trinityboringsolutions.com

Freer Texas Directional Boring: Houla Clay Loam, US 59 and Soledad Creek

Quick Answer: The Freer Water Control and Improvement District runs the groundwater system, while AEP Texas Central, Medina Electric Cooperative and Nueces Electric Cooperative report electric service in Duval County, so we confirm line ownership before a bore near Main Avenue. We take directional boring, also called horizontal directional drilling (HDD), work in Freer, Texas, including routes beneath US 59. The Yukon main office is 595 road miles away, so distance affects mobilization for a US 59 job. Houla clay loam covers 56 percent of the mapped area, and its sticky cuttings can build on a reamer. We plan the reaming and fluid for that ground before pulling pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Freer bores at a glance

  • Incorporated city in Duval County, Texas. Population 2,352 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 595 miles, about 11.6 hours of driving.
  • Ground: Houla soil is mapped on 56 percent of the area, with loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 14 percent of the area.
  • Highways inside the boundary: US 59, Texas State Highway 16 and Texas State Highway 44. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Freer Water Control and Improvement District, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring in Freer, Duval County?

We take directional boring jobs in Freer, an incorporated city in Duval County. The Census Bureau Vintage 2024 estimate puts Freer at 2,352, a figure we keep separate from planning underground work along US 59. For a route along Main Avenue, we can bore water, sewer, gas, electric conduit or fiber lines beneath the street instead of opening the pavement. We confirm the line owner and the route before setting the bore plan.

Our main office is in Yukon, Oklahoma, and Freer work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A short service line near Duval-Freer Airport and a long casing route under US 59 illustrate the range we handle, from 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet. When planning directional boring near Riley Street, we draw on a family business begun in 1965 and directional boring experience dating to 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Houla soil like to bore in Freer?

The USDA soil survey maps Houla soil across 56 percent of Freer, mainly as Houla clay loam with 0 to 3 percent slopes. That clay loam can hold an open hole, but sticky cuttings may collect on the reamer and grip pipe. At about 40 inches below the surface, the survey maps loam in 56 percent of the area and sandy clay loam in 28 percent. We treat Houla, Tela, Lomart, and Salco as mapped soil patterns with clay loam surface texture, not as test borings. A route near Norton Avenue still needs its own utility checks and field observations.

USDA soil survey, inside the Freer city limitsWhat is mapped
Soil series mappedHoula 56 percent, Tela 16 percent, Lomart 14 percent, Salco 8 percent and Czar 4 percent
Texture at the surfaceclay loam 56 percent, sandy clay loam 20 percent and loam 14 percent
Texture about 40 inches downloam 56 percent, sandy clay loam 28 percent and bedrock 14 percent
Engineering class about 40 inches downlean clay (CL) 59 percent and clayey sand (SC) 24 percent
Average clay content about 40 inches down20 percent
Bedrock mapped within 60 inches14 percent of the area (0 percent hard rock, 14 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils16 percent of the area
High corrosion risk for uncoated steel56 percent of the area

The USDA soil survey maps bedrock within 60 inches in 14 percent of Freer, with typical depth at 38 inches; the mapped bedrock is weathered, so the drill may slow where soil meets rock. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 16 percent. The Catahoula and Frio and Vicksburg Formations, undivided, are mapped as Cenozoic and include sandstone and mudstone. High steel corrosion risk covers 56 percent, a concern for uncoated casing or tracer wire that the line owner should address.

How do we drill Freer ground with loam?

On a Freer route, Houla clay loam and pockets of mapped weathered bedrock call for a bore plan that fits the ground. We expose marked utilities, track the drill head and log depth and pitch as the work advances.

