Marble Falls Texas Directional Boring: Eckrant Soil, US 281 and Austin Western Railroad
Quick Answer: On US 281 and the roads branching from it, we do directional boring, also called horizontal directional drilling (HDD), in Marble Falls, Texas. Mormon Mill Road is among the city’s longest streets, and the Yukon main office is 395 road miles away. Eckrant soil and shallow rock can make a bore meet hard material early. With bedrock mapped across 82 percent of the area within 40 inches, we plan the drill and reaming for rock rather than assuming a long run of loose soil.
Marble Falls bores at a glance
- Incorporated city in Burnet County, Texas. Population 9,413 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 395 miles, about 8 hours of driving.
- Ground: Eckrant soil is mapped on 26 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 82 percent of the area.
- Highways inside the boundary: US 281, RM 1431, RM 2147 and Texas State Highway 71. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: Austin Western Railroad, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Whitman Branch, Little Flatrock Creek, Flatrock Creek and Backbone Creek.
- Public water: City of Marble Falls, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can do directional boring near Mormon Mill Road in Marble Falls?
We take directional boring work across Marble Falls in Burnet County, a city with a Census Bureau Vintage 2024 estimate of 9,413 people. Along streets such as Mormon Mill Road and Broadway Street, our crews can place water, sewer, gas, electric conduit or fiber without opening the full pavement run. The route and line owner determine the bore plan.
Our main office is in Yukon, Oklahoma, and Marble Falls work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle jobs from 3/4 inch service lines to 48 inch casing, including short service bores and longer runs along Mormon Mill Road. Our family business began in 1965, and since 1982 we have done directional boring, including reviewing crossing plans around US 281 in Marble Falls.

How does Eckrant soil affect a bore in Marble Falls?
The USDA soil survey maps Eckrant soil across 26 percent of Marble Falls, with Eckrant and rock outcrop associations covering additional mapped ground. Clay is the most common surface texture at 30 percent, while very cobbly clay accounts for 26 percent. At about 40 inches below the surface, bedrock is mapped across 82 percent of the area, and the average clay content there is 43 percent. Those patterns point to a route where the drill may shift from sticky clay into shallow rock, so we plan reaming and fluid use for the ground along the actual bore path.
| USDA soil survey, inside the Marble Falls city limits | What is mapped |
|---|---|
| Soil series mapped | Eckrant 26 percent, Harper 18 percent, Spicewood 17 percent, Hensley 11 percent and Krum 8 percent |
| Texture at the surface | clay 30 percent, very cobbly clay 26 percent and cobbly clay loam 17 percent |
| Texture about 40 inches down | bedrock 82 percent, clay 8 percent and clay loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 8 percent and lean clay (CL) 5 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | 82 percent of the area (62 percent hard rock, 20 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 88 percent of the area |
The USDA soil survey maps hard bedrock within 60 inches across 62 percent of Marble Falls and weathered bedrock across 20 percent. The mapped unit is Marble Falls Limestone, a Pennsylvanian age rock that can require rock drilling where it meets the route. In Burnet County, seasonal water table and flood prone soils are not mapped, so we verify conditions before setting bore depth. Steel corrosion risk is mapped high across 88 percent of the area, so the line owner should choose casing and tracer wire protection; HDPE does not have that steel corrosion concern.
What does it take to bore through Marble Falls bedrock?
With Marble Falls Limestone and shallow bedrock in the mapped ground, we match the bit and reaming plan to what the bore encounters. On a route near Eckrant soil, changing from clay to rock matters.
- Where Eckrant clay holds the hole but sticks to the reamer, we use staged reaming and manage fluid so the ground does not grip the pipe.
- With Marble Falls bedrock mapped near the surface, we choose rock drilling equipment when the bore meets hard limestone and check the head as ground changes.
- Before drilling near a marked line on Mormon Mill Road, we hydrovac pothole it; paint shows its position, not its depth.
- At a Whitman Branch crossing, we track the drill head from the surface and log depth and pitch while keeping the creek bank uncut.

Which roads, tracks, or creeks can we cross near US 281 in Marble Falls?
