trinityboringsolutions.com

Hallettsville Texas Directional Boring: Straber Soil, Reckaway Branch and US 77

Quick Answer: City of Hallettsville owns the groundwater based water system and the municipal electric system, so we confirm the line owner before a bore near either network. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes beneath Reckaway Branch and Hallettsville streets. Hallettsville is 455 road miles from our Yukon yard, a mobilization detail for work near US 77. Straber loamy fine sand is mapped across 30 percent of the city, while sandy clay loam at about 40 inches can hold a reamed hole and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hallettsville bores at a glance

  • County seat of Lavaca County, Texas. Population 2,745 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 455 miles, about 9 hours of driving.
  • Ground: Straber soil is mapped on 30 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 4 percent of the area.
  • Highways inside the boundary: US 77, US 90, FM 957, FM 318 and FM 530. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Reckaway Branch and Lavaca River.
  • Public water: City of Hallettsville, groundwater wells.
  • Electric: City of Hallettsville municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Hallettsville and Lavaca County?

We take directional boring work in Hallettsville, the Lavaca County seat. The Census Bureau Vintage 2024 estimate lists 2,745 residents; we use that context when planning underground work in Lavaca County. Along Main Street, 4th Street or a US 77 route, our crews can install water, sewer, gas, electric conduit and fiber lines. The owner of an existing line matters because it must be identified before a new route is planned.

Our main office is in Yukon, Oklahoma, and Hallettsville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa, showing the reach behind a crew planning a shorter route near Texana Street. We are a family business started in 1965, with directional boring work dating to 1982.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Straber soil like to bore in Hallettsville?

The USDA soil survey maps Straber loamy fine sand across 30 percent of Hallettsville and Dubina loamy fine sand across 26 percent. Hallettsville fine sandy loam accounts for another 26 percent. At about 40 inches below the surface, sandy clay loam covers 54 percent of the mapped area and sandy clay covers 30 percent. Straber and Dubina map patterns guide our preliminary bore planning, but we do not treat them as test borings. The mix means the bit may move readily in upper sandy ground, then meet stickier material that can cling to a reamer or pipe.

USDA soil survey, inside the Hallettsville city limitsWhat is mapped
Soil series mappedStraber 30 percent, Dubina 26 percent, Hallettsville 26 percent, Navaca 6 percent and Denhawken 4 percent
Texture at the surfaceloamy fine sand 58 percent, fine sandy loam 26 percent and clay 6 percent
Texture about 40 inches downsandy clay loam 54 percent, sandy clay 30 percent and fine sandy loam 6 percent
Engineering class about 40 inches downclayey sand (SC) 62 percent, lean clay (CL) 29 percent and fat clay (CH) 5 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inches4 percent of the area (0 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches36 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel41 percent of the area

The USDA survey maps a seasonal water table within 60 inches across 36 percent of Hallettsville, so pits near Reckaway Branch may need pumping and room for wet ground. Flood prone soils cover 6 percent. Bedrock is mapped within 60 inches across 4 percent, with a typical mapped depth of 32 inches; the local Fleming Formation is Miocene clay and sandstone, so a route may slow where weathered rock occurs. High steel corrosion risk covers 41 percent, a reason for the line owner to consider casing and tracer wire materials.

How do we plan a bore through Hallettsville’s sandy clay loam where the Hallettsville series is mapped?

Hallettsville’s mapped ground changes with depth, from loamy fine sand near the surface to sandy clay loam around 40 inches. We match drilling fluid and reaming to the ground along each route.

  1. Where Straber loamy fine sand is present, we use drilling fluid to help hold the bore open, stage the reaming, and have the pipe ready for the final pull.
  2. Sandy clay loam is mapped around 40 inches in much of Hallettsville, so we adjust fluid and reaming to limit sticky buildup on the tool and pipe.
  3. Near mapped seasonal water table areas, including routes toward Reckaway Branch, we keep pits small and plan to pump water if the excavation fills.
  4. The drill head is tracked from the surface while depth and pitch are logged, especially where Fleming Formation clay and sandstone may change drilling resistance.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross in Hallettsville near Reckaway Branch?

