trinityboringsolutions.com

Shiner Texas Directional Boring: Carbengle Loam, Boggy Creek, Union Pacific Track

Quick Answer: Shiner is a small incorporated city in Lavaca County, so its city streets belong to the city; a bore near US 90 may pass beneath a public road. We take directional boring, also called horizontal directional drilling (HDD), for crossings such as Boggy Creek and Union Pacific track in Shiner. Shiner is 480 road miles from our Yukon, Oklahoma main office, with Avenue East among the routes a plan may follow. Carbengle soil is common in Shiner, and clay at depth can grip a reamer or pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Shiner bores at a glance

  • Incorporated city in Lavaca County, Texas. Population 2,163 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 480 miles, about 9.2 hours of driving.
  • Ground: Carbengle soil is mapped on 32 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 32 percent of the area.
  • Highways inside the boundary: US 90, Texas State Highway 95, FM 3435 and FM 966. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: Union Pacific, with 9 mapped street and rail crossings.
  • Named streams inside the boundary: Boggy Creek, Rocky Creek and Green-Dickson Lake.
  • Public water: City of Shiner, groundwater wells.
  • Electric: City of Shiner municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Shiner near US 90?

Shiner is an incorporated city in Lavaca County with a Census Bureau Vintage 2024 estimate of 2,163 people. We install water, sewer, gas, electric conduit and fiber lines, including routes beneath US 90 or along Avenue East. The city owns its streets, so a bore plan needs to account for the road and the line route together.

Our main office is in Yukon, Oklahoma, and Shiner work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Work can range from a 3/4 inch service line near Avenue B to 48 inch casing for a major crossing. For planning underground work in Shiner, our family business began in 1965 and has done directional boring since 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does Carbengle soil mean for a bore in Shiner?

The USDA soil survey maps Carbengle as 32 percent of Shiner’s soil series, with Carbengle loam on 3 to 5 percent slopes covering 21 percent of the mapped area. Cuero sandy clay loam covers 25 percent. At about 40 inches below the surface, the survey maps bedrock in 32 percent of the area, clay in 29 percent and sandy clay loam in 26 percent. Surface texture is clay across 42 percent and loam across 32 percent. These are mapped patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Shiner city limitsWhat is mapped
Soil series mappedCarbengle 32 percent, Cuero 25 percent, Bleiblerville 15 percent, Navaca 13 percent and Branyon 12 percent
Texture at the surfaceclay 42 percent, loam 32 percent and sandy clay loam 25 percent
Texture about 40 inches downbedrock 32 percent, clay 29 percent and sandy clay loam 26 percent
Engineering class about 40 inches downclayey sand (SC) 37 percent and fat clay (CH) 29 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches32 percent of the area (0 percent hard rock, 32 percent weathered rock)
Seasonal water table within 60 inches13 percent of the area
Flood prone soils13 percent of the area
High corrosion risk for uncoated steel42 percent of the area

Bedrock is mapped within five feet across 32 percent of Shiner, and the mapped material is weathered rather than hard bedrock. That can slow a bore where the bit meets rock, and the soil to rock change can affect steering. Seasonal water table and flood prone soils each appear in 13 percent of the mapped area, so pits near Boggy Creek need attention to water and depth. In Shiner, high steel corrosion risk is mapped across 42 percent, so we account for corrosion when considering underground materials. The Oakville Sandstone unit is Miocene in age; the line owner should consider steel casing and tracer wire materials.

How do we bore Shiner’s mapped bedrock ground?

On a Shiner route, we match the drilling setup to the soil survey and check the actual path. Carbengle loam and mapped weathered bedrock call for controlled reaming, measured steering and a pull plan that fits the ground.

  1. On Carbengle clay, we use a thinner drilling fluid and staged reaming so sticky cuttings do not build up on the reamer.
  2. Where Shiner’s map shows bedrock within five feet, we track depth and pitch through the soil to rock transition and adjust the drilling pace.
  3. Before drilling near a marked line along Avenue East, we hydrovac pothole it; surface paint shows location, not burial depth.
  4. At a Boggy Creek route, we plan the bore beneath the channel, manage water in the pits and check jurisdiction during planning.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What could a new line cross in Shiner near Boggy Creek?