US 281 runs through Marble Falls, alongside RM 1431, RM 2147 and Texas State Highway 71. A highway bore needs a route and depth plan that fits the specific road and its right of way. Mormon Mill Road is the longest named street in the city, followed by Rocky Road and Broadway Street, so a project on any of them still needs its own utility checks and access plan. Boring can leave the pavement and driveways uncut while pits sit off the travel surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 11.6 roadway miles inside | State highway office |
| RM 1431 | State highway | 3.8 roadway miles inside | State highway office |
| RM 2147 | State highway | 1.9 roadway miles inside | State highway office |
| Texas State Highway 71 | State highway | 1.9 roadway miles inside | State highway office |
| US 281 Loop | Highway nearby | Runs along or touches the city limits | State highway office |
| Austin Western Railroad | Railroad | 1.36 track miles inside | The railroad |
| Whitman Branch | Stream | 4.02 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Flatrock Creek | Stream | 3.95 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Flatrock Creek | Stream | 2.23 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Backbone Creek | Stream | 1.86 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Tiger Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Coldspring Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Williams Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Hamilton Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
Austin Western Railroad has 1.36 track miles inside Marble Falls, with 3 mapped street and rail crossings in the city. A route across its track needs the railroad’s crossing agreement. Named waterways include Whitman Branch, with 4.02 channel miles, and Little Flatrock Creek, with 3.95; public records map 14 street crossings of named streams. Lake Marble Falls is also inside city limits, so a water crossing needs jurisdiction review during planning.
Do I need a permit for Austin Western Railroad or Marble Falls roads?
For work in US 281, RM 1431, RM 2147 or Texas State Highway 71 right of way, TxDOT’s Austin District reviews the utility permit. The utility that owns the line files through RULIS, and we prepare the bore plan and profile for the utility’s application. TxDOT rules require boring or tunneling beneath existing highway pavement, with casing at crossings and the bore extending below all travel lanes on rural highways. A crossing of Austin Western Railroad also needs an agreement from the railroad owner. For a creek or Lake Marble Falls crossing, we check for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Burnet County and Marble Falls?
The City of Marble Falls public water system uses surface water and reports 3,725 service connections serving 8,059 people. Before a bore near those water lines, we hydrovac pothole marked utilities to verify their depth. Oncor Electric Delivery Company and Pedernales Electric Cooperative report electric service in Burnet County, but neither should be assumed to own a line at every Marble Falls address. The line owner confirms conduit requirements before that bore is planned.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Marble Falls | Public water system | Surface water | 3,725 connections, 8,059 people served |
| Oncor Electric Delivery Company and Pedernales Electric Cooperative | Electric utilities reporting service in Burnet County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median home year in Marble Falls at 2002; 7 percent of housing was built before 1960, and 58 percent in 2000 or later. A replacement route near Rocky Road may meet older buried lines, while a new service near Oak Ridge Drive may need a different tie in. We expose marked utilities by hydrovac before drilling near them because locate paint gives position, not depth.

How far is Marble Falls from Lakeway and our Yukon office?
Marble Falls is in Burnet County, covers 16.49 square miles and sits at an elevation of 851 feet. For underground work in Marble Falls, we use ZIP codes 78654 and 78657 to identify service addresses during planning. Meadowlakes is 1.1 miles west, Cottonwood Shores is 3.0 miles west, and Granite Shoals is 5.7 miles west. Burnet, the county seat, is 13.4 miles north; the nearest larger city listed is Lakeway, 22.4 miles southeast. The Yukon yard is 395 road miles away, an 8.0 hour drive, which affects mobilization for a bore on US 281.
Places near Marble Falls
- Directional boring in Meadowlakes: 1.1 miles west
- Directional boring in Cottonwood Shores: 3 miles west
- Directional boring in Double Horn: 5.5 miles southeast
- Directional boring in Granite Shoals: 5.7 miles west
- Directional boring in Horseshoe Bay: 6.3 miles west
- Directional boring in Lakeway: 22.4 miles southeast
What boring work comes up near Rocky Road in Marble Falls?
- Highway crossing: A bore beneath US 281 needs a route and depth plan suited to the highway right of way and the line being installed.
- Water service: A connection near the City of Marble Falls water system needs potholing to verify marked lines before the drill approaches.
- Fiber route: A fiber bore along Mormon Mill Road can pass below pavement and driveways, with entry and exit pits kept off the road surface.
- Creek crossing: At Little Flatrock Creek, a bore can pass beneath the channel while the crossing is checked for jurisdiction during planning.
- Rail crossing: A route under Austin Western Railroad needs the railroad owner’s agreement and a plan that follows its crossing conditions.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Marble Falls quote near Oak Ridge Drive?
