Littlefield Texas Directional Boring: Amarillo Fine Sandy Loam, US 84 and BNSF Railway
Quick Answer: Need a line beneath US 84 without opening the pavement? We use directional boring, also called horizontal directional drilling (HDD), for Littlefield routes under that highway. Littlefield is 364 road miles from our Yukon, Oklahoma main office, so mobilization is part of planning a BNSF Railway crossing. Amarillo soil covers 59 percent of the city, and its fine sandy loam surface can give way to sticky soil deeper down. We plan the fluid and reaming for the mapped ground along your route.
Littlefield bores at a glance
- County seat of Lamb County, Texas. Population 5,740 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 364 miles, about 7 hours of driving.
- Ground: Amarillo soil is mapped on 59 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 84, US 385, Loop 430 and FM 54. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
- Public water: City of Littlefield, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Littlefield and Lamb County?
Need a line beneath Marshall Howard Boulevard without cutting the street? We take directional boring work in Littlefield, the Lamb County seat. The Census Bureau Vintage 2024 estimate puts Littlefield at 5,740 people, helping us frame underground work for the community. Along streets such as Marshall Howard Boulevard or Delano Avenue, our crews can install water, sewer, gas, electric conduit or fiber by bore, with the route and existing lines shaping the plan.
Our main office is in Yukon, Oklahoma, and Littlefield work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982, after our family business started in 1965. Those four decades of boring matter on Littlefield routes where Amarillo fine sandy loam gives way to clay richer soil below.

What ground does Littlefield’s Amarillo soil map show?
The USDA soil survey maps Amarillo soil across 59 percent of Littlefield, with Olton at 20 percent and Midessa at 8 percent. The leading surface map unit is Amarillo fine sandy loam, covering 48 percent of the city. About 40 inches down, 71 percent of mapped soil is sandy clay loam, and average clay content at that depth is 29 percent. Those are mapped patterns, not test borings. For a bore, the finer, clay bearing soil can stay around the tooling and become sticky, so the fluid and reaming plan matters.
| USDA soil survey, inside the Littlefield city limits | What is mapped |
|---|---|
| Soil series mapped | Amarillo 59 percent, Olton 20 percent, Midessa 8 percent, Acuff 5 percent and Randall 3 percent |
| Texture at the surface | fine sandy loam 69 percent, loam 28 percent and clay 3 percent |
| Texture about 40 inches down | sandy clay loam 71 percent, clay loam 20 percent and loam 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 96 percent and fat clay (CH) 3 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 3 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 23 percent of the area |
Bedrock is not mapped in Littlefield’s top five feet, but that does not rule out deeper rock. Seasonal water tables are mapped within 60 inches in 3 percent of the area, while flood prone soils are not mapped. High steel corrosion risk is mapped across 23 percent, a concern to discuss for steel casing and tracer wire; the line owner selects materials. The Blackwater Draw Formation is Cenozoic and includes sand, silt and locally clayey material, so the USDA map is a starting point, not a site test.
How do we bore Littlefield’s sandy clay loam while planning an underground path for that soil?
Littlefield’s sandy clay loam at about 40 inches and its fine sandy loam surface call for a plan that controls fluid and keeps the hole supported. We adjust the approach to the route and field conditions.
- With sandy clay loam mapped at about 40 inches, we choose fluid and reaming steps to limit sticky soil packing around the tooling.
- Amarillo fine sandy loam covers much of Littlefield; we stage the reaming and have the pipe ready before opening the final hole.
- Every marked utility along a Littlefield bore path gets exposed by hydrovac before the drill approaches; surface marks show position, not depth.
- We follow the drill head from the surface and log depth and pitch, with Littlefield’s clay bearing soils in mind as the bore advances.

Which roads or tracks might a Littlefield bore cross near Marshall Howard Boulevard?