US 90 has 1.9 mapped roadway miles inside Shiner, while Texas State Highway 95 has 1.2, FM 3435 has 0.7 and FM 966 has 0.2. These routes can put highway right of way into a bore plan. Avenue East is the longest named street at 1.73 miles, followed by Avenue B at 1.5 and Avenue H at 1.37. A bore along those city streets needs a route that fits the existing pavement and buried lines.

CrossingTypeMapped extentWho has a say
US 90US highway1.9 roadway miles insideState highway office
Texas State Highway 95State highway1.2 roadway miles insideState highway office
FM 3435State highway0.7 roadway miles insideState highway office
FM 966State highway0.2 roadway miles insideState highway office
Union PacificRailroad1.83 track miles insideThe railroad
Boggy CreekStream1.5 channel miles insideChecked for Corps of Engineers jurisdiction
Rocky CreekStream0.87 channel miles insideChecked for Corps of Engineers jurisdiction
Green-Dickson LakeStream0.36 channel miles insideChecked for Corps of Engineers jurisdiction
Green-Dickson LakeLake or pond5 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.83 track miles inside Shiner, and the city map shows nine street and rail crossings. Any proposed track crossing needs an agreement with Union Pacific before the route is set. Boggy Creek runs 1.5 channel miles through the city, and Rocky Creek runs 0.87; seven mapped street crossings intersect named streams. Green-Dickson Lake is also within the city. A creek or lake route is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a bore in Shiner in Lavaca County?

A bore under US 90, Texas State Highway 95, FM 3435 or FM 966 needs a TxDOT utility permit for work in the highway right of way. The TxDOT Yoakum District reviews it. The utility owner, not the drilling contractor, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. City streets such as Avenue East belong to the City of Shiner. A Union Pacific track crossing needs the railroad’s agreement, and a Boggy Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines should we check near the City of Shiner system?

The City of Shiner public water system uses groundwater wells and reports 1,259 service connections serving 2,127 people. The city also owns its municipal electric system, which reports 1,409 customers. Those records identify systems in Shiner, but a proposed conduit route still needs the line owner confirmed before the bore is planned. That check matters along streets such as Avenue G, where the route may encounter existing services.

Line ownerWhat it isSourceSize
City of ShinerPublic water systemGroundwater wells1,259 connections, 2,127 people served
City of Shiner municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration1,409 customers reported
Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative, Jackson Electric Cooperative and San Bernard Electric CooperativeElectric utilities reporting service in Lavaca CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Shiner’s median housing year at 1964; 45 percent of homes were built before 1960, and 17 percent in 2000 or later. That mix can mean replacing an older service or adding a line for newer construction near Avenue H. Before the drill approaches any marked utility, we expose it with hydrovac potholing; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Shiner from Moulton and our Yukon yard?

Shiner is in Lavaca County, covers 2.47 square miles and sits at 375 feet elevation. We check Shiner addresses against ZIP code 77984 when coordinating underground work. Moulton is 9.7 miles north, and Yoakum is 9.8 miles south; Hallettsville, the county seat, is 13.9 miles east. Shiner is 480 road miles and a 9.2 hour drive from our Yukon, Oklahoma yard. That distance matters when planning mobilization for a bore near US 90 or Boggy Creek.

Places near Shiner

What bores might fit Shiner’s Avenue East?

  • Highway crossing: A line beneath US 90 needs a bore plan that accounts for the highway right of way and existing pavement.
  • Water service: A connection near Avenue East can tie into the City of Shiner system after the route and existing services are checked.
  • Fiber route: A conduit run along Avenue B can be planned around marked lines and the street’s buried utility path.
  • Creek crossing: A route beneath Boggy Creek needs depth planning below the channel and a jurisdiction check during planning.
  • Rail crossing: A proposed bore under Union Pacific track needs the railroad agreement to set crossing conditions.
  • Park service: A line near Green-Dickson Municipal Park can be routed with pits on each side rather than cutting pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Shiner bore near Avenue G?

