams, named stream crossings or lakes and ponds are mapped within the stated local search areas. A route along Lucero Street still needs a site check for marked utilities and other obstacles before the drill path is set.

Who approves a bore in Encino and Brooks County?

Encino has no city government, so the county or state has authority over the streets and permits in its jurisdiction. For work in the right of way of US 281 or US 281 Business, the line owner applies for a utility permit through TxDOT’s online RULIS system. The TxDOT Pharr District reviews it. The utility owner files, while we prepare the bore plan and profile and work under the permit issued to that owner. A line along a county road such as Lucero Street needs approval from the agency responsible for that road. No railroad or stream crossing is mapped here.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines may be in Encino and Brooks County?

The water provider for a specific Encino address has to be confirmed with the county or local water district before a bore is planned. Electric utilities reporting service in Brooks County are AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric Cooperative; that does not identify which one serves each address. We confirm the line owner before a conduit bore along Cordova Road or elsewhere.

Line ownerWhat it isSourceSize
AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric CooperativeElectric utilities reporting service in Brooks CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

For Encino, the American Community Survey 2019 to 2023 five year estimates place the median housing year at 1972; we assess underground work by the actual route. The estimates show 44 percent of housing built before 1960 and 56 percent built from 1960 through 1999, with none built in 2000 or later. That mix can mean replacement work as well as service connections. Before a bore near Lucero Street, we use hydrovac potholing to expose marked lines, including lines whose water or electric owner must first be confirmed. Paint marks location, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Encino near Airport Road Addition?

Encino is an unincorporated community in Brooks County, covering 6.71 square miles at an elevation of 112 feet. Its ZIP code is 78353. Cantu Addition is 18.5 miles north, Airport Road Addition is 19.6 miles north and Flowella is 19.8 miles north. Falfurrias, the county seat, is 20.0 miles north. Raymondville is the nearest larger city listed, 38.0 miles southeast. From our Yukon, Oklahoma main office, the road trip to Encino is 650 miles and 12.7 drive hours, which affects how we plan mobilization for a job near US 281.

Places near Encino

Which jobs call for a bore near Las Cuatas Road in Encino?

  • Highway crossing: A bore beneath US 281 or US 281 Business keeps the roadway surface uncut and needs a route planned for the highway right of way.
  • Water service: A service route near Cordova Road starts with confirming the address specific water provider with the county or local water district.
  • Fiber route: A fiber bore along Lucero Street can place conduit without opening a trench through the mapped public road.
  • Electric conduit: A conduit path near Las Cuatas Road requires confirming which Brooks County electric utility owns the line at that address.
  • Service replacement: A replacement route near Lucero Street may serve older housing, with hydrovac potholes used to expose marked lines before drilling.
  • Large casing: A larger casing bore beneath US 281 needs its size, length and highway crossing details set out for permit planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Lucero Street in Encino?

Send the map pin or address first. A location on Lucero Street versus a crossing of US 281 changes what the route must avoid and which authority may review it. For a US 281 Business crossing, tell us what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans help us assess the proposed path.

Falfurrias fine sand is a key price factor because loose ground can need extra support and staged reaming. The number and location of utilities to expose matter, as do pipe size and bore length. A crossing beneath US 281 can add pavement and permit planning, while concrete, pits, excavator time and sand backfill affect the work. At 650 road miles from Yukon, mobilization also matters. For US 281 work, high profile or emergency work can change the scope, and we review the crossing plan accordingly.

Questions people ask about boring in Encino

Does Trinity take directional boring work in Encino and Brooks County, and who staffs it?

Yes. We take directional boring work in Encino, and we stay your contact from the first call through the bore log. Our own crews and partner contractor crews vetted by Trinity handle the field work. For a route on Lucero Street, the address and scope help us plan which crew and equipment to send.

What ground does a bore pass through in Encino near Falfurrias?

The USDA soil survey maps Falfurrias soil across 46 percent of Encino, and fine sand accounts for 66 percent of mapped texture at about 40 inches below the surface. We treat the Falfurrias, Sarita, Nueces, and Padrones soil patterns as mapped context, not test borings for Encino planning. Loose fine sand cuts readily but can cave behind the bit, so the hole needs support during reaming.

Will we hit rock with a directional bore in Encino, where mapped soil series include Falfurrias and surface soil is fine sand?

Bedrock is not mapped in the top five feet in Encino, but that does not rule out deeper rock. The geologic map instead identifies Holocene sand sheet deposits, mostly sand with little or no relict grain. A planned bore near Lucero Street still needs field observation as drilling advances.

Who approves a bore under US 281 in Encino?

The line owner applies for a TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews work in the US 281 right of way. We provide the bore plan and profile for the utility owner’s application and work under its permit. The route and cover requirements depend on the line being installed.

Which electric company owns a line at an Encino address in Brooks County?

AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric Cooperative report service in Brooks County, but that does not establish the owner at a particular Encino address. Confirm the line owner before planning conduit near Cordova Road, and confirm conduit specifications with that owner.

Who is responsible for Encino streets like Cordova Road, and must a bore cut them?

Encino is unincorporated and has no city government, so the county or state is responsible for streets and permits in its jurisdiction. Directional boring can pass beneath Cordova Road without cutting the pavement. The mapped community has no street and rail crossings, but the exact route still needs utility locating.

Can I reach Trinity after hours about an urgent bore in Encino near Cordova Road?

Yes. A person answers our phone 24 hours a day at (405) 409-7423. If an urgent job near Cordova Road involves a marked line or a roadway, share the location and the work needed so we can discuss the next step.

How much notice does Texas811 need before boring near Lucero Street in Encino?

Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If work near Lucero Street slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore under US 281 in Encino?

We base price on job scope, including the 650 road miles from Yukon main office when evaluating an Encino project. Falfurrias fine sand, bore length and pipe or conduit size affect the work, as do utility exposures, pavement and the number of crossings. A US 281 route adds highway planning, and the 650 road miles from Yukon affect mobilization. Pits, excavator time, sand backfill and emergency timing can also change the scope.

Where the Encino facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Encino

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Encino, Texas

Type the address of your job in Encino. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Encino

All counties: Texas county list.