Sheridan Texas Directional Boring: Cheetham Loamy Sand, US 90 Alternate, West Sandy Creek
Quick Answer: Can your line pass under US 90 Alternate or West Sandy Creek without cutting across the surface? We use directional boring, also called horizontal directional drilling (HDD), for Sheridan, Texas crossings like these. The Yukon, Oklahoma main office is 466 road miles from Lola Oak Lane, so distance is part of planning mobilization. Cheetham soil covers 68% of Sheridan, and sandy ground can fall in behind the drill, so staged reaming helps keep the bore open.
Sheridan bores at a glance
- Unincorporated community in Colorado County, Texas. Population 520 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 466 miles, about 9.4 hours of driving.
- Ground: Cheetham soil is mapped on 68 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 90 Alternate and FM 2437. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: West Sandy Creek, Sand Branch, Crooked Creek and Urmey Branch.
- Public water: Sheridan Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call to bore beneath West Sandy Creek in Sheridan?
We take directional boring work in Sheridan, Colorado County, where the Census Bureau counted 520 people in the 2020 Census. A water service near Lake Sheridan, fiber along County Road 235, or electric conduit crossing West Sandy Creek may call for a bore that keeps the surface intact. We also install sewer and gas lines, with the route and size setting the plan.
Our main office is in Yukon, Oklahoma, and Sheridan work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982. That experience ranges from a 3/4 inch service line near Lola Oak Lane to 48 inch casing for a larger crossing such as US 90 Alternate.

What does the soil survey show about Sheridan and Cheetham soil?
The USDA soil survey maps Cheetham soil across 68% of Sheridan, with Cheetham loamy sand on 1 to 3 percent slopes as the leading map unit. Surface texture is loamy sand across 71% of the mapped area. At about 40 inches below the surface, 76% is mapped as sandy clay loam, while the average clay content there is 24%. These are mapped soil patterns, not test borings. The sandy upper ground can cut easily but may cave behind the bit, so the drilling fluid and reaming sequence matter.
| USDA soil survey, inside the Sheridan mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Cheetham 68 percent, Tremona 10 percent, Robco 8 percent, Zalco 6 percent and Mockley 4 percent |
| Texture at the surface | loamy sand 71 percent, fine sand 9 percent and loamy fine sand 8 percent |
| Texture about 40 inches down | sandy clay loam 76 percent, sandy clay 14 percent and fine sand 6 percent |
| Engineering class about 40 inches down | clayey sand (SC) 72 percent, fat clay (CH) 10 percent and lean clay (CL) 8 percent |
| Average clay content about 40 inches down | 24 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 85 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 27 percent of the area |
Bedrock is not mapped within the top five feet in Sheridan, but that map does not settle conditions at greater depth. Seasonal water tables are mapped within 60 inches across 85% of the area, so pits near West Sandy Creek may need pumping. Flood prone soils cover 6%, making a creek route a depth planning issue. High steel corrosion risk is mapped across 27%, a consideration for casing and tracer wire. The Willis Formation, of Pliocene age, includes clay, silt, sand and gravel, so the route may meet changing material.
How do we bore Sheridan’s sandy clay loam?
Sheridan’s loamy sand surface and sandy clay loam at about 40 inches call for a bore plan that keeps loose ground supported. We match the fluid, reaming sequence and pit setup to the route.
- Cheetham loamy sand is common at the surface, so we use drilling fluid and staged reaming to help hold the loose bore open.
- With sandy clay loam mapped at about 40 inches, we watch returns as the ground changes and set the pullback timing to suit the hole.
- Seasonal water tables mapped within 60 inches across 85% of Sheridan can fill pits near West Sandy Creek, so we plan small pits and pumping.
- Before a bore near County Road 235, we hydrovac expose each marked utility on the route; the surface paint does not show its depth.

What is in the way of a new line in Sheridan near US 90 Alternate?
