Olton Texas Directional Boring: Loam, US 70 and Avenue A
Quick Answer: Olton is a small incorporated city, so its streets belong to the city; we do directional boring, also called horizontal directional drilling (HDD), for lines crossing US 70. The Yukon main office is 351 road miles away, and Avenue A helps define local access and setup. USDA soil survey maps Olton loam across 59 percent of the city. Clay loam below the surface can grip the pipe, so staged reaming and controlled fluid matter.
Olton bores at a glance
- Incorporated city in Lamb County, Texas. Population 1,933 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 351 miles, about 6.7 hours of driving.
- Ground: Olton soil is mapped on 59 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 70 and FM 168. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Olton, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring under US 70 in Olton?
Olton is a small incorporated city in Lamb County, and the Census Bureau Vintage 2024 estimate puts its population at 1,933. We install water, sewer, gas, electric conduit and fiber lines for routes such as service connections along Avenue A or a crossing near US 70. The city setting means the street owner is the city, while US 70 is a state highway.
Our main office is in Yukon, Oklahoma, and Olton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Avenue A service work can use lines from 3/4 inch, while a larger US 70 crossing may call for casing up to 48 inch. Our family business started in 1965, and we have done directional boring since 1982, with bore lengths from 10 feet to 5,000 feet.

What kind of ground does Olton soil bring to a bore?
The USDA soil survey maps Olton loam across 59 percent of Olton, with Amarillo fine sandy loam also present. At about 40 inches, clay loam covers 60 percent of the mapped area and sandy clay loam 27 percent; average clay content at that depth is 36 percent. Our maps name the Olton soil series as a pattern, not as a test boring at the proposed route. Clay can hold the hole open, but sticky cuttings can build on a reamer and swelling ground can grip pipe. We plan fluid and reaming around that behavior.
| USDA soil survey, inside the Olton city limits | What is mapped |
|---|---|
| Soil series mapped | Olton 59 percent, Amarillo 24 percent, Randall 8 percent, Zita 4 percent and Acuff 3 percent |
| Texture at the surface | loam 62 percent, fine sandy loam 29 percent and clay 8 percent |
| Texture about 40 inches down | clay loam 60 percent, sandy clay loam 27 percent and clay 9 percent |
| Engineering class about 40 inches down | lean clay (CL) 91 percent and fat clay (CH) 9 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 9 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 68 percent of the area |
Bedrock is not mapped in the top five feet of Olton, which does not rule out deeper rock. The USDA survey maps a seasonal water table within 60 inches across 9 percent of the area, so pits may need pumping. We use the Olton soil series as mapped context, while flood prone soils are not mapped. High steel corrosion risk covers 68 percent, a concern for uncoated casing and tracer wire; the line owner chooses materials. The Blackwater Draw Formation, a Cenozoic unit of sand, silt and locally clayey material, is mapped here.
What does it take to bore Olton clay loam?
Olton clay loam can stay open but stick to the reamer and grip the pipe. On a route near 9th Street, we match fluid, reaming stages and pull timing to the ground we encounter.
- Olton’s clay loam at about 40 inches can cling to the reamer, so we use staged passes and fluid suited to sticky cuttings before pulling pipe.
- With 36 percent average clay at that depth, pressure near Avenue A pavement needs close control so drilling fluid does not lift the surface.
- We track the drill head from the surface and log depth and pitch along 9th Street, where marked utility positions do not show burial depth.
- The mapped seasonal water table within 60 inches across 9 percent of Olton can fill pits, so we plan compact pits and pumping where needed.

Where does a line have to go under 9th Street in Olton?
US 70 runs for 1.1 mapped roadway miles inside Olton, and FM 168 for 2.1 miles. There are no mapped highways within 1.5 miles outside the city limits. Among local streets, 9th Street measures 1.32 miles, Avenue East 1.3 miles and Avenue A 1.27 miles. A route under US 70 or one of these streets needs a bore plan that accounts for pavement and nearby utilities, rather than an open cut through the travel surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 70 | US highway | 1.1 roadway miles inside | State highway office |
| FM 168 | State highway | 2.1 roadway miles inside | State highway office |
No railroad is mapped inside Olton or within one mile outside it, so there is no mapped track route to cross. The city also has no mapped street and rail crossings. Named streams and lakes or ponds are not mapped in or within one mile of the limits, and no street crossings of named streams are mapped. That leaves US 70, FM 168 and the street network as the main mapped crossing constraints for a local route.
Who has to sign off on a bore under US 70 in Olton?
US 70 and FM 168 are state routes, so work in their right of way goes through TxDOT, not the city street process. The TxDOT Lubbock District reviews the utility permit. The utility that owns the line files in TxDOT’s RULIS system; we prepare the bore plan and profile and work under the owner’s permit. For a US 70 crossing, TxDOT rules call for boring or tunneling beneath existing pavement, casing, and a bore extending beneath all rural highway travel lanes. The permit may set different cover depths.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Olton and Lamb County?
In Lamb County, the City of Olton system serves 1,953 people through 900 service connections using groundwater wells, which we consider when planning underground work. That gives a water bore near Avenue East a local system to coordinate with, though the exact line route still needs confirmation. Utilities reporting electric service in Lamb County include Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative. On 9th Street, we confirm the line owner for the exact address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Olton | Public water system | Groundwater wells | 900 connections, 1,953 people served |
| Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Lamb County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Olton’s median housing year at 1966; 37 percent of homes were built before 1960, while 16 percent date from 2000 or later. Those ages can guide questions about replacement lines, but do not establish the age of a buried pipe. New service and replacement routes near Avenue East need the actual utilities exposed. We hydrovac pothole each marked line on the bore path before drilling near it; for example, a proposed crossing beneath Avenue East needs its marked lines checked for depth.

