Hallettsville Texas Directional Boring: Straber Soil, Reckaway Branch and US 77
Quick Answer: City of Hallettsville owns the groundwater based water system and the municipal electric system, so we confirm the line owner before a bore near either network. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes beneath Reckaway Branch and Hallettsville streets. Hallettsville is 455 road miles from our Yukon yard, a mobilization detail for work near US 77. Straber loamy fine sand is mapped across 30 percent of the city, while sandy clay loam at about 40 inches can hold a reamed hole and grip pipe.
Hallettsville bores at a glance
- County seat of Lavaca County, Texas. Population 2,745 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 455 miles, about 9 hours of driving.
- Ground: Straber soil is mapped on 30 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 4 percent of the area.
- Highways inside the boundary: US 77, US 90, FM 957, FM 318 and FM 530. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Reckaway Branch and Lavaca River.
- Public water: City of Hallettsville, groundwater wells.
- Electric: City of Hallettsville municipal electric system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring in Hallettsville and Lavaca County?
We take directional boring work in Hallettsville, the Lavaca County seat. The Census Bureau Vintage 2024 estimate lists 2,745 residents; we use that context when planning underground work in Lavaca County. Along Main Street, 4th Street or a US 77 route, our crews can install water, sewer, gas, electric conduit and fiber lines. The owner of an existing line matters because it must be identified before a new route is planned.
Our main office is in Yukon, Oklahoma, and Hallettsville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa, showing the reach behind a crew planning a shorter route near Texana Street. We are a family business started in 1965, with directional boring work dating to 1982.

What is Straber soil like to bore in Hallettsville?
The USDA soil survey maps Straber loamy fine sand across 30 percent of Hallettsville and Dubina loamy fine sand across 26 percent. Hallettsville fine sandy loam accounts for another 26 percent. At about 40 inches below the surface, sandy clay loam covers 54 percent of the mapped area and sandy clay covers 30 percent. Straber and Dubina map patterns guide our preliminary bore planning, but we do not treat them as test borings. The mix means the bit may move readily in upper sandy ground, then meet stickier material that can cling to a reamer or pipe.
| USDA soil survey, inside the Hallettsville city limits | What is mapped |
|---|---|
| Soil series mapped | Straber 30 percent, Dubina 26 percent, Hallettsville 26 percent, Navaca 6 percent and Denhawken 4 percent |
| Texture at the surface | loamy fine sand 58 percent, fine sandy loam 26 percent and clay 6 percent |
| Texture about 40 inches down | sandy clay loam 54 percent, sandy clay 30 percent and fine sandy loam 6 percent |
| Engineering class about 40 inches down | clayey sand (SC) 62 percent, lean clay (CL) 29 percent and fat clay (CH) 5 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | 4 percent of the area (0 percent hard rock, 4 percent weathered rock) |
| Seasonal water table within 60 inches | 36 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 41 percent of the area |
The USDA survey maps a seasonal water table within 60 inches across 36 percent of Hallettsville, so pits near Reckaway Branch may need pumping and room for wet ground. Flood prone soils cover 6 percent. Bedrock is mapped within 60 inches across 4 percent, with a typical mapped depth of 32 inches; the local Fleming Formation is Miocene clay and sandstone, so a route may slow where weathered rock occurs. High steel corrosion risk covers 41 percent, a reason for the line owner to consider casing and tracer wire materials.
How do we plan a bore through Hallettsville’s sandy clay loam where the Hallettsville series is mapped?
Hallettsville’s mapped ground changes with depth, from loamy fine sand near the surface to sandy clay loam around 40 inches. We match drilling fluid and reaming to the ground along each route.
- Where Straber loamy fine sand is present, we use drilling fluid to help hold the bore open, stage the reaming, and have the pipe ready for the final pull.
- Sandy clay loam is mapped around 40 inches in much of Hallettsville, so we adjust fluid and reaming to limit sticky buildup on the tool and pipe.
- Near mapped seasonal water table areas, including routes toward Reckaway Branch, we keep pits small and plan to pump water if the excavation fills.
- The drill head is tracked from the surface while depth and pitch are logged, especially where Fleming Formation clay and sandstone may change drilling resistance.

What does a bore have to cross in Hallettsville near Reckaway Branch?