  1. Houla clay loam can make cuttings cling to the reamer, so we use staged reaming and prepare the pipe before opening the final hole near Main Avenue.
  2. Where the Freer soil survey maps loam at about 40 inches, we adjust drilling fluid to the ground and keep a close watch on the bore path.
  3. With weathered bedrock mapped in parts of Freer, we expect slower progress where the bit moves from soil into rock and track depth and pitch.
  4. Before drilling near Riley Street, we hydrovac expose marked utilities; paint shows their position, but potholing checks their actual depth.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where does a line have to go under Soledad Creek near Freer?

US 59, Texas State Highway 16 and Texas State Highway 44 run within Freer, so a route crossing one of them needs early planning around pavement and right of way. Main Avenue, Riley Street and Norton Avenue are among the city’s longest named streets. We can plan a bore beneath pavement rather than cut across it, with the alignment, entry and exit pits set for the actual utility route. The mapped roadway lengths inside the city are 2.0 miles for US 59, 2.9 for Highway 16 and 2.0 for Highway 44.

CrossingTypeMapped extentWho has a say
US 59US highway2 roadway miles insideState highway office
Texas State Highway 16State highway2.9 roadway miles insideState highway office
Texas State Highway 44State highway2 roadway miles insideState highway office
Soledad CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Rosita CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Freer or within 1 mile outside its limits, so no local track crossing is identified in these records. Soledad Creek lies 0.9 miles from the city limits and Rosita Creek lies 1.0 mile away; neither stream is mapped inside the city. No street crossings of named streams are mapped in Freer, and no lakes or ponds are mapped within 1 mile. If a planned route reaches a creek, the crossing can be checked for federal jurisdiction during planning.

Does the TxDOT Laredo District issue the permit for a bore under US 59 in Freer?

Freer is incorporated, so its city streets, including Main Avenue, belong to the city. For work in the right of way of US 59, Texas State Highway 16 or Texas State Highway 44, the utility that owns the line files the utility permit in TxDOT’s online RULIS system. TxDOT’s Laredo District reviews it. In Duval County, we provide the line owner with the bore plan and profile, then work under the permit issued to that owner. For electric and communication lines crossing a highway, the stated cover is at least 60 inches below the lowest point of the crossed grade; along the right of way it is 48 inches.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Freer near the Freer Water Control and Improvement District?

The Freer Water Control and Improvement District is a local government system using groundwater wells. It serves 2,923 people through 1,269 service connections, so water routes may involve existing district lines. AEP Texas Central, Medina Electric Cooperative and Nueces Electric Cooperative report electric service in Duval County. We confirm which owner has a line at the proposed address before planning an electric conduit bore near Riley Street.

Line ownerWhat it isSourceSize
Freer Water Control and Improvement DistrictPublic water systemGroundwater wells1,269 connections, 2,923 people served
AEP Texas Central, Medina Electric Cooperative and Nueces Electric CooperativeElectric utilities reporting service in Duval CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Freer’s median housing year at 1979. The survey reports 12 percent of housing built before 1960, 77 percent from 1960 to 1999 and 11 percent in 2000 or later. Along Norton Avenue, a replacement bore may follow older buried service routes, while a new connection needs a different alignment check. We hydrovac pothole marked utilities on the bore path before drilling near them, since paint shows position but not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Freer in relation to San Diego?

Freer is in Duval County, covers 4.12 square miles and sits at an elevation of 518 feet. Its ZIP code is 78357. Benavides is 23.3 miles southeast, and San Diego, the county seat, is 24.6 miles east. Alice, the nearest larger city listed, is 34.8 miles east. From our Yukon, Oklahoma main office, the road distance is 595 miles and the drive is 11.6 hours. That distance makes mobilization part of planning a Freer job, whether the route is near US 59 or a local street.

Places near Freer

What kinds of bores come up in Freer near Main Avenue?

