Springlake Texas Directional Boring: Olton Loam, US 385 and US 70
Quick Answer: At the US 70 and US 385 crossroads, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Springlake routes. Dent is the longest named street, and our Yukon, Oklahoma main office is 342 road miles away. US 70 and US 385 run through town, where 6.96 public road miles sit inside the limits. Olton soil is common, and clay loam at about 40 inches can grip a reamer, so we plan staged passes and pipe pull timing.
Springlake bores at a glance
- Incorporated city in Lamb County, Texas. Population 141 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 342 miles, about 6.6 hours of driving.
- Ground: Olton soil is mapped on 40 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 385, US 70 and FM 2080. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Springlake, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near US 385 in Springlake?
Dent is Springlake’s longest named street at 1.03 miles, within 6.96 public road centerline miles; US 70 and US 385 meet through town. The Census Bureau Vintage 2024 estimate puts the Lamb County population at 141. Along Dent, Myrtle Avenue or 2nd Street, we install water, sewer, gas, electric conduit and fiber by bore where the plans call for underground service.
Our main office is in Yukon, Oklahoma, and Springlake work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; around US 385, our range runs from 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet.

What is Springlake ground like around Olton soil?
The USDA soil survey maps Olton soil across 40 percent of Springlake, followed by Portales at 18 percent and Acuff and Zita at 14 percent each. Surface texture is loam across 83 percent of the mapped area and fine sandy loam across 16 percent. At about 40 inches, the survey maps clay loam across 40 percent, loam across 32 percent and sandy clay loam across 27 percent. These are mapped patterns, not test borings, so a bore plan still needs to account for the actual ground along its route.
| USDA soil survey, inside the Springlake city limits | What is mapped |
|---|---|
| Soil series mapped | Olton 40 percent, Portales 18 percent, Acuff 14 percent, Zita 14 percent and Amarillo 12 percent |
| Texture at the surface | loam 83 percent and fine sandy loam 16 percent |
| Texture about 40 inches down | clay loam 40 percent, loam 32 percent and sandy clay loam 27 percent |
| Engineering class about 40 inches down | lean clay (CL) 100 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 41 percent of the area |
Across Olton and Portales ground, bedrock is not mapped in the top five feet, so the map does not point to a shallow rock layer along Dent. The survey also maps no seasonal water table within 60 inches and no flood prone soils. High steel corrosion risk covers 41 percent of the mapped area, a factor for the line owner to consider for steel casing or tracer wire. The Blackwater Draw Formation is Cenozoic sand, fine alluvium and silt; the map also lists Cenozoic sedimentary rocks of Paleocene age.
How do crews bore Springlake clay loam?
Olton loam covers much of Springlake, while the survey maps clay loam at about 40 inches. We plan the bore around that sticky deeper soil and the pavement or services along the route.
- In the Olton soil mapped across 40 percent of Springlake, we use thinner drilling fluid and polymer to help keep sticky clay from building on the reamer.
- Where clay loam is mapped at about 40 inches, we enlarge the bore in stages and time the pipe pull so the open hole does not sit.
- Near US 70 or US 385 pavement, we control fluid pressure and watch returns to avoid lifting the surface as the bore advances.
- Along Dent, we hydrovac each marked utility on the planned path before drilling close; paint gives position, not depth, so we expose the line.

What could a Springlake bore cross near US 385?
US 385 and US 70 each have 1.6 mapped roadway miles inside Springlake, and FM 2080 has 0.4 miles. Dent is the longest named street at 1.03 miles; Myrtle Avenue, 2nd Street and Colorado Avenue are also on the route map. A bore can pass beneath pavement and driveways without cutting their surface, but the chosen path and utility locations determine where entry and exit pits can fit.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 385 | US highway | 1.6 roadway miles inside | State highway office |
| US 70 | US highway | 1.6 roadway miles inside | State highway office |
| FM 2080 | State highway | 0.4 roadway miles inside | State highway office |
Public records show no railroad within Springlake or the surrounding one mile, so there is no mapped local track route to plan around. No named streams or lakes and ponds are mapped inside town or within one mile, and no stream crossings appear on the street map. For a route on Dent or Colorado Avenue, the key crossing checks are therefore the marked underground lines and the road surface rather than a mapped rail or water channel.
Who approves a Springlake bore in Lamb County?
Springlake is incorporated, so its city streets, including Dent and Colorado Avenue, belong to the city itself. Work in the right of way of US 385, US 70 or FM 2080 needs a TxDOT utility permit, reviewed by the TxDOT Lubbock District. The line owning utility files through TxDOT’s RULIS system, and we prepare the bore plan and profile for that application. Under an existing highway, TxDOT requires boring or tunneling; crossing cover depends on line type, with the district able to set a different depth in its permit.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines near the City of Springlake water system?
The City of Springlake owns the public water system, which draws from groundwater wells and serves 247 people through 60 service connections. Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative report electric service in Lamb County. Those countywide reports do not identify the electric line owner at every Dent or Myrtle Avenue address, so we confirm the specific owner before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Springlake | Public water system | Groundwater wells | 60 connections, 247 people served |
| Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Lamb County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Springlake’s median housing year at 1960: 49 percent of units were built before 1960, 46 percent from 1960 to 1999 and 5 percent in 2000 or later. That mix can mean a project on 2nd Street involves replacing an older service or adding a new one; the survey does not identify the buried lines at a specific address. We hydrovac marked utilities on the route before drilling near them, since paint shows position, not depth.