US 77 accounts for 6.5 mapped roadway miles inside Hallettsville, and US 90 adds 2.7 miles. FM 957, FM 318 and FM 530 also run within the city limits. TxDOT pavement on those highways is not a place for an open cut without the required district approval. Among named streets, Texana Street runs 2.12 miles in the city, Main Street 1.66 miles and 4th Street 1.43 miles. Their pavement and driveway crossings are reasons to plan a bore path and pits before equipment arrives.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 77 | US highway | 6.5 roadway miles inside | State highway office |
| US 90 | US highway | 2.7 roadway miles inside | State highway office |
| FM 957 | State highway | 0.9 roadway miles inside | State highway office |
| FM 318 | State highway | 0.1 roadway miles inside | State highway office |
| FM 530 | State highway | 0.1 roadway miles inside | State highway office |
| Reckaway Branch | Stream | 1.64 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Lavaca River | Stream | 1.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| East Campbell Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Campbell Branch | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| West Campbell Branch | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Adams Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Hallettsville or within one mile outside the limits, so the mapped street and rail crossing count is none. Reckaway Branch runs 1.64 channel miles in the city and the Lavaca River runs 1.19 miles; six street crossings of named streams are mapped. With no lakes or ponds mapped within one mile, we still review the Lavaca River corridor when planning a bore in Hallettsville. A route near either stream needs planning for channel depth and a check for federal waterway jurisdiction.
Whose permission does a Hallettsville bore under US 77 need?
US 77 belongs to TxDOT, and the TxDOT Yoakum District reviews a utility permit for work in its right of way. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with required cover set by line type and the permit. Hallettsville’s city streets belong to the city itself. A Reckaway Branch or Lavaca River crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. No railroad is mapped in the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near the City of Hallettsville system?
The City of Hallettsville public water system uses groundwater wells and reports 1,521 service connections serving 2,733 people. The city also owns the municipal electric system. A proposed water or conduit bore near US 77 still needs the line owner confirmed for the exact route, since ownership determines which existing facilities must be considered before drilling.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Hallettsville | Public water system | Groundwater wells | 1,521 connections, 2,733 people served |
| City of Hallettsville municipal electric system | City owned electric system | Reports to the U.S. Energy Information Administration | 1,655 customers reported |
| Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative, Jackson Electric Cooperative and San Bernard Electric Cooperative | Electric utilities reporting service in Lavaca County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Hallettsville’s median housing year at 1966; 42 percent of homes were built before 1960, while 13 percent date to 2000 or later. Older homes can mean replacement work on Main Street, while newer service routes may add lines. Near Texana Street, we hydrovac pothole every marked utility on the bore path before drilling close by. For a line under Main Street, that means exposing marked lines first because paint shows position, not depth.

Do you cover Hallettsville and nearby Yoakum?
Hallettsville is the Lavaca County seat, at an elevation of 220 feet across 2.73 square miles. ZIP code 77964 serves Hallettsville, and we use that service area detail when organizing underground work in Lavaca County. Shiner is 13.9 miles west, Moulton is 15.1 miles northwest, and Yoakum is 16.0 miles southwest; Yoakum is the nearest larger city. Schulenburg lies 16.6 miles north and Sheridan 16.9 miles east. Our Yukon, Oklahoma yard is 455 road miles away, about a 9.0 hour drive, so distance can affect mobilization for a route along US 77.
Places near Hallettsville
- Directional boring in Shiner: 13.9 miles west
- Directional boring in Moulton: 15.1 miles northwest
- Directional boring in Yoakum: 16 miles southwest
- Directional boring in Schulenburg: 16.6 miles north
- Directional boring in Sheridan: 16.9 miles east
What boring work comes up in Hallettsville near 4th Street?
- Water service: A service route near the City of Hallettsville system can connect along 4th Street without opening the full paved surface.
- Highway crossing: A utility route under US 77 needs a bore plan that fits TxDOT right of way requirements and the line owner’s permit.
- Fiber conduit: A conduit run along Texana Street can be planned around street pavement and the existing utility route.
- Creek crossing: A route at Reckaway Branch needs channel depth planning and a jurisdiction check during project planning.