  • Highway crossing: A bore under US 59 can keep the existing pavement uncut while the line passes beneath the highway.
  • Water service: A connection near the Freer Water Control and Improvement District needs the route checked against existing groundwater system lines.
  • Street replacement: A water or sewer line along Main Avenue can be bored beneath the street to avoid an open cut across its pavement.
  • Fiber route: A conduit bore near Riley Street needs marked utilities exposed before the drill approaches them.
  • Creek crossing: A proposed route near Soledad Creek can be planned for depth below the channel and checked for federal jurisdiction.
  • Electric conduit: Before a conduit bore near Norton Avenue, we confirm which county reporting electric provider owns the line at that address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Freer bore near Riley Street?

For a Riley Street quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. The exact route matters because a marked utility or a crossing near US 59 can change the bore layout.

The job scope sets the price, with Houla clay loam and the planned length among the first things we assess because they shape reaming and pipe installation. Pipe or conduit size, exposed utilities, pavement, pit work and any creek crossing also affect the work. A route under US 59 adds highway coordination, while Freer’s 595 road miles from Yukon affect mobilization. The plan and site conditions, not just footage, determine the work involved.

Questions people ask about boring in Freer

Does Trinity take directional boring jobs in Freer, Duval County, and who staffs them?

Yes. We take jobs in Freer, Duval County, using our own crews or crews from satellite yards run by drilling contractor partners we have vetted. For planning near Rosita Creek, we stay involved from the first call through the bore log, whichever crew is on site. That keeps the planning and job communication with one contractor for a route near Main Avenue.

Who controls Main Avenue in Freer, and does a bore have to cut the street?

Freer is incorporated, so Main Avenue is a city street. A directional bore can pass beneath its pavement without cutting across the surface. We still need the proposed route, entry and exit locations, and marked utilities to plan the bore and check for conflicts along Main Avenue.

How do Freer’s housing age and buried lines near Norton Avenue affect replacement bores?

American Community Survey 2019 to 2023 five year estimates put Freer’s median housing year at 1979, with 12 percent of homes built before 1960. Older service routes near Norton Avenue may need replacement, but the alignment has to be checked rather than assumed. Before drilling along Norton Avenue, we pothole marked utilities to verify their locations.

Can groundwater or flood prone ground affect bore pits near Soledad Creek in Freer?

Seasonal water tables are not mapped within 60 inches in Freer, but flood prone soils cover 16 percent of the mapped area. Soledad Creek is 0.9 miles from the city limits, not inside them. If a proposed bore approaches the creek, we plan for channel depth and check jurisdiction during planning.

Does Houla soil in Freer corrode steel, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 56 percent of Freer, much of it where Houla clay loam is mapped. That is a concern for uncoated steel casing or tracer wire. The line owner selects any coating, and HDPE does not share that steel corrosion concern.

What ground does a bore pass through in Freer near Houla soil?

Houla clay loam covers 56 percent of Freer. At about 40 inches, the USDA soil survey maps loam in 56 percent of the area and sandy clay loam in 28 percent. Clay loam can hold the hole but may stick to the reamer, so we plan staged reaming and fluid for the mapped ground.

How much notice does Texas811 need for a bore on Riley Street in Freer?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, a new request is needed. If marks on Riley Street wear off or move, have them refreshed through Texas811 before work continues.

How far is Freer from Trinity’s Yukon office, and does Alice change the job?

Freer is 595 road miles and 11.6 drive hours from our Yukon, Oklahoma main office. Alice is 34.8 miles east and is the nearest larger city listed, but it does not change who manages the Freer job. The distance from Yukon is a mobilization factor for a bore near US 59.

What affects directional boring costs in Freer near US 59, including planning for clay loam surface soil?

The price depends on the job details, not a single local rate. Length, pipe size, Houla clay loam, utility crossings, pavement and pit work all affect the scope. A bore under US 59 needs highway planning, and mobilization reflects the 595 road miles from Yukon. Creek crossings and emergency or high profile work can also change the work plan.

Where the Freer facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Freer

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Freer, Texas

Type the address of your job in Freer. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Freer

Same county: Concepcion. All counties: Texas county list.