US 90 Alternate has 3.0 mapped roadway miles inside the Sheridan community boundary, while FM 2437 has 1.2. US 90 runs along or touches the boundary. A crossing under either named highway needs a route and profile that fit the right of way. County Road 235, Lola Oak Lane and County Road 273 Road are among the longest named streets, so a bore can keep pavement and driveways uncut when the alignment and access allow it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 90 Alternate | US highway | 3 roadway miles inside | State highway office |
| FM 2437 | State highway | 1.2 roadway miles inside | State highway office |
| US 90 | Highway nearby | Runs along or touches the city limits | State highway office |
| West Sandy Creek | Stream | 2.16 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sand Branch | Stream | 0.97 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Crooked Creek | Stream | 0.92 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Urmey Branch | Stream | 0.21 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sawmill Branch | Stream | 0.09 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Middle Sandy Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Parker Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Coppers Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| East Ragsdale Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Sheridan | Lake or pond | 121 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Sheridan or within 1 mile outside the community, and none of the mapped street and rail crossings are present. West Sandy Creek runs 2.16 channel miles inside the boundary; Sand Branch and Crooked Creek add other named water routes. Public mapping shows 9 street crossings of named streams. Lake Sheridan covers 121 acres, so a route near a creek or lake needs water crossing review during planning.
Who approves a Sheridan bore in Colorado County?
Sheridan is an unincorporated community, so it has no city government: County Road 235 and County Road 273 Road are county roads, while US 90 Alternate and FM 2437 are state routes. TxDOT’s Yoakum District reviews right of way work on the named highways. The utility owner, not the contractor, submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the owner’s permit. TxDOT rules call for boring or tunneling beneath an existing highway. A route under West Sandy Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near Sheridan Water Supply Corporation?
Sheridan Water Supply Corporation is the local government owned public water system. Its groundwater wells serve 414 people through 138 service connections. A proposed water service near Lake Sheridan should be coordinated with the system before the bore route is set. Electric utilities reporting service in Colorado County are AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative. We confirm the line owner before planning conduit work along Lola Oak Lane.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Sheridan Water Supply Corporation | Public water system | Groundwater wells | 138 connections, 414 people served |
| AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative | Electric utilities reporting service in Colorado County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Sheridan’s median housing year at 1986; 33% of housing was built before 1960, and 29% in 2000 or later. That mix can mean a replacement route past older homes as well as new services near County Road 235. Before drilling near any marked utility, we hydrovac pothole it to expose the line; paint shows position, not depth.

Do you cover Sheridan and nearby Rock Island?
Sheridan is in Colorado County, covers 5.35 square miles and sits at 287 feet elevation. Its ZIP code is 77475. Rock Island is 6.4 miles east, Glidden is 13.8 miles north, Weimar is 14.5 miles northwest, and Columbus is 14.9 miles northeast. Columbus is also the county seat. Yoakum, the nearest larger city listed, is 32.3 miles southwest. From the Yukon, Oklahoma main office, Sheridan is 466 road miles away and about 9.4 drive hours, a distance that can shape crew mobilization for a bore near US 90 Alternate.
Places near Sheridan
- Directional boring in Rock Island: 6.4 miles east
- Directional boring in Glidden: 13.8 miles north
- Directional boring in Weimar: 14.5 miles northwest
- Directional boring in Columbus: 14.9 miles northeast
- Directional boring in Garwood: 16.3 miles east
- Directional boring in Yoakum: 32.3 miles southwest
What boring work comes up near County Road 235 in Sheridan?
- Highway crossing: A bore under US 90 Alternate can keep the existing road surface intact while the line passes beneath its travel lanes.
- Water service: A service near Lake Sheridan can connect to the Sheridan Water Supply Corporation groundwater system without opening the full street route.
- Fiber route: A conduit bore along County Road 235 can pass beneath driveways and paved sections rather than cutting across them.
- Creek crossing: A route under West Sandy Creek needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Street crossing: A bore near County Road 273 Road can avoid an open cut where the route and utility clearances allow it.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near Lola Oak Lane in Sheridan?
