Directional Boring Contractors in Brooks County, TX

Trinity Boring Solutions is a directional boring contractor serving Brooks County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Falfurrias. From the Trinity main office in Yukon, Oklahoma it is about 635 road miles south to Falfurrias, the county seat. Bores here most often pass under US 281 and State Highway 285 and Palo Blanco Creek. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Brooks County, Texas

Type the address of your job in Brooks County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Brooks County?

Brooks County covers 943 square miles, has about 6,740 residents and sits in the TxDOT Pharr District.

County seatFalfurrias
Population6,740 (2024 Census estimate), down 5.4% since 2020
Land area943 square miles
Largest cities and townsFalfurrias (4,351)
TxDOT districtTxDOT Pharr District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesAEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric Cooperative
Interstate and US highwaysUS 281
State Highways285
Creeks and other streamsPalo Blanco Creek, Los Olmos Creek, Palobia Creek, Vargos Creek, Una de Gato Creek, Vargas Creek, Laborcitas Creek and Cibolo Creek
RailroadsNo main line track
Average precipitation24.3 inches a year (1991 to 2020)
Road distance from Trinity main officeAbout 635 miles from Yukon, Oklahoma to Falfurrias
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Brooks County?

A bore in Brooks County most often has to cross a highway such as US 281 or State Highway 285 and a stream such as Palo Blanco Creek or Los Olmos Creek. State Highways 285 also run through the county. The Census map names 9 larger streams in Brooks County, led by Palo Blanco Creek, Los Olmos Creek, Palobia Creek, Vargos Creek, Una de Gato Creek and Vargas Creek. The rest are Laborcitas Creek, Cibolo Creek and Calosa Creek. There is no main line railroad in Brooks County.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Brooks County?

Sand is the main thing to plan for in Brooks County: the federal soil survey records sandy layers in the top five feet on about 79 percent of the county, with fine sand the most common surface soil. A bore through sand in Brooks County is kept full of drilling fluid so the hole stands until pullback. September is the wettest month in Brooks County at 4.6 inches on average and February the driest at 1.0. Brooks County averages 24.3 inches of precipitation a year, so the ground is usually dry at bore depth.

  • Most common soils: Sarita (25%), Nueces (22%) and Falfurrias (19%).
  • Surface texture: most often fine sand (72%) or loamy fine sand (7%).
  • Bedrock within 5 feet: rare, on less than 1% of the county.
  • Clay rich layer in the top 5 feet: rare, on less than 1% of the county.
  • Sandy layer (70% sand or more) in the top 5 feet: about 79% of the county.
  • Seasonal water table within 5 feet: about 9% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Brooks County, Texas (survey area TX047, version 23, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Brooks County?

The TxDOT Pharr District permits bores under state highways in Brooks County, the Brooks County Commissioners Court handles county roads, and Falfurrias handles its own streets.

  • State highways. US 281, the other numbered state routes and the farm to market roads in Brooks County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Water crossings. A bore under Palo Blanco Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Brooks County?

AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric Cooperative serve Brooks County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas Central is an investor owned utility; Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric Cooperative are member owned cooperatives. Knowing which one holds the territory at the address is the first step on a conduit bore in Brooks County. More on electric line boring for electric cooperatives.

Is Brooks County Growing?

The population of Brooks County went from 7,127 in 2020 to 6,740 in 2024, a loss of 5.4 percent. In Brooks County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.

Which Cities and Towns in Brooks County Does Trinity Serve?

Trinity takes directional boring work in Falfurrias, the only incorporated place in Brooks County with about 4,351 residents, and at sites outside the city limits.

City or town2024 population
Falfurrias4,351

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Brooks County.

Brooks County borders Duval County, Hidalgo County, Jim Hogg County, Jim Wells County, Kenedy County, Kleberg County and Starr County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are San Diego (Duval), Edinburg (Hidalgo), Hebbronville (Jim Hogg), Alice (Jim Wells), Sarita (Kenedy), Kingsville (Kleberg) and Rio Grande City (Starr).

Which Directional Boring Services Are Available in Brooks County?

Every Trinity service is available in Brooks County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Brooks County job before you call.

Brooks County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Falfurrias, Texas?

Yes. Trinity Boring Solutions takes work in Falfurrias and the rural parts of Brooks County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 281 in Brooks County?

The TxDOT Pharr District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Brooks County Commissioners Court and city streets through the city.

Is there rock in Brooks County?

Rarely. The federal soil survey records bedrock within five feet of the surface on less than 1 percent of Brooks County. Potholing confirms it on the actual bore path.

Can a line be bored under Palo Blanco Creek in Brooks County?

Yes. A drill is steered below the bed of Palo Blanco Creek from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Is Trinity insured for work in Brooks County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Brooks County?

The footage and the pipe size give a general range to start from. Depth, the crossings and the ground set the number, and loose sand is a factor on many Brooks County jobs.

How Do You Get a Bore Quote in Brooks County?

Call (405) 409-7423 any time or send the address in Brooks County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.