trinityboringsolutions.com

Amherst Texas Directional Boring: Amarillo Soil, US 84 and BNSF Railway

Quick Answer: Main Street, Henderson Avenue and Madison Avenue shape Amherst, where Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), including routes beneath the BNSF Railway. Our Yukon main office is 358 road miles away, with US 84 and FM 37 among the local routes shaping access and mobilization. Amarillo soil dominates the map; sandy clay loam below can hold a bore open but cling to the reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Amherst bores at a glance

  • Incorporated city in Lamb County, Texas. Population 641 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 358 miles, about 7 hours of driving.
  • Ground: Amarillo soil is mapped on 97 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 84, FM 37 and FM 1055. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway, with 1 mapped street and rail crossings.
  • Public water: City of Amherst, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near US 84 in Amherst?

Trinity Boring Solutions takes directional boring work in Amherst, Lamb County, where the Census Bureau Vintage 2024 estimate puts the population at 641. We install water, sewer, gas, electric conduit and fiber, with routes planned beneath Main Street, Henderson Avenue or the US 84 corridor as the job requires.

Our main office is in Yukon, Oklahoma, and Amherst work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. That reach sits beside shorter service and conduit routes a property along Madison Avenue may need. We have been a family business since 1965 and have done directional boring since 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Amarillo soil like to bore in Amherst?

The USDA soil survey maps Amarillo soil across 97 percent of Amherst. Fine sandy loam is the surface texture across 98 percent, while sandy clay loam is mapped under about 97 percent of the area at 40 inches below ground. The mapped soil at that depth is classified as CL, with average clay content of 25 percent. These are mapped patterns, not test borings, so a route near FM 37 still needs to be judged against site conditions. The clay in the profile can keep the hole standing, but it can also stick to the reamer and grip the pipe.

USDA soil survey, inside the Amherst city limitsWhat is mapped
Soil series mappedAmarillo 97 percent
Texture at the surfacefine sandy loam 98 percent
Texture about 40 inches downsandy clay loam 97 percent
Engineering class about 40 inches downlean clay (CL) 99 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel1 percent of the area

For a bore near FM 1055, bedrock is not mapped in the top five feet, though deeper conditions are not settled by that map. Seasonal water table conditions are mapped in 1 percent of the area, and high steel corrosion risk is also mapped in 1 percent; the line owner should consider casing and tracer wire materials. For Amherst, we have no mapped flood prone soils to use when planning underground boring routes. The Blackwater Draw Formation is Cenozoic and includes sand, silt and locally clayey material; the map also shows Cenozoic sedimentary rocks of Paleocene age.

How do we bore Amherst’s sandy clay loam while accounting for the soil conditions along the route?

The Amherst soil map points to clay that can hold a hole but collect on the reamer. Along routes such as Main Street, we match the fluid and reaming sequence to the ground encountered.

  1. On a Main Street route, we check the mapped clay conditions and use a fluid mix suited to soil that can stick to the reamer.
  2. Near FM 37, we ream in stages and have the pipe ready before the final pass, reducing the time an open hole waits.
  3. Along older Henderson Avenue properties, we use hydrovac potholing to expose each marked utility before the drill approaches it.
  4. For a bore near the BNSF Railway, we track the drill head from the surface and log depth and pitch as the route advances.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a line go under BNSF Railway in Amherst?

US 84 has 0.1 mapped roadway miles inside Amherst, while FM 37 has 2.2 and FM 1055 has 0.4. A route near those roads needs to account for highway pavement and right of way. Main Street is the longest named street at 1.49 miles, followed by Henderson Avenue at 1.12 miles and Madison Avenue at 1.07 miles. Washington Avenue adds another 0.95 miles. Across the city, 19.08 public road centerline miles make street access and the chosen bore path part of the job plan.

CrossingTypeMapped extentWho has a say
US 84US highway0.1 roadway miles insideState highway office
FM 37State highway2.2 roadway miles insideState highway office
FM 1055State highway0.4 roadway miles insideState highway office
BNSF RailwayRailroad0.38 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway has 0.38 track miles inside Amherst, and the mapped street and rail crossing count is 1. There are no streams mapped inside the city, and none of the mapped street crossings are crossings of named streams. We use the map showing no lakes or ponds within one mile of Amherst to plan underground work around mapped water features. That leaves the BNSF track and local streets as the mapped crossing features to check when setting a route through Amherst.

Whose permission does a bore in Amherst and Lamb County need?

Because Amherst is incorporated, we coordinate boring work on city streets with the city that owns them. Work in the right of way of US 84, FM 37 or FM 1055 needs a TxDOT utility permit, reviewed by the TxDOT Lubbock District. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that application and work under the owner’s permit. A route beneath BNSF Railway needs an agreement from BNSF, with crossing conditions set by the railroad. No streams are mapped inside Amherst.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the water lines near City of Amherst in Amherst?

The City of Amherst public water system uses groundwater wells and has 291 service connections serving 721 people. That system is a key reference when planning a water service or replacement route near Main Street. Electric service reported in Lamb County includes Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative. We confirm the line owner for the specific address before planning an electric conduit bore, rather than assuming one provider serves every Amherst property.