For a route near Lola Oak Lane, tell us where the work is, what goes underground, the pipe or conduit size, and the footage. A map pin helps place a crossing against a street or creek; a sketch or plans can show a turn near County Road 235. Those details let us assess the route and access before setting the work scope.
A clear route with room for pits near County Road 235 is simpler to plan than a tight crossing at US 90 Alternate or West Sandy Creek. Price depends on length, pipe size, soil, utilities to expose, pavement, creek crossings, pits, excavator time and sand backfill. Sheridan’s loamy sand, seasonal water table and 466 road miles from Yukon can affect drilling setup, pit work and mobilization. High profile or emergency work can also add planning needs.
Questions people ask about boring in Sheridan
Does Trinity Boring Solutions take directional boring jobs in Sheridan, Colorado County?
Yes. We take Sheridan work in Colorado County with our own crews and partner contractor satellite yards that we have vetted. You work with Trinity from the first call through the bore log, regardless of which crew is on site. We can discuss a line under US 90 Alternate or a route near West Sandy Creek.
Who runs Sheridan’s water system, and where does its water come from?
Sheridan Water Supply Corporation runs the public water system, which draws from groundwater wells. The system serves 414 people through 138 service connections. If a new service near Lake Sheridan needs a bore, the water system’s route and connection point help define the work.
Which electric utilities report service in Sheridan, Colorado County, and who confirms conduit specs?
AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative report service in Colorado County. That list does not identify the provider at every address. For a conduit bore near County Road 235, confirm the line owner and specifications for that location before planning.
Who controls County Road 273 Road in Sheridan, and does a bore require cutting it?
Sheridan has no city government, so County Road 273 Road is not a city street. A directional bore can pass beneath the road without an open cut when the route, access and clearances work. The road owner and the utility owner need to be considered as the crossing is planned.
How old are Sheridan’s buried lines near County Road 235, and what does that mean for replacement bores?
Public housing estimates put the median year built at 1986, with 33% of homes built before 1960 and 29% built in 2000 or later. Those housing ages do not date the buried lines, but they point to both older services and newer connections near County Road 235. We expose marked utilities before drilling close to them.
Can groundwater or flood prone ground affect bore pits near West Sandy Creek in Sheridan?
Yes. Seasonal water tables are mapped within 60 inches across 85% of Sheridan, and flood prone soils cover 6%. Near West Sandy Creek, water can fill pits or loosen sandy ground, so pit placement and pumping need to be considered. Creek crossing plans are also checked for federal jurisdiction.
Can I reach Trinity after hours about an urgent bore on County Road 273 Road in Sheridan?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423. Tell us if the urgent work is near County Road 273 Road and what line needs to go in. The address, route and utility details help us understand the scope and response needed.
How much Texas811 notice do I need for a Sheridan bore near Lola Oak Lane?
Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If a Lola Oak Lane bore starts more than 14 days after the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a directional bore under US 90 Alternate in Sheridan?
The job scope sets the price, including bore length, pipe or conduit size, ground, utilities to expose, pavement, creek crossings, pits and excavator time. A US 90 Alternate crossing may need different planning than a short service near Lola Oak Lane. Sheridan’s sandy ground and distance from the Yukon yard can also affect the setup and mobilization.
Where the Sheridan facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Sheridan
- U.S. Census Bureau, TIGER/Line 2024: Sheridan boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Sheridan population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Sheridan housing units and year built
- Macrostrat geologic map compilation: map units under Sheridan
- U.S. EPA Safe Drinking Water Information System: public water systems serving Sheridan
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Colorado County
- U.S. Geological Survey, Elevation Point Query Service: Sheridan elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Sheridan
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Sheridan
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Sheridan, Texas
Type the address of your job in Sheridan. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Sheridan
Same county: Eagle Lake · Nada. All counties: Texas county list.