What is near Olton, including Hart?
Olton is in Lamb County, at an elevation of 3,612 feet, and covers 1.36 square miles. ZIP code 79064 covers the city. Springlake is 10.3 miles west, Hart is 14.3 miles north, and Edmonson is 15.3 miles northeast. Littlefield, the county seat and nearest larger city, is 21.3 miles southwest. From the Yukon, Oklahoma main office, the road distance is 351 miles and the drive is 6.7 hours, a mobilization factor for work near US 70 or FM 168.
Places near Olton
- Directional boring in Springlake: 10.3 miles west
- Directional boring in Hart: 14.3 miles north
- Directional boring in Edmonson: 15.3 miles northeast
- Directional boring in Earth: 16 miles west
- Directional boring in Spade: 17.6 miles south
- Directional boring in Littlefield: 21.3 miles southwest
What kinds of bores come up near Avenue A in Olton?
- Highway crossing: A line beneath US 70 needs a bore planned for the highway travel lanes and the utility owner’s TxDOT permit.
- Street service: A water or sewer route along Avenue A can pass beneath pavement without opening a trench through the street.
- Fiber conduit: A route crossing 9th Street can keep the conduit underground while the street surface remains intact.
- Water connection: A service near Avenue East can be planned around the City of Olton groundwater system and confirmed line locations.
- Electric conduit: A crossing near Avenue B starts with confirming which Lamb County reporting utility owns the line at that address.
- FM crossing: A route beneath FM 168 needs coordination for the state highway right of way and its pavement.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near Avenue B in Olton?
A map pin matters because a route under Avenue B has different pavement, access and utility conflicts than a crossing near US 70. For a route near Avenue East, we need the address or pin, what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us see the route, entry and exit pits, and any crossings before we scope the work.
Mobilization starts with the 351 road miles from Yukon, then the ground and route shape the job. Olton clay loam can affect reaming and pull timing; crossings of US 70 or FM 168 add permit and pavement planning. Price also reflects line size and length, utilities to expose, pavement or concrete, pits, excavator time, sand backfill, drainage crossings, and high profile or emergency work. The route and site conditions determine what equipment and crew time the bore needs.
Questions people ask about boring in Olton
Does Trinity Boring Solutions take directional boring work in Lamb County near Olton?
Yes. We take directional boring work in Olton and across Texas, with our own crews and partner contractor satellite yards that Trinity has vetted. The main office is in Yukon, and you deal with Trinity from the first call through the bore log, including work near US 70.
Does the TxDOT Lubbock District permit office approve a bore under US 70 in Olton?
TxDOT reviews a utility permit for a bore in the US 70 right of way through its Lubbock District. The line owning utility files the application in RULIS, and we provide the bore plan and profile for that filing. The city street process does not replace the state highway permit.
Within Lamb County, who runs Olton’s public water system, and where does its water come from?
As an incorporated city, Olton owns its public water system, and groundwater wells supply it. The system has 900 service connections and serves 1,953 people. For a proposed water line near Avenue East, confirm the existing route with the city system before setting bore pits.
Which electric utility should I check for an Olton job in Lamb County?
Confirm the line owner at the job address before planning an electric conduit bore. Utilities reporting service in Lamb County include Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative. An Avenue A address cannot be assigned to one provider from countywide reporting alone.
Does Olton or the county control Avenue A, and does it need to be cut?
Because Olton is incorporated, we coordinate street bores with the city on Avenue B. A line beneath Avenue A can be installed by boring instead of cutting across the pavement, subject to the route and utility locations. The street owner and any separate highway owner must be considered for the specific crossing.
What do Olton housing ages near Avenue East mean for replacement bores?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1966, with 37 percent built before 1960. That can make replacement work a relevant planning question, but housing age does not date buried lines. Near Avenue East, expose marked utilities before drilling close to them.
What bore sizes and lengths can Trinity handle for a job near Avenue B in Olton?
We handle lines from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right size and length for a route near Avenue B depends on what the line carries, the crossing and the site access.
How much 811 notice does an Olton bore near 9th Street need?
Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Marks near 9th Street show position, not depth. If the start moves more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work resumes.
What affects the cost of directional boring under US 70 in Olton?
The route length and line size matter, along with Olton’s clay loam, utilities to expose, pavement, pits and equipment time. A US 70 crossing adds highway planning, and mobilization reflects the 351 road miles from Yukon. Creek or drainage crossings and emergency timing can also change the scope.
Where the Olton facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Olton
- U.S. Census Bureau, TIGER/Line 2024: Olton boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Olton
- U.S. Census Bureau, American Community Survey 2019 to 2023: Olton housing units and year built
- Macrostrat geologic map compilation: map units under Olton
- U.S. EPA Safe Drinking Water Information System: public water systems serving Olton
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lamb County
- U.S. Geological Survey, Elevation Point Query Service: Olton elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Olton
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Olton
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Olton, Texas
Type the address of your job in Olton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Olton
Same county: Sudan · Amherst. All counties: Texas county list.
