trinityboringsolutions.com

Marshall Texas Directional Boring: Kirvin Soil, Cox Creek and Union Pacific

Quick Answer: Kirvin soil can hold a bore open, but sticky clay may build up on the reamer; Cox Creek and Union Pacific tracks are among the crossings to plan around. We do directional boring, also called horizontal directional drilling (HDD), beneath Marshall roads such as Loop 390. Marshall is 369 road miles from our Yukon, Oklahoma main office, and the 15.16 miles of Union Pacific track in the city add crossing planning. At about 40 inches, clay is mapped across 47 percent of the area, so we adjust fluid and reaming to the ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Marshall bores at a glance

  • County seat of Harrison County, Texas. Population 24,263 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 369 miles, about 7.1 hours of driving.
  • Ground: Kirvin soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 38 percent of the area.
  • Highways inside the boundary: Interstate 20, US 59, US 80, Loop 390 and Texas State Highway 43. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: Union Pacific, with 22 mapped street and rail crossings.
  • Named streams inside the boundary: Cox Creek, Parker Creek, Starkey Creek and East Potters Creek.
  • Public water: City of Marshall, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Cox Creek in Marshall?

Marshall is in Harrison County, where the Census Bureau Vintage 2024 estimate puts the population at 24,263. Near End Boulevard or along US 59, we install water, sewer, gas, electric conduit and fiber with routes planned beneath the surface. Directional boring can help bring a new service across a street without opening its pavement.

Our main office is in Yukon, Oklahoma, and Marshall work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Jobs can range from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business began in 1965, and we have done directional boring since 1982; those capabilities can suit work along Marshall streets like Victory Drive.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Marshall ground like around Kirvin soil?

The USDA soil survey maps Kirvin across 33 percent of Marshall and Bowie across 21 percent. Kirvin gravelly fine sandy loam, 2 to 5 percent slopes, covers 21 percent; Kirvin very fine sandy loam, 2 to 5 percent slopes, covers 11 percent. Surface textures include fine sandy loam under 37 percent and gravelly fine sandy loam under 32 percent. At about 40 inches below the surface, clay is mapped under 47 percent of the area, while sandy clay loam is mapped under 40 percent. In Marshall, our mapped patterns guide planning, but they are not test borings. Clay can stick to a reamer and grip pipe.

USDA soil survey, inside the Marshall city limitsWhat is mapped
Soil series mappedKirvin 33 percent, Bowie 21 percent, Cuthbert 16 percent, Mooreville 6 percent and Sacul 5 percent
Texture at the surfacefine sandy loam 37 percent, gravelly fine sandy loam 32 percent and very fine sandy loam 18 percent
Texture about 40 inches downclay 47 percent, sandy clay loam 40 percent and loam 6 percent
Engineering class about 40 inches downlean clay (CL) 53 percent, fat clay (CH) 19 percent and clayey sand (SC) 17 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches38 percent of the area (0 percent hard rock, 38 percent weathered rock)
Seasonal water table within 60 inches46 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel63 percent of the area

The USDA soil survey maps bedrock within 60 inches under 38 percent of Marshall, all as weathered bedrock; within 40 inches, it is mapped under 6 percent. Hard bedrock is not mapped within 60 inches. A seasonal water table is mapped within 60 inches under 46 percent, and flood prone soils under 11 percent, so Cox Creek crossing plans should account for wet ground and channel depth. High steel corrosion risk is mapped under 63 percent, a factor for steel casing and tracer wire materials. The Wilcox Group, undivided, of Paleogene age is mapped here and is mostly mudstone, with sand and lignite also described.

How do crews bore Marshall clay near Cox Creek?

Marshall soil mapping shows clay at about 40 inches across 47 percent of the area, with seasonal water table areas also mapped. We use the route, soil and nearby features such as Cox Creek to shape the bore plan.

  1. Kirvin clay can cling to the reamer and swell around pipe, so we use thinner fluid, add polymer and ream in stages before pulling pipe the same day.
  2. Where Marshall’s mapped clay is heavy, we watch fluid returns near paved streets such as End Boulevard to reduce the chance of pressure lifting pavement.
  3. Seasonal water tables are mapped within 60 inches under 46 percent of the city, so Cox Creek area pits may need to stay small and be pumped.
  4. We track the drill head from the surface and log depth and pitch along routes near Loop 390, then pothole marked utilities before drilling close to them.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What is in the way of a new line near Loop 390 in Marshall?

