trinityboringsolutions.com

Granite Shoals Texas Directional Boring: Voca Soil, RM 1431 and Elm Creek

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Granite Shoals for lines that need to pass beneath Elm Creek or a street. Granite Shoals is 400 road miles from our Yukon, Oklahoma main office, so a bore near RM 1431 is staffed by our own crews or vetted partner crews from satellite yards. Voca soil has very gravelly clay mapped at 40 inches, which can cling to tooling and pipe. We plan the reaming and fluid use around that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Granite Shoals bores at a glance

  • Incorporated city in Burnet County, Texas. Population 5,417 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 400 miles, about 8.2 hours of driving.
  • Ground: Voca soil is mapped on 79 percent of the area, with very gravelly clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: RM 1431. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Austin Western Railroad (line shown as out of service), with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Elm Creek and Deep Creek.
  • Public water: City of Granite Shoals, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can handle directional boring near Elm Creek in Granite Shoals?

We take directional boring work in Granite Shoals, Burnet County, where the Census Bureau Vintage 2024 estimate puts the population at 5,417. Along Honeymoon Ranch Road or near RM 1431, we install water, sewer, gas, electric conduit and fiber lines when the route needs to pass under pavement or avoid cutting the surface.

Our main office is in Yukon, Oklahoma, and Granite Shoals work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been directional boring since 1982. Four decades of boring helps us plan for Voca soil, where gravelly surface material gives way to very gravelly clay at depth. We are a family business that started in 1965, and we stay involved from the first call through the bore log.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What is Voca soil like to bore in Granite Shoals?

The USDA soil survey maps Voca soil across 79 percent of Granite Shoals. The mapped surface texture is gravelly sandy loam, while the texture at about 40 inches is very gravelly clay across that same mapped share. Average clay content at that depth is 41 percent. This is a mapped pattern, not a test at a particular address, so a site check still matters. Gravel can deflect the drill head, while sticky clay can build up on a reamer and grip pipe during the pullback.

USDA soil survey, inside the Granite Shoals city limitsWhat is mapped
Soil series mappedVoca 79 percent and Keese 6 percent
Texture at the surfacegravelly sandy loam 79 percent and coarse sandy loam 6 percent
Texture about 40 inches downvery gravelly clay 79 percent and bedrock 6 percent
Engineering class about 40 inches downclayey sand (SC) 79 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The USDA soil survey maps bedrock within 60 inches on 6 percent of Granite Shoals, with weathered bedrock in that mapped share; hard bedrock is not mapped within that depth. Typical bedrock depth is 14 inches, so the route still needs attention where rock appears. Seasonal water table and flood prone soils are not mapped, and high steel corrosion risk is not mapped. Town Mountain Granite, a Stenian age unit, is the local geologic map unit; encountering granite can call for slower rock drilling and careful steering.

How do we bore very gravelly clay in Granite Shoals?

Near Granite Shoals streets and Elm Creek, we match the drilling setup to the changing ground. Voca soil has gravelly material over very gravelly clay, so we watch returns and keep the hole stable as the reamer advances.

  1. With Voca soil’s gravelly sandy loam over very gravelly clay, we adjust fluid and reaming stages to keep sticky material from loading the tools.
  2. Where gravel in Granite Shoals could push the drill head off line, we check depth and pitch as each rod advances.
  3. If Town Mountain Granite is encountered, we slow down and use rock drilling methods suited to the harder material.
  4. Near a marked utility along Honeymoon Ranch Road, we hydrovac pothole to verify its depth before the drill approaches.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a Granite Shoals line pass under RM 1431?

RM 1431 is the state highway mapped for 6.5 roadway miles inside Granite Shoals, so work in its right of way needs TxDOT review. The city street network includes 98.13 public road centerline miles. Honeymoon Ranch Road is the longest named street at 2.35 miles, followed by Phillips Ranch Road at 2.32 miles and Shorewood Drive at 1.98 miles. A route under those streets can keep pavement intact, but its pits and bore path still need to fit the available site access.

CrossingTypeMapped extentWho has a say
RM 1431State highway6.5 roadway miles insideState highway office
Austin Western Railroad (line shown as out of service)Railroad0.39 track miles insideThe railroad
Elm CreekStream1.53 channel miles insideChecked for Corps of Engineers jurisdiction
Deep CreekStream0.82 channel miles insideChecked for Corps of Engineers jurisdiction
Station CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Lake Lyndon B JohnsonStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Dry CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Williams CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Lake Lyndon B JohnsonLake or pond2,668 acres, insideChecked for Corps of Engineers jurisdiction
Lake Marble FallsLake or pond563 acres, nearbyChecked for Corps of Engineers jurisdiction
Long Rock TankLake or pond2 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Austin Western Railroad (line shown as out of service) has 0.39 track miles in Granite Shoals, with one mapped street and rail crossing in the city. Any bore under that track needs the railroad owner’s crossing agreement. Elm Creek has 1.53 channel miles in town and Deep Creek has 0.82; public mapping shows six street crossings of named streams. Lake Lyndon B Johnson is also inside the limits, so a water crossing needs jurisdiction checked during planning.

Whose approval does a Granite Shoals bore need in Burnet County?

Granite Shoals is incorporated, so its city streets belong to the city itself. For a bore in RM 1431 right of way, the line owner, not the driller, files through TxDOT’s RULIS system for review by the TxDOT Austin District; we provide the bore plan and profile. On highway crossings, electric and communication lines need 60 inches of cover below the lowest crossed grade, and water lines need 60 inches; the permit can set another depth. A railroad crossing needs the owner’s agreement, and an Elm Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction. For a bore along Honeymoon Ranch Road, the caller describes the path to Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. A delay beyond 14 days requires a new notice, and worn or moved marks must be refreshed through Texas811 before work continues.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Granite Shoals, including the City of Granite Shoals?