For a quote on Oak Ridge Drive or another Marble Falls route, send the address or map pin, what goes in the ground, pipe or conduit size, footage and any sketch or plans. The route’s ground and crossings can change the work: Oak Ridge Drive may have different access and utility conflicts from a line beside US 281.
The price depends on the job scope, not just the length. Eckrant soil and shallow Marble Falls Limestone affect drilling time and reaming; crossings of US 281 or Austin Western Railroad add route and approval planning. We also account for line size, utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. The Yukon yard is 395 road miles away, so mobilization matters, especially for high profile or emergency work.
Questions people ask about boring in Marble Falls
Does Trinity take directional boring jobs in Burnet County and Marble Falls, and who does the work?
Yes. We take directional boring work in Marble Falls and across Burnet County. Our own crews handle work, and partner drilling contractors from satellite yards may also be on site. You work with Trinity from the first call through the bore log, whether the route is on Mormon Mill Road or elsewhere in the city.
Who owns electric lines in Burnet County near Marble Falls, and who confirms conduit specs?
Across Burnet County, Oncor Electric Delivery Company and Pedernales Electric Cooperative report electric service, so we check utilities before boring. The owner of a particular line must be confirmed before planning a conduit bore near US 281 or another Marble Falls route. That line owner confirms the conduit specifications for its system.
Does the city control Broadway Street in Marble Falls, and can a bore avoid cutting it?
Marble Falls is incorporated, so Broadway Street is a city street. Directional boring can place a line below the street without cutting its full paved length. The route still needs utility checks and entry and exit pits, and any highway right of way such as US 281 follows TxDOT permitting.
How old are buried lines near Rocky Road in Marble Falls, and can replacement lines be bored?
The American Community Survey 2019 to 2023 estimates give Marble Falls a median housing year of 2002, with 7 percent of homes built before 1960. A replacement bore near Rocky Road may encounter older utilities, so marked lines need to be exposed and checked before the drill approaches.
Does Eckrant soil in Marble Falls corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 88 percent of Marble Falls, including areas mapped as Eckrant soil. When planning a US 281 crossing in Marble Falls, we follow the line owner’s coating choice for steel casing or tracer wire. HDPE is not affected by that steel corrosion concern, but the pipe choice depends on the line requirements.
What ground does a bore pass through in Marble Falls near Eckrant soil?
The USDA soil survey maps Eckrant soil across 26 percent of Marble Falls. Clay makes up 30 percent of mapped surface texture, and bedrock is mapped at about 40 inches across 82 percent of the area. These are mapped patterns, not test borings, so the route may encounter both sticky clay and shallow rock.
What bore sizes and lengths can Trinity handle near Oak Ridge Drive in Marble Falls?
We handle lines from 3/4 inch service lines through 48 inch casing, and bore lengths from 10 feet to 5,000 feet. A job near Oak Ridge Drive is sized to its route, ground and crossings, including the shallow bedrock mapped across much of Marble Falls.
How much notice does Texas811 need for a Marble Falls bore near Mormon Mill Road?
Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If a Mormon Mill Road job starts more than 14 days after the original notice, request a new ticket. Before work continues near US 281 in Marble Falls, we have worn or moved marks refreshed through Texas811.
What affects the cost of directional boring near US 281 in Marble Falls?
For a US 281 crossing in Marble Falls, we base the price on the defined job scope and the work required underground. For a route near US 281, the factors include length, pipe size, Eckrant soil or limestone, utilities to expose, pavement and highway crossing requirements. Creek crossings, pits, excavator time and mobilization from the Yukon yard also affect the work; there is no single price based on footage alone.
Where the Marble Falls facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Marble Falls
- U.S. Census Bureau, TIGER/Line 2024: Marble Falls boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Marble Falls
- U.S. Census Bureau, American Community Survey 2019 to 2023: Marble Falls housing units and year built
- Macrostrat geologic map compilation: map units under Marble Falls
- U.S. EPA Safe Drinking Water Information System: public water systems serving Marble Falls
- U.S. Department of Transportation, North American Rail Network: track owners in Burnet County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Burnet County
- U.S. Geological Survey, Elevation Point Query Service: Marble Falls elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Marble Falls
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Marble Falls
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Marble Falls, Texas
Type the address of your job in Marble Falls. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Marble Falls
Same county: Burnet · Bertram · Highland Haven · Briggs. All counties: Texas county list.