For a route near Avenue G, send the address or map pin first. Tell us what will go underground, such as water or fiber, then give the pipe or conduit size and footage. A sketch or plans help show whether the route reaches US 90, crosses a marked utility or needs a creek approach near Boggy Creek.

The job route and scope set the price. Carbengle clay and the area’s mapped weathered bedrock affect drilling time; crossings of US 90 or Union Pacific track add planning and coordination. Creek crossings, pavement, concrete, exposed utilities, pits, sand backfill and excavator time also shape the work. Shiner’s 480 road miles from Yukon affect mobilization, while a high profile or emergency schedule can change the required resources.

Questions people ask about boring in Shiner

Does Trinity take directional boring work in Shiner and Lavaca County?

Yes. Trinity Boring Solutions takes work across Texas, including Shiner in Lavaca County. Our own crews and vetted partner drilling contractors handle the work from satellite yards, while you deal with Trinity from the first call through the bore log. A route near US 90 can be planned around the highway and the marked utilities on its path.

Does Carbengle soil in Shiner mean steel pipe will corrode?

The soil survey maps high steel corrosion risk across 42 percent of Shiner, so steel casing and tracer wire deserve attention in the design. For underground work in Shiner, we use HDPE without that soil corrosion concern. The line owner selects any coating or material requirements for a route through Carbengle soil near Avenue B.

What ground does a Shiner bore pass through in Carbengle soil?

The USDA soil survey maps Carbengle across 32 percent of Shiner’s soil series. At about 40 inches down, it maps bedrock in 32 percent of the area, clay in 29 percent and sandy clay loam in 26 percent. Those are mapped soil patterns, not test borings, so a route near Avenue East still needs field checks.

How much bedrock is mapped in the top five feet of Shiner?

Bedrock is mapped within 60 inches across 32 percent of Shiner, and the mapped bedrock is weathered. In Shiner, hard bedrock is not mapped within that depth, which we consider when planning bore depths. The soil to rock boundary can still affect steering, so a bore near Boggy Creek needs depth and pitch checks as drilling advances.

Who approves a Shiner bore under US 90?

TxDOT reviews a US 90 utility permit through the Yoakum District when work occupies highway right of way. The utility owner files the application in RULIS, and we prepare the bore plan and profile for the owner’s filing. TxDOT rules require boring or tunneling beneath existing highway pavement.

For a Shiner bore beneath Union Pacific track, what crossing requirements should we confirm before work begins?

A proposed crossing of the 1.83 Union Pacific track miles inside Shiner needs an agreement from Union Pacific. The railroad sets crossing conditions such as casing, depth and flagging. The city map records nine street and rail crossings, so the exact route matters before planning a crossing near Avenue East.

Can I reach Trinity after hours about an urgent Shiner bore on Avenue H?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, including for an urgent scope near Avenue H. We can discuss what the line is, the route and whether the work involves pavement, a marked utility or a crossing such as US 90.

How early should I call Texas811 for a Shiner bore along Avenue East?

For a bore along Avenue East, the party arranging excavation should request locates from Texas811 at least 48 hours before work, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days past the notice, make a new request. Before underground work continues in Shiner, we refresh marks if they are worn or moved.

Near US 90, what site conditions and crossing requirements affect our directional boring cost in Shiner?

The route, length, pipe size, Carbengle soil, mapped weathered bedrock and the number of utilities to expose all affect the scope. Pavement or a US 90 crossing can add work, as can Boggy Creek, pits and excavator time. Mobilization from the Yukon yard also matters because Shiner is 480 road miles away.

Where the Shiner facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Shiner

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Shiner, Texas

Type the address of your job in Shiner. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Shiner

All counties: Texas county list.