US 77 accounts for 6.5 mapped roadway miles inside Hallettsville, and US 90 adds 2.7 miles. FM 957, FM 318 and FM 530 also run within the city limits. TxDOT pavement on those highways is not a place for an open cut without the required district approval. Among named streets, Texana Street runs 2.12 miles in the city, Main Street 1.66 miles and 4th Street 1.43 miles. Their pavement and driveway crossings are reasons to plan a bore path and pits before equipment arrives.

CrossingTypeMapped extentWho has a say
US 77US highway6.5 roadway miles insideState highway office
US 90US highway2.7 roadway miles insideState highway office
FM 957State highway0.9 roadway miles insideState highway office
FM 318State highway0.1 roadway miles insideState highway office
FM 530State highway0.1 roadway miles insideState highway office
Reckaway BranchStream1.64 channel miles insideChecked for Corps of Engineers jurisdiction
Lavaca RiverStream1.19 channel miles insideChecked for Corps of Engineers jurisdiction
East Campbell BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Campbell BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
West Campbell BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Adams BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Hallettsville or within one mile outside the limits, so the mapped street and rail crossing count is none. Reckaway Branch runs 1.64 channel miles in the city and the Lavaca River runs 1.19 miles; six street crossings of named streams are mapped. With no lakes or ponds mapped within one mile, we still review the Lavaca River corridor when planning a bore in Hallettsville. A route near either stream needs planning for channel depth and a check for federal waterway jurisdiction.

Whose permission does a Hallettsville bore under US 77 need?

US 77 belongs to TxDOT, and the TxDOT Yoakum District reviews a utility permit for work in its right of way. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with required cover set by line type and the permit. Hallettsville’s city streets belong to the city itself. A Reckaway Branch or Lavaca River crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. No railroad is mapped in the city.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Hallettsville system?

The City of Hallettsville public water system uses groundwater wells and reports 1,521 service connections serving 2,733 people. The city also owns the municipal electric system. A proposed water or conduit bore near US 77 still needs the line owner confirmed for the exact route, since ownership determines which existing facilities must be considered before drilling.

Line ownerWhat it isSourceSize
City of HallettsvillePublic water systemGroundwater wells1,521 connections, 2,733 people served
City of Hallettsville municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration1,655 customers reported
Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative, Jackson Electric Cooperative and San Bernard Electric CooperativeElectric utilities reporting service in Lavaca CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Hallettsville’s median housing year at 1966; 42 percent of homes were built before 1960, while 13 percent date to 2000 or later. Older homes can mean replacement work on Main Street, while newer service routes may add lines. Near Texana Street, we hydrovac pothole every marked utility on the bore path before drilling close by. For a line under Main Street, that means exposing marked lines first because paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Hallettsville and nearby Yoakum?

Hallettsville is the Lavaca County seat, at an elevation of 220 feet across 2.73 square miles. ZIP code 77964 serves Hallettsville, and we use that service area detail when organizing underground work in Lavaca County. Shiner is 13.9 miles west, Moulton is 15.1 miles northwest, and Yoakum is 16.0 miles southwest; Yoakum is the nearest larger city. Schulenburg lies 16.6 miles north and Sheridan 16.9 miles east. Our Yukon, Oklahoma yard is 455 road miles away, about a 9.0 hour drive, so distance can affect mobilization for a route along US 77.

Places near Hallettsville

What boring work comes up in Hallettsville near 4th Street?