- Electric conduit: The city owns its municipal electric system, so confirm the line owner before planning a conduit route near Main Street.
- Sewer replacement: A route near Hallettsville City Park can be laid out to avoid cutting pavement or sidewalks along the way.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Hallettsville’s Texana Street?
For a route near Texana Street, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. Those details let us lay out the route and identify nearby pavement, existing utilities or stream crossings before we set the scope.
A short route through accessible Straber ground with few crossings is simpler to plan than a route with difficult access. The answer changes with footage, pipe or conduit size, soil and rock, utilities to expose, pavement, pits and excavator time. Reckaway Branch may add crossing planning, while work in US 77 right of way needs a TxDOT permit. Mobilization also reflects the 455 road miles from Yukon, and high profile or emergency work can add planning demands.
Questions people ask about boring in Hallettsville
Does Trinity take directional boring work in Hallettsville and Lavaca County?
Yes. We take Hallettsville work with our own crews and partner contractor crews from vetted satellite yards, while Trinity manages the job from the first call through the bore log. For a Lavaca County route near US 77, we plan the bore around the location, utility owner and ground conditions.
Who controls Hallettsville 4th Street, and does a bore mean cutting it?
Because Hallettsville is incorporated, we coordinate street crossing plans for Main Street with the city. A bore can pass beneath 4th Street without opening the street surface; entry and exit pits still need space, and marked utilities along the route must be exposed before drilling near them.
Could older Hallettsville lines near Main Street need replacement bores?
They could. The American Community Survey 2019 to 2023 estimates put the median housing year at 1966, with 42 percent of homes built before 1960. Housing age does not establish pipe age, so we locate and expose marked lines near Main Street before planning a replacement route.
Can water or flood prone ground affect bore pits near Hallettsville’s Reckaway Branch?
Yes. The USDA soil survey maps a seasonal water table within 60 inches across 36 percent of Hallettsville and flood prone soils across 6 percent. Near Reckaway Branch, we plan pit placement and pumping for wet ground, and check creek crossing jurisdiction during planning.
Does Straber soil in Hallettsville corrode steel, and what pipe is used?
The soil survey maps high steel corrosion risk across 41 percent of Hallettsville, but that does not determine the material for a specific route. The line owner selects pipe, casing and tracer wire materials; HDPE does not share the steel corrosion concern mapped in Straber areas.
What ground does a Hallettsville bore pass through in Straber soil?
The USDA survey maps Straber loamy fine sand across 30 percent of Hallettsville. Around 40 inches below the surface, sandy clay loam is mapped across 54 percent and sandy clay across 30 percent. Those patterns suggest the ground may change from easier cutting to stickier material.
How much 811 notice does a Hallettsville bore near Texana Street need?
Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. A ticket has a 20 day life from the planned start; if the start slips more than 14 days past the original notice, request a new ticket. If marks near Ridge Street are worn or moved, we have them refreshed through Texas811 before work continues.
How far is Hallettsville from the Yukon office, and does Yoakum help with mobilization?
Hallettsville is 455 road miles and a 9.0 hour drive from our Yukon, Oklahoma yard. Yoakum is 16.0 miles southwest and is the nearest larger city, but the Yukon distance still matters when we plan crew and equipment mobilization for work around US 77.
How do we scope costs for a directional bore under US 77 in Hallettsville around TxDOT Yoakum District permitting?
The route and scope determine the price, not the highway name alone. Length, pipe size, soil and rock, utilities to expose, pavement, creek crossings, pits, excavator time and mobilization all matter. A US 77 right of way route adds permit planning, while Reckaway Branch or sticky sandy clay loam can change the drilling plan.
Where the Hallettsville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Hallettsville
- U.S. Census Bureau, TIGER/Line 2024: Hallettsville boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Hallettsville
- U.S. Census Bureau, American Community Survey 2019 to 2023: Hallettsville housing units and year built
- Macrostrat geologic map compilation: map units under Hallettsville
- U.S. EPA Safe Drinking Water Information System: public water systems serving Hallettsville
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lavaca County
- U.S. Geological Survey, Elevation Point Query Service: Hallettsville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Hallettsville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Hallettsville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Hallettsville, Texas
Type the address of your job in Hallettsville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Hallettsville
All counties: Texas county list.
