trinityboringsolutions.com

Benavides Texas Directional Boring: Colmena Soil, FM 2295 and Las Animas Creek

Quick Answer: Can you get a line under a Benavides road, track or creek without cutting across it? We take directional boring and horizontal directional drilling (HDD) work in Texas, including a bore beneath CPKC (Kansas City Southern) track in Benavides. The Yukon main office is 615 road miles away, with FM 2295 among the local routes to plan around. Colmena soil and sandy clay loam call for managing the hole as it is opened. At Las Animas Creek, the route and channel conditions shape the crossing plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Benavides bores at a glance

  • Incorporated city in Duval County, Texas. Population 1,137 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 615 miles, about 12.1 hours of driving.
  • Ground: Colmena soil is mapped on 26 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 2295, Texas State Highway 339, Texas State Highway 359 and FM 3196. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: CPKC (Kansas City Southern), with 11 mapped street and rail crossings.
  • Named streams inside the boundary: Las Animas Creek and Santa Gertrudis Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles bores beneath FM 2295 in Benavides?

Can you get your line beneath a Benavides road without cutting across it? We take directional boring work in Benavides, an incorporated city in Duval County with 1,137 residents, according to the Census Bureau Vintage 2024 estimate. Water, sewer, gas, electric conduit and fiber can be installed beneath streets such as Main Street or routes including FM 2295, with the bore path planned for the specific line and crossing.

Our main office is in Yukon, Oklahoma, and Benavides work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. For a service line or a larger casing beneath FM 2295, our range runs from 3/4 inch lines to 48 inch casing and from 10 feet to 5,000 feet.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

How does Colmena soil shape boring in Benavides?

The USDA soil survey maps Colmena as the leading soil series in Benavides, covering 26% of the mapped area. Colmena fine sandy loam on 0 to 3 percent slopes is the largest named map unit. Fine sandy loam makes up 70% of mapped surface texture, while sandy clay loam accounts for 60% of the texture mapped at about 40 inches below the surface. Average clay content at that depth is 29%, and only 6% of the area is mapped as sandy there. These are mapped patterns, not test borings, so the route still needs site specific planning.

USDA soil survey, inside the Benavides city limitsWhat is mapped
Soil series mappedColmena 26 percent, Delmita 15 percent, Benavides 14 percent, Gertrudis 12 percent and Czar 10 percent
Texture at the surfacefine sandy loam 70 percent, sandy clay loam 16 percent and gravelly fine sandy loam 10 percent
Texture about 40 inches downsandy clay loam 60 percent, cemented material 24 percent and clay loam 14 percent
Engineering class about 40 inches downlean clay (CL) 61 percent, silty sand (SM) 7 percent and clayey sand (SC) 6 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel1 percent of the area

Bedrock is not mapped in the top five feet of Benavides, but the geologic map shows what lies below: modern alluvium of Holocene age, with gravel, sand, silt, clay and organic material in active channels and low terraces, and the Goliad Formation of Miocene age, including clay, sandstone, marl, caliche, limestone and conglomerate. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 6% of the area, so a Las Animas Creek route needs channel depth planning. High steel corrosion risk is mapped for 1% of the area; the line owner can address casing or tracer wire protection.

How do we bore Benavides sandy clay loam?

Benavides has fine sandy loam at the surface and sandy clay loam mapped deeper down. We match fluid and reaming to the ground along the planned route, including beneath FM 2295 or Main Street.

  1. In Colmena fine sandy loam, we adjust drilling fluid and use staged reaming when needed to keep the hole workable before pulling the line.
  2. Where sandy clay loam is mapped about 40 inches down, we watch for soil movement and prepare the pipe before the final reaming pass.
  3. Near Las Animas Creek, we plan the bore depth beneath the channel and check the crossing for possible U.S. Army Corps of Engineers jurisdiction.
  4. Along Main Street or FM 2295, we expose every marked utility on the bore path with hydrovac before drilling near it, since surface marks do not show depth.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What can a Benavides bore cross near CPKC (Kansas City Southern)?