Line ownerWhat it isSourceSize
City of AmherstPublic water systemGroundwater wells291 connections, 721 people served
Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Lamb CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Amherst’s median housing year at 1956; 57 percent of units were built before 1960, 36 percent from 1960 to 1999 and 7 percent in 2000 or later. Along Henderson Avenue, an older service may be a replacement job rather than a new connection. We expose marked utilities with hydrovac potholing before the drill approaches, since locate marks show position but not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Amherst from Littlefield and our Yukon yard?

Amherst is in Lamb County, at an elevation of 3,648 feet, and covers 0.91 square miles. The ZIP code is 79312. Sudan is 7.3 miles northwest; Littlefield is 7.9 miles southeast and is both the nearest larger city and the county seat. Earth is 15.3 miles north, while Spade is 16.1 miles east and Springlake is 16.4 miles north. From our Yukon, Oklahoma yard, the road trip to Amherst is 358 miles and 7.0 hours, a distance that can affect crew mobilization for work near US 84.

Places near Amherst

What boring work comes up along Main Street in Amherst?

  • Water service: A connection near the City of Amherst groundwater system can be routed beneath Main Street to avoid cutting the street surface.
  • Highway crossing: A utility route beneath US 84 needs a bore plan that accounts for the highway right of way and pavement.
  • Rail crossing: A route beneath BNSF Railway must be planned around the railroad’s crossing agreement and track conditions.
  • Fiber route: Conduit along Henderson Avenue can use a bore path that avoids opening the street for a new service.
  • Electric conduit: Near FM 1055, we confirm the line owner and expose marked utilities before drilling close to them.
  • Replacement bore: Older housing near Madison Avenue can call for a new route around existing buried lines rather than a new service run.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote directional boring near Washington Avenue in Amherst?

Start with an Amherst address or map pin, such as a property near Washington Avenue, so we can see the proposed route. Tell us what is going in the ground, for example a water line near the City of Amherst system, then the pipe or conduit size and footage. A sketch or plans help show the crossings around US 84 or BNSF Railway.

The job details set the price: length, pipe or conduit size, ground conditions, marked utilities to expose, pavement, pits and backfill all affect the work. Amherst’s sandy clay loam can change reaming needs, while a route beneath US 84 or BNSF Railway brings crossing planning into scope. Mobilization also matters at 358 road miles from Yukon. Creek or drainage crossings, excavator time, sand backfill, high profile work and emergency response can change the required plan.

Questions people ask about boring in Amherst

Does Trinity Boring Solutions take Amherst jobs in Lamb County, and how are crews assigned?

Yes. We take directional boring work across Texas, including Amherst in Lamb County. Our work is staffed by our own crews or by crews based at satellite yards run by drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including for a route near Main Street.

What do Amherst’s older homes along Henderson Avenue mean for replacement bores?

They make it worth identifying existing lines before setting a replacement route. The American Community Survey 2019 to 2023 estimates put the median housing year at 1956, with 57 percent built before 1960. Near Henderson Avenue, we use hydrovac potholing to expose marked utilities before drilling close to them.

What ground does a bore cross in Amherst’s Amarillo soil?

The USDA soil survey maps Amarillo soil over 97 percent of Amherst, with sandy clay loam beneath about 97 percent at 40 inches. That clay can help keep a hole open, but it can build up on a reamer and grip pipe. The map describes soil patterns, not conditions confirmed by test borings along a specific route.

Will an Amherst bore hit rock near FM 37?

Bedrock is not mapped in the top five feet of Amherst, but that does not establish what lies deeper. The geologic map shows the Cenozoic Blackwater Draw Formation, including sand, silt and locally clayey material, along with Cenozoic sedimentary rocks of Paleocene age. Site conditions along FM 37 still need to guide the bore plan.

Who approves an Amherst bore beneath US 84?

TxDOT reviews utility permits for work in the US 84 right of way through the TxDOT Lubbock District. The utility owner submits the application through TxDOT’s RULIS system, not the drilling contractor. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner.

What does an Amherst bore beneath BNSF Railway require?

A crossing beneath BNSF Railway needs an agreement from the railroad that owns the track. For Amherst crossings, we follow the agreement’s casing, depth and flagging conditions before proceeding with boring work. BNSF has 0.38 track miles inside Amherst, and one street and rail crossing is mapped in the city.

Does Trinity cover Sudan and rural sites outside Amherst?

Yes. We take work in Amherst, nearby Sudan and rural locations outside the city limits. Sudan is 7.3 miles northwest of Amherst, while Littlefield is 7.9 miles southeast. The route and access for a rural job help determine the crew plan and mobilization.

How much notice does Texas811 need for a bore along Main Street in Amherst?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If a Main Street start slips more than 14 days past the original notice, submit a new request. When marks wear off or move in Amherst, we refresh them through Texas811 before continuing underground work.

What affects the cost of directional boring near US 84 in Amherst?

The price reflects the job scope, including length, line size, Amherst’s sandy clay loam, utilities to expose, pavement, pits and backfill. A route crossing US 84 or BNSF Railway can add planning needs. Mobilization from Yukon also matters because Amherst is 358 road miles from the main office.

Where the Amherst facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Amherst

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Amherst, Texas

Type the address of your job in Amherst. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Amherst

Same county: Olton. All counties: Texas county list.