  • Water service: A service route near the City of Hallettsville system can connect along 4th Street without opening the full paved surface.
  • Highway crossing: A utility route under US 77 needs a bore plan that fits TxDOT right of way requirements and the line owner’s permit.
  • Fiber conduit: A conduit run along Texana Street can be planned around street pavement and the existing utility route.
  • Creek crossing: A route at Reckaway Branch needs channel depth planning and a jurisdiction check during project planning.
  • Electric conduit: The city owns its municipal electric system, so confirm the line owner before planning a conduit route near Main Street.
  • Sewer replacement: A route near Hallettsville City Park can be laid out to avoid cutting pavement or sidewalks along the way.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Hallettsville’s Texana Street?

For a route near Texana Street, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. Those details let us lay out the route and identify nearby pavement, existing utilities or stream crossings before we set the scope.

A short route through accessible Straber ground with few crossings is simpler to plan than a route with difficult access. The answer changes with footage, pipe or conduit size, soil and rock, utilities to expose, pavement, pits and excavator time. Reckaway Branch may add crossing planning, while work in US 77 right of way needs a TxDOT permit. Mobilization also reflects the 455 road miles from Yukon, and high profile or emergency work can add planning demands.

Questions people ask about boring in Hallettsville

Does Trinity take directional boring work in Hallettsville and Lavaca County?

Yes. We take Hallettsville work with our own crews and partner contractor crews from vetted satellite yards, while Trinity manages the job from the first call through the bore log. For a Lavaca County route near US 77, we plan the bore around the location, utility owner and ground conditions.

Who controls Hallettsville 4th Street, and does a bore mean cutting it?

Because Hallettsville is incorporated, we coordinate street crossing plans for Main Street with the city. A bore can pass beneath 4th Street without opening the street surface; entry and exit pits still need space, and marked utilities along the route must be exposed before drilling near them.

Could older Hallettsville lines near Main Street need replacement bores?

They could. The American Community Survey 2019 to 2023 estimates put the median housing year at 1966, with 42 percent of homes built before 1960. Housing age does not establish pipe age, so we locate and expose marked lines near Main Street before planning a replacement route.

Can water or flood prone ground affect bore pits near Hallettsville’s Reckaway Branch?

Yes. The USDA soil survey maps a seasonal water table within 60 inches across 36 percent of Hallettsville and flood prone soils across 6 percent. Near Reckaway Branch, we plan pit placement and pumping for wet ground, and check creek crossing jurisdiction during planning.

Does Straber soil in Hallettsville corrode steel, and what pipe is used?

The soil survey maps high steel corrosion risk across 41 percent of Hallettsville, but that does not determine the material for a specific route. The line owner selects pipe, casing and tracer wire materials; HDPE does not share the steel corrosion concern mapped in Straber areas.

What ground does a Hallettsville bore pass through in Straber soil?

The USDA survey maps Straber loamy fine sand across 30 percent of Hallettsville. Around 40 inches below the surface, sandy clay loam is mapped across 54 percent and sandy clay across 30 percent. Those patterns suggest the ground may change from easier cutting to stickier material.

How much 811 notice does a Hallettsville bore near Texana Street need?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. A ticket has a 20 day life from the planned start; if the start slips more than 14 days past the original notice, request a new ticket. If marks near Ridge Street are worn or moved, we have them refreshed through Texas811 before work continues.

How far is Hallettsville from the Yukon office, and does Yoakum help with mobilization?

Hallettsville is 455 road miles and a 9.0 hour drive from our Yukon, Oklahoma yard. Yoakum is 16.0 miles southwest and is the nearest larger city, but the Yukon distance still matters when we plan crew and equipment mobilization for work around US 77.

How do we scope costs for a directional bore under US 77 in Hallettsville around TxDOT Yoakum District permitting?

The route and scope determine the price, not the highway name alone. Length, pipe size, soil and rock, utilities to expose, pavement, creek crossings, pits, excavator time and mobilization all matter. A US 77 right of way route adds permit planning, while Reckaway Branch or sticky sandy clay loam can change the drilling plan.

Where the Hallettsville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hallettsville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hallettsville, Texas

Type the address of your job in Hallettsville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hallettsville

All counties: Texas county list.