FM 2295 has 2.5 mapped roadway miles within Benavides, alongside Texas State Highway 339 and Texas State Highway 359, each with 2.3 miles in the city. FM 3196 has 0.2 miles. A route beneath one of these state roads needs a bore plan that accounts for the right of way and pavement. Main Street is the longest named street at 1.1 miles, followed by Humble Street and Texas Boulevard at 1.06 miles each. We can plan an underground crossing so those surfaces are not cut across.

CrossingTypeMapped extentWho has a say
FM 2295State highway2.5 roadway miles insideState highway office
Texas State Highway 339State highway2.3 roadway miles insideState highway office
Texas State Highway 359State highway2.3 roadway miles insideState highway office
FM 3196State highway0.2 roadway miles insideState highway office
CPKC (Kansas City Southern)Railroad3.24 track miles insideThe railroad
Las Animas CreekStream1.18 channel miles insideChecked for Corps of Engineers jurisdiction
Santa Gertrudis CreekStream0.15 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

CPKC (Kansas City Southern) owns 3.24 track miles within Benavides, and public mapping shows 11 street and rail crossings in the city. A bore beneath the track needs the railroad owner’s crossing agreement, which sets the crossing conditions. Las Animas Creek runs 1.18 channel miles inside the city, and Santa Gertrudis Creek runs 0.15 miles; mapped streets cross named streams at 8 locations. We plan boring in Benavides with no mapped lakes or ponds within one mile, while confirming conditions at the specific crossing. Creek routes need channel depth planning and a check for federal jurisdiction.

Who approves a Benavides bore in Duval County?

Benavides is incorporated, so its city streets belong to the city itself; we do not name a city permit or fee. For work in the right of way of FM 2295, Texas State Highway 339, Texas State Highway 359 or FM 3196, the line owner, not the driller, applies through TxDOT’s online RULIS system. The TxDOT Laredo District reviews the application, and we provide the bore plan and profile for the utility owner’s filing. TxDOT cover requirements vary by line type, including 60 inches for electric and communication crossings and 60 inches for water crossings; the permit can specify another depth. A crossing beneath CPKC track also needs the railroad owner’s agreement. Las Animas Creek planning includes a check for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already in the ground in Duval County in Benavides?

The water provider for a specific Benavides address has to be confirmed with the city, Duval County or the local water district before a bore is planned. County electric service is reported by AEP Texas Central, Medina Electric Cooperative and Nueces Electric Cooperative. Those reports do not identify which provider serves every address, so we confirm the electric line owner before planning a conduit bore near Main Street or another route.

Line ownerWhat it isSourceSize
AEP Texas Central, Medina Electric Cooperative and Nueces Electric CooperativeElectric utilities reporting service in Duval CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use Benavides’s median housing year of 1971 from the American Community Survey 2019 to 2023 five year estimates as context for underground planning. The survey estimates that 30% of homes were built before 1960, 51% from 1960 to 1999 and 19% in 2000 or later. That mix can mean a project replaces older service lines or supplies newer construction. Before a bore near Main Street reaches any marked utility, we hydrovac pothole it to check its actual depth; paint shows location, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Benavides in relation to Realitos and our Yukon yard?

Benavides is an incorporated city wholly in Duval County, at an elevation of 377 feet and covering 1.77 square miles. Its ZIP code is 78341. Realitos is 12.7 miles southwest, Concepcion is 14.4 miles south, and San Diego, the county seat, is 15.6 miles northeast. Alice, the nearest larger city, is 24.0 miles northeast. The Yukon main office is 615 road miles away, a 12.1 hour drive, so distance is part of planning a job near FM 2295 or Las Animas Creek.

Places near Benavides

What boring work comes up near Las Animas Creek in Benavides?

  • Highway crossing: A bore beneath FM 2295 can carry a utility across the route without cutting through its pavement.
  • Street service: A water or sewer service beneath Main Street can connect a property while leaving the street surface uncut.
  • Rail crossing: A line beneath CPKC (Kansas City Southern) track needs a route and crossing plan that meets the railroad agreement.
  • Creek crossing: A bore beneath Las Animas Creek can keep the channel banks uncut, with depth and jurisdiction checked during planning.
  • Utility conduit: Electric conduit or fiber near Texas State Highway 339 needs a confirmed line owner and a planned right of way route.
  • Water service: A service near Santa Gertrudis Creek needs its address specific water provider confirmed before the bore is planned.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near Main Street in Benavides?