US 84 and US 385 run inside Littlefield, along with Loop 430 and FM 54, so a route can involve state highway right of way. Marshall Howard Boulevard is the longest named street at 12.37 miles in the city. Delano Avenue runs 5.08 miles, and Delano Street runs 3.34 miles. A bore can pass beneath pavement rather than cut across it, but the route, cover and right of way limits need to be checked for the particular crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 84 | US highway | 12.7 roadway miles inside | State highway office |
| US 385 | US highway | 3.8 roadway miles inside | State highway office |
| Loop 430 | State highway | 5.1 roadway miles inside | State highway office |
| FM 54 | State highway | 2.3 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 7.34 track miles inside | The railroad |
BNSF Railway has 7.34 track miles inside Littlefield, and public mapping shows 5 street and rail crossings in the city. A bore beneath its track requires an agreement with BNSF Railway, which sets crossing conditions such as casing, depth and flagging. No streams or lakes are mapped inside the city, and no street crossings of named streams are mapped. That means the mapped route does not show a local creek crossing to plan around.
Who approves a Littlefield bore under US 84?
The cover depth sets how far a bore runs below US 84: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches at a highway crossing. Pressurized sewer lines also need 60 inches there. TxDOT reviews the utility permit through its Lubbock District, and the utility owner files in the online RULIS system; we prepare the bore plan and profile for that application. Existing highway pavement is bored or tunneled beneath, with highway crossings encased. A BNSF Railway route also needs an agreement with the railroad that sets its crossing conditions.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines near the City of Littlefield water system?
The City of Littlefield public water system draws from groundwater wells and reports 2,358 service connections serving 5,943 people. That water infrastructure matters when planning a nearby bore on Marshall Howard Boulevard or another city street. Electric service reported in Lamb County includes Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative. We confirm the owner of the specific line before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Littlefield | Public water system | Groundwater wells | 2,358 connections, 5,943 people served |
| Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Lamb County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Littlefield’s median housing year at 1967; 27 percent of units were built before 1960, and 7 percent in 2000 or later. That age range can mean replacement work near older services as well as new connections. For a line beneath Delano Avenue, we hydrovac pothole each marked utility on the bore path before drilling near it, since locate marks do not show depth.

What is near Littlefield, with Levelland to the south?
Littlefield is the Lamb County seat, at an elevation of 3,561 feet across 6.28 square miles. Its ZIP code is 79339. Amherst is 7.9 miles northwest, Spade is 10.4 miles east, Anton is 12.4 miles southeast, Whitharral is 12.4 miles south and Sudan is 14.9 miles northwest. Levelland, the nearest larger city, is 23.4 miles south. From our Yukon yard, the drive to Littlefield is 364 road miles and 7.0 hours, a distance that affects mobilization for work near US 84 or BNSF Railway.
Places near Littlefield
- Directional boring in Amherst: 7.9 miles northwest
- Directional boring in Spade: 10.4 miles east
- Directional boring in Anton: 12.4 miles southeast
- Directional boring in Whitharral: 12.4 miles south
- Directional boring in Sudan: 14.9 miles northwest
- Directional boring in Levelland: 23.4 miles south
What kinds of bores fit Littlefield routes near Delano Avenue?
- Highway crossing: A route beneath US 84 can keep a new water or fiber line out of the paved surface, subject to the TxDOT utility permit.
- Water service: A bore near the City of Littlefield system can connect a service without trenching across Marshall Howard Boulevard.
- Fiber route: Delano Avenue offers a named corridor where a conduit bore can pass beneath pavement and marked services.
- Rail crossing: A route beneath BNSF Railway needs the railroad’s agreement before casing, depth and flagging details are set.
- Electric conduit: Near US 385, we confirm the specific line owner before planning a conduit route through the city.
- Sewer line: A pressurized sewer bore crossing US 84 needs the required highway cover and an encased crossing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Littlefield bore near 1st Street?
For a Littlefield quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near 1st Street may cross existing services or pavement, so the exact path matters. A map pin also helps us see whether the work approaches US 84 or BNSF Railway.