Interstate 20 has 3.8 mapped roadway miles inside Marshall, while US 59 has 17.4, US 80 has 11.0 and Loop 390 has 10.9. A route near these highways may need to pass beneath pavement rather than cut across it. Loop 390 is also the city’s longest named street at 9.11 miles. End Boulevard runs 8.98 miles in the city, and Victory Drive runs 5.71 miles, so service routes there can involve street pavement and existing lines.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate3.8 roadway miles insideState highway office
US 59US highway17.4 roadway miles insideState highway office
US 80US highway11 roadway miles insideState highway office
Loop 390State highway10.9 roadway miles insideState highway office
Texas State Highway 43State highway10.7 roadway miles insideState highway office
FM 31State highway3.7 roadway miles insideState highway office
FM 1997State highway1.8 roadway miles insideState highway office
FM 1998State highway1.3 roadway miles insideState highway office
FM 449State highway1.2 roadway miles insideState highway office
Texas State Highway 154State highway0.1 roadway miles insideState highway office
Union PacificRailroad15.16 track miles insideThe railroad
Cox CreekStream3.46 channel miles insideChecked for Corps of Engineers jurisdiction
Parker CreekStream2.84 channel miles insideChecked for Corps of Engineers jurisdiction
Starkey CreekStream1.36 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 15.16 track miles inside Marshall on its Little Rock and Reisor subdivisions, and Amtrak uses the track. Public mapping identifies 22 street and rail crossings in the city. Cox Creek runs 3.46 channel miles here, and Parker Creek runs 2.84; mapping shows 14 street crossings of named streams. We plan a creek bore to stay below the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Around Marshall, our mapped review shows no lakes or ponds within one mile.

Who approves a bore near Harrison County roads in Marshall?

For work in the right of way of Interstate 20, US 59 or Loop 390, the line owner applies for a TxDOT utility permit through RULIS. The TxDOT Atlanta District reviews the application, and we prepare the bore plan and profile for the utility owner’s filing. TxDOT rules call for boring or tunneling beneath existing highway pavement; the crossing is encased, and rural highway bores extend beneath all travel lanes. Because Marshall is incorporated, we treat its city streets as city property when planning boring work. A Union Pacific track crossing needs an agreement from the railroad, and a Cox Creek crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Marshall near the City of Marshall system?

The City of Marshall public water system uses surface water and reports 10,518 service connections serving 23,091 people. Before a bore near its lines, we hydrovac pothole marked utilities so the drill does not rely on paint alone to judge depth. County electric service reporting names Southwestern Electric Power, Panola-Harrison Electric Cooperative and Upshur Rural Electric Cooperative. We confirm the line owner for the specific address before planning a conduit bore near the City of Marshall system.

Line ownerWhat it isSourceSize
City of MarshallPublic water systemSurface water10,518 connections, 23,091 people served
Southwestern Electric Power, Panola-Harrison Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Harrison CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Marshall’s American Community Survey 2019 to 2023 five year estimates put the median housing year at 1971, informing our underground planning. For Marshall, the survey estimates homes built before 1960 at 32 percent, from 1960 to 1999 at 53 percent, and in 2000 or later at 15 percent, informing our planning. A replacement bore near End Boulevard may need to pass older buried lines, while a newer service may follow a different route. We expose each marked utility on the bore path before the drill approaches it.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

What is near Marshall and Longview?

Marshall is the county seat of Harrison County, covers 29.76 square miles and sits at an elevation of 332 feet. We use Marshall ZIP codes 75672 and 75670 to orient directional boring requests, not to assume a specific worksite. Nesbitt is 6.4 miles northwest, and Scottsville is 6.6 miles east; Hallsville is 12.8 miles west and Jefferson is 15.5 miles north. Longview, the nearest larger city, is 23.8 miles west. From our Yukon yard, Marshall is 369 road miles away and a 7.1 hour drive, a distance that can affect mobilization for work near US 59 or Cox Creek.

Places near Marshall

What would we bore near Victory Drive in Marshall?