Start with the Benavides address or a map pin, such as a Main Street crossing. Tell us what goes underground, whether it is water, sewer, gas, electric conduit or fiber, then give the pipe or conduit size and footage. A sketch or plans showing nearby features such as CPKC track or Las Animas Creek help us understand the route.

For directional boring in Benavides, we set the price according to the job scope because crossing work can vary. In Benavides, soil conditions matter first: Colmena fine sandy loam and sandy clay loam may call for different fluid and reaming choices. We also account for bore length, pipe size, and utilities to expose, plus pavement, pits, backfill and excavator time. A CPKC crossing or work near Las Animas Creek adds crossing conditions to plan for. Mobilization is affected by the 615 road miles from Yukon, as are high profile or emergency requirements.

Questions people ask about boring in Benavides

Does Trinity take directional boring jobs in Benavides, Duval County, and who staffs them?

Yes. We take directional boring work in Benavides, Duval County, using our own crews and partner contractor satellite yards that Trinity has vetted. You stay in contact with Trinity from the first call through the bore log, even if a partner crew is working at the site. A route beneath FM 2295 can be part of that scope.

What ground should I expect for a Benavides bore through Colmena soil?

The USDA soil survey maps Colmena fine sandy loam across 26% of Benavides, and sandy clay loam covers 60% of mapped texture at about 40 inches down. These are area patterns, not site borings. The clay content can affect how the hole behaves, so we plan fluid and reaming for the ground along your route, including near Main Street.

Will our bore in Benavides hit rock, given that bedrock is not mapped in the top five feet but deeper conditions remain unknown?

We treat bedrock not mapped in Benavides’s top five feet as no indication that deeper boring conditions are rock free. The geologic map shows modern alluvium of Holocene age and the Goliad Formation of Miocene age. A bore near Las Animas Creek may encounter mixed channel or floodplain deposits, so the actual route and depth guide the drilling plan.

Who approves a bore under FM 2295 in Benavides?

For work in FM 2295 right of way, the utility line owner applies through TxDOT’s online RULIS system, and the TxDOT Laredo District reviews it. We supply the bore plan and profile for the utility owner’s filing. The permit sets the project requirements, including cover depth, so the route is planned to match the approval.

What does a bore under CPKC (Kansas City Southern) track in Benavides require?

A crossing under the CPKC (Kansas City Southern) track needs an agreement from the railroad that owns it. The railroad sets crossing conditions such as casing, depth and flagging. CPKC has 3.24 track miles within Benavides, so a route crossing its tracks needs railroad coordination before the bore proceeds.

Can you bore a line under Las Animas Creek in Benavides?

Yes, a bore can be planned beneath Las Animas Creek, which runs 1.18 channel miles within Benavides. The route needs enough depth to stay under the channel, and creek planning includes checking for U.S. Army Corps of Engineers jurisdiction. Soil and access on both sides of the crossing also shape the bore plan.

How early do I need to call 811 for a Benavides bore near Main Street?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. We include Texas811’s notice of at least two working days in the schedule for boring work in Benavides. If the start slips more than 14 days past the original notice, request a new ticket; have worn or moved marks refreshed before work continues near Main Street.

Does Alice’s distance from Benavides change a directional boring job from Yukon?

Alice is 24.0 miles northeast of Benavides, but mobilization is planned from Trinity’s Yukon, Oklahoma main office, 615 road miles away. The drive is 12.1 hours. That distance can affect mobilization planning for a job near FM 2295, along with the bore length, crossings and equipment needed.

What affects the cost of a directional bore under FM 2295 in Benavides?

The job scope determines the price, not a single standard rate. Soil such as Colmena fine sandy loam, bore length and pipe size affect the plan, as do utilities that need exposure, pavement, pits, backfill and equipment time. A crossing under FM 2295 or CPKC track adds its own planning needs, and the 615 road miles from Yukon affect mobilization.

Where the Benavides facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Benavides

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Benavides, Texas

Type the address of your job in Benavides. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Benavides

Same county: Freer. All counties: Texas county list.