Do you cover Springlake and nearby Earth?
Springlake is in Lamb County, at an elevation of 3,685 feet and with 1.03 square miles of land. ZIP code 79082 covers the town. Earth is 5.9 miles west, Olton is 10.3 miles east, Hart is 15.2 miles northeast, Amherst is 16.4 miles south and Sudan is 16.9 miles southwest. Littlefield, the county seat and nearest larger city, is 21.7 miles south. Our Yukon, Oklahoma main office is 342 road miles away, a 6.6 hour drive, so mobilization is part of planning a Springlake job.
Places near Springlake
- Directional boring in Earth: 5.9 miles west
- Directional boring in Olton: 10.3 miles east
- Directional boring in Hart: 15.2 miles northeast
- Directional boring in Amherst: 16.4 miles south
- Directional boring in Sudan: 16.9 miles southwest
- Directional boring in Littlefield: 21.7 miles south
Which jobs call for a bore along Dent in Springlake?
- Highway crossing: A route beneath US 385 or US 70 can keep pavement intact while the utility passes below the travel lanes.
- Water service: A connection near the City of Springlake system needs a route planned around the existing groundwater well lines.
- Fiber drop: A run along Dent or Myrtle Avenue can carry communications conduit beneath the street surface.
- Electric conduit: Along 2nd Street, we confirm the line owner and conduit requirements before laying out a bore path.
- Street service: A water or sewer line beneath Colorado Avenue can avoid an open cut through the paved route.
- Utility daylighting: Near older homes on Dent, hydrovac potholes expose marked lines before the drill approaches their recorded positions.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Springlake quote near Colorado Avenue?
A map pin matters on Colorado Avenue because a few feet can change which utilities, pavement or private access a bore must work around. Send the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans showing the route and pits help us scope a Springlake crossing.
A route with clear access along Dent and no pavement or utility conflicts is simpler to plan than a crowded crossing. The estimate depends on length, pipe or conduit size, soil, exposed utilities, pavement, pits, excavator time and backfill. Olton soil can affect reaming, while crossing US 385 can add highway permit and cover requirements. The 342 road miles from Yukon also affect mobilization, and emergency or high profile work can add planning demands.
Questions people ask about boring in Springlake
Does Trinity take directional boring work in Springlake and Lamb County, and who staffs it?
Yes. We take Springlake work in Lamb County using our own crews and vetted partner drilling contractors at satellite yards. Trinity remains your contact from the first call through the bore log, whether the route runs near Dent or crosses US 385.
What soil does a Springlake bore pass through around Olton?
The USDA soil survey maps Olton soil across 40 percent of Springlake. At about 40 inches, clay loam is mapped across 40 percent of the area, with loam and sandy clay loam also present. That deeper clay can cling to the reamer, so staged reaming and careful fluid control matter.
Will a Springlake bore run into rock?
The soil survey does not map bedrock in Springlake’s top five feet, though that does not settle conditions at greater depth. The geologic map identifies the Blackwater Draw Formation, with sand, fine alluvium and silt, and also lists Cenozoic sedimentary rocks of Paleocene age. Site conditions along a Dent route still need consideration.
Who approves a Springlake bore under US 385?
TxDOT reviews a utility permit for work in the US 385 right of way through its Lubbock District. The utility owner files in RULIS, while we provide the bore plan and profile. TxDOT’s cover rules depend on the line type, and the permit can set a different depth.
Who runs Springlake’s water system, and where does its water come from?
The City of Springlake owns the public water system, and its source is groundwater wells. Public records list 60 service connections serving 247 people. A bore near a water connection on Myrtle Avenue still needs a route planned around the existing buried lines.
Which electric company owns the lines at a Springlake address in Lamb County?
The line owner varies by address and must be confirmed before we plan an electric conduit bore. Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative report service in Lamb County, but those reports do not identify the provider at every 2nd Street property.
Can I reach Trinity after hours about an urgent bore near Springlake 2nd Street?
Yes. Call (405) 409-7423; a person answers 24 hours a day. For an urgent route near 2nd Street, tell us the location and what line or conduit needs to go in so we can discuss the work and response.
How early should I call Texas811 for a Springlake bore near Dent?
Request locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. Texas811 describes this as at least two working days. If work near Dent slips more than 14 days past the original notice, make a new request; refresh worn or moved marks before continuing.
What affects the price of directional boring under US 385 in Springlake?
The route scope drives the estimate: length, pipe or conduit size, soil, utilities that must be exposed, pavement, pits, excavation and backfill all matter. A US 385 crossing can add permit planning, while Olton soil can affect the drilling approach. Mobilization also reflects the 342 road miles from Yukon.
Where the Springlake facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Springlake
- U.S. Census Bureau, TIGER/Line 2024: Springlake boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Springlake
- U.S. Census Bureau, American Community Survey 2019 to 2023: Springlake housing units and year built
- Macrostrat geologic map compilation: map units under Springlake
- U.S. EPA Safe Drinking Water Information System: public water systems serving Springlake
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lamb County
- U.S. Geological Survey, Elevation Point Query Service: Springlake elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Springlake
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Springlake
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Springlake, Texas
Type the address of your job in Springlake. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Springlake
Same county: Spade. All counties: Texas county list.