  • Highway crossing: A bore beneath Interstate 20 or US 59 can keep the line below existing pavement and avoid an open cut across travel lanes.
  • Water service: A connection near the City of Marshall system may need potholing to expose marked lines before the bore approaches them.
  • Fiber route: A fiber conduit along Victory Drive can be planned beneath pavement, with the route checked for nearby marked utilities.
  • Creek crossing: A Cox Creek bore needs a depth plan that stays below the channel and a check for Corps jurisdiction.
  • Rail crossing: A line beneath Union Pacific track needs the railroad’s agreement and the crossing details it sets.
  • Street replacement: A water or sewer replacement near End Boulevard can use a bore route that avoids cutting the street surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Interstate 20 in Marshall?

For a bore near Interstate 20, send us the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Loop 390 or Cox Creek can change the access and crossing details we need to review. We stay your contact from the first call through the bore log, whichever crew is on site.

Marshall is 369 road miles from Yukon, so mobilization is part of planning a job near Victory Drive. Kirvin clay can affect drilling fluid and reaming, while Cox Creek or Union Pacific crossings add route and exposure work. Price also reflects bore length, pipe or conduit size, pavement, concrete, pits, excavator time and sand backfill. For high profile or emergency work in Marshall, we allow for added planning needs before scheduling. A map pin near Interstate 20 helps us assess those local factors.

Questions people ask about boring in Marshall

Does Trinity take directional boring jobs in Harrison County and Marshall?

Yes. We take directional boring work in Marshall and across Texas, planning each job around its specific scope. Our Yukon office coordinates the work with our own crews and partner drilling contractors we have vetted, so you deal with Trinity from the first call through the bore log. That applies to a route near Harrison County streets such as End Boulevard.

What do older homes and buried lines near End Boulevard mean for a Marshall bore?

Marshall’s American Community Survey 2019 to 2023 estimates give a median housing year of 1971, with 32 percent of homes built before 1960. A replacement route near End Boulevard may encounter existing lines, so we expose marked utilities along the bore path before drilling near them. New services also need a checked route.

Can groundwater or flood prone soil affect bore pits near Cox Creek in Marshall?

It can. A seasonal water table is mapped within 60 inches under 46 percent of Marshall, and flood prone soils under 11 percent. Near Cox Creek, we plan pit placement and crossing depth for wet ground, and may need to pump a pit. Creek crossing planning also checks for Corps jurisdiction.

Does Kirvin soil in Marshall corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk under 63 percent of Marshall. That matters when the line owner selects steel casing or tracer wire materials. HDPE is another pipe option and is not subject to that soil corrosion concern. Kirvin soil mapping helps frame the discussion, but it is not a site specific test.

What ground does a bore pass through in Marshall’s Kirvin soil areas?

The USDA soil survey maps Kirvin under 33 percent of Marshall. At about 40 inches below the surface, clay is mapped under 47 percent and sandy clay loam under 40 percent. Clay can stick to a reamer, so crews adjust fluid and reaming as the bore advances. These figures describe mapped soils, not test borings.

Is there rock near the surface in Marshall?

The USDA soil survey maps bedrock within 60 inches under 38 percent of Marshall, and that mapped bedrock is weathered. Bedrock within 40 inches is mapped under 6 percent; hard bedrock is not mapped within 60 inches. A bore near Cox Creek still needs a site specific route and ground review.

Can I call after hours about an urgent bore near Victory Drive in Marshall?

Yes. We answer Marshall inquiries through Trinity’s phone, where a person is available 24 hours a day at (405) 409-7423. Tell us where the work is near Victory Drive and what line needs to go in. We provide 24 hour emergency response, and the job details help us understand the request.

How early should I request a Texas811 locate for a Marshall bore near Loop 390?

For a bore near Loop 390, make the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If a Marshall start slips more than 14 days past the original notice, we make a new request before work continues. Before continuing boring work in Marshall, we refresh worn or moved marks through Texas811.

What affects the cost of a directional bore near Interstate 20 in Marshall?

In Marshall, we set the price from the job scope, including the specific boring work requested. Near Interstate 20, length, pipe or conduit size, pavement and highway crossing requirements can affect the work. Kirvin clay, Union Pacific track crossings and distance from the Yukon yard also matter. Pits, excavator time, backfill, creek crossings and emergency timing can change the equipment and planning required.

Where the Marshall facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Marshall

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Marshall, Texas

Type the address of your job in Marshall. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Marshall

Same county: Waskom. All counties: Texas county list.