Littlefield is 364 road miles from Yukon, so mobilization is part of pricing before the drill reaches the site. Amarillo fine sandy loam and the clay bearing soil mapped below it affect drilling and fluid needs. The number of utilities crossed and exposed, pavement or concrete, and any BNSF Railway crossing also change the work. Pit size, excavator time, sand backfill and a high profile or emergency schedule can add to the scope.
Questions people ask about boring in Littlefield
Does Trinity Boring Solutions take directional boring work in Littlefield and Lamb County?
Yes. We take work in Littlefield and across Texas, and the crew arrangement depends on the job. Our own crews work alongside partner contractor crews from satellite yards that Trinity has vetted. You deal with Trinity through the bore log, whether the route is near Delano Avenue or elsewhere in Lamb County.
Who approves a Littlefield bore beneath US 84?
TxDOT handles the utility permit for US 84 through its Lubbock District. The utility owner submits the application in the RULIS system, and we provide the bore plan and profile for it. The cover required at the US 84 crossing depends on the line type and the approved permit.
What does a Littlefield bore under BNSF Railway require us to plan for at the railroad crossing?
BNSF Railway owns the 7.34 track miles mapped inside Littlefield. A crossing needs an agreement from the railroad, and that agreement sets details such as casing, depth and flagging. If the route also lies on highway right of way, TxDOT asks for a copy of the railroad agreement.
Who runs Littlefield’s public water system and where does its water come from so we can plan boring around that system?
The City of Littlefield owns the public water system, which uses groundwater wells. Public records list 2,358 service connections and 5,943 people served, figures we use when planning underground work in Littlefield. That network is a key set of existing lines to locate before a bore near Marshall Howard Boulevard or another city street.
Who owns electric lines in Littlefield and Lamb County, and who confirms conduit specs?
Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative report service in Lamb County. Those records do not identify the provider at every Littlefield address. We confirm the owner of the specific line before planning a conduit bore and check the conduit requirements with that owner.
Who controls Littlefield streets like Delano Street, and does a bore cut the road?
Littlefield is incorporated, so we plan city street boring around the city’s control of those streets. Directional boring can carry a line under Delano Street without cutting the pavement; the entry and exit pits sit in dirt on either side. The route still needs to account for marked utilities beneath the street.
How far is Littlefield from Yukon, and does Levelland change the job plan?
From our Yukon, Oklahoma main office, Littlefield is 364 road miles and a 7.0 hour drive, shaping how we schedule mobilization. Levelland is 23.4 miles south of Littlefield, but the Yukon distance is what affects mobilization. We factor that travel into planning a bore near US 84 or another local route.
How early should I call 811 for a Littlefield bore near Marshall Howard Boulevard?
Contact Texas811 at least 48 hours before digging, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before work. If a Marshall Howard Boulevard start slips more than 14 days past the original notice, make a new request. Before we continue work in Littlefield, we have worn or moved marks refreshed through Texas811.
What affects directional boring costs near US 84 in Littlefield, including highway crossing conditions we must plan around?
The job details drive the price: footage, pipe or conduit size, soil, crossings, pavement, pits and equipment time all matter. Amarillo fine sandy loam and the clay bearing soil below it affect the drilling plan, while a US 84 crossing adds highway permit and cover needs. The 364 road miles from Yukon shape how we schedule mobilization for directional boring work in Littlefield.
Where the Littlefield facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Littlefield
- U.S. Census Bureau, TIGER/Line 2024: Littlefield boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Littlefield
- U.S. Census Bureau, American Community Survey 2019 to 2023: Littlefield housing units and year built
- Macrostrat geologic map compilation: map units under Littlefield
- U.S. EPA Safe Drinking Water Information System: public water systems serving Littlefield
- U.S. Department of Transportation, North American Rail Network: track owners in Lamb County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lamb County
- U.S. Geological Survey, Elevation Point Query Service: Littlefield elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Littlefield
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Littlefield
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Littlefield, Texas
Type the address of your job in Littlefield. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Littlefield
Same county: Olton · Earth · Springlake. All counties: Texas county list.