The City of Granite Shoals public water system uses surface water and reports 2,265 service connections serving 6,795 people. That makes water line ownership and connection points useful details for planning work near RM 1431 or a city street. Oncor Electric Delivery Company and Pedernales Electric Cooperative report electric service in Burnet County. We confirm the line owner for the specific address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of Granite ShoalsPublic water systemSurface water2,265 connections, 6,795 people served
Oncor Electric Delivery Company and Pedernales Electric CooperativeElectric utilities reporting service in Burnet CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Granite Shoals’ median housing year at 1984. The survey reports 72 percent of homes built from 1960 to 1999 and 26 percent built in 2000 or later. That mix can mean either replacement work or a new service near Honeymoon Ranch Road. Before drilling near a marked utility, we hydrovac pothole to expose it; paint shows its position, not its depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Granite Shoals near Highland Haven?

Granite Shoals is an incorporated city in Burnet County, at an elevation of 849 feet and covering 7.06 square miles. Its ZIP code is 78654. Highland Haven is 2.1 miles northwest, Sunrise Beach Village is 3.1 miles west, and Cottonwood Shores is 3.3 miles southeast. Burnet, the county seat, is 13.6 miles northeast; Lakeway is the nearest larger city at 27.9 miles southeast. Our Yukon, Oklahoma main office is 400 road miles away, or 8.2 hours by road, which can affect mobilization for a Granite Shoals job.

Places near Granite Shoals

What could we bore near Elm Creek in Granite Shoals?

  • Highway crossing: A route under RM 1431 needs a bore plan for the TxDOT right of way and room for pits clear of the travel lanes.
  • Water service: A connection near Honeymoon Ranch Road can be routed below the street surface toward the City of Granite Shoals water system.
  • Creek crossing: A route beneath Elm Creek needs planning around the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: Work under the Austin Western Railroad track in Granite Shoals needs a crossing agreement from the track owner.
  • Fiber conduit: A fiber route along Shorewood Drive can use a bore to avoid opening the paved street.
  • Park service: A line near Bluebriar Park can be bored with entry and exit pits placed in workable ground beside the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Granite Shoals quote near Honeymoon Ranch Road?

For a quote near Honeymoon Ranch Road, send the street address or a map pin first. Tell us what is going in the ground, such as water or fiber, then the pipe or conduit size and the footage. A sketch or plans help us see how the route relates to RM 1431, driveways, and any creek or drainage crossing.

Voca soil is a key cost factor because the gravelly clay at depth can change reaming and pullback time. Length and pipe or conduit size shape the equipment and work plan. We also consider utilities to expose, pavement or concrete, creek and drainage crossings such as Elm Creek, and the pits, excavator time and sand backfill needed at the site. Mobilization matters too, since Granite Shoals is 400 road miles from our Yukon main office.

Questions people ask about boring in Granite Shoals

Does Trinity Boring Solutions take jobs in Granite Shoals, Burnet County?

Yes. We take directional boring work in Granite Shoals, Burnet County, and staff it with our own crews or crews from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether the route is near Elm Creek or RM 1431.

Is there rock close to the surface in Granite Shoals?

The USDA soil survey maps bedrock within five feet on 6 percent of Granite Shoals, and that mapped bedrock is weathered; hard bedrock is not mapped within five feet. Town Mountain Granite is the geologic unit shown for the area. A route still needs to account for rock if it is encountered at a particular site.

Who approves a bore under RM 1431 in Granite Shoals?

The line owner files the utility permit through TxDOT’s RULIS system, and the TxDOT Austin District reviews the RM 1431 work. We prepare the bore plan and profile for the owner’s application. The permitted cover depends on the line type and crossing, and the district can require a different depth.

What does a crossing under Austin Western Railroad (line shown as out of service) in Granite Shoals require?

A crossing under the Austin Western Railroad track needs an agreement from the railroad that owns it, even though the line is shown as out of service. The agreement sets the casing, depth and flagging details. Public mapping shows 0.39 track miles and one mapped street and rail crossing in Granite Shoals.

Can a line be bored under Elm Creek in Granite Shoals?

A bore can be planned under Elm Creek, but the crossing needs review for U.S. Army Corps of Engineers jurisdiction during planning. Elm Creek has 1.53 channel miles mapped in Granite Shoals. The route, depth and access for the entry and exit pits depend on the site conditions.

Who runs the Granite Shoals water system, and where does its water come from?

The City of Granite Shoals owns and runs the public water system, which uses surface water. It reports 2,265 service connections and serves 6,795 people. For a bore near RM 1431, confirming the specific water line owner and location helps us plan utility exposure.

How much 811 notice do I need for a bore on Honeymoon Ranch Road in Granite Shoals?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Honeymoon Ranch Road start slips more than 14 days past the original notice, make a new request. Worn or moved marks need refreshing through Texas811 before work continues.

Does the distance from Lakeway change a Granite Shoals bore job?

Granite Shoals is 400 road miles and 8.2 hours by road from our Yukon, Oklahoma main office. Lakeway is 27.9 miles southeast, but it is not the measure of our mobilization from Yukon. The distance from our main office can affect mobilization planning for work near Elm Creek or RM 1431.

What affects the cost of directional boring near RM 1431 in Granite Shoals?

The main factors are bore length, line size, Voca soil and rock conditions, utilities to expose, pavement, crossings, pits and equipment time. Work under RM 1431 or near Elm Creek can add crossing and access demands. Mobilization from our Yukon main office also matters because Granite Shoals is 400 road miles away.

Where the Granite Shoals facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Granite Shoals

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Granite Shoals, Texas

Type the address of your job in Granite Shoals. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Granite Shoals

Same county: Marble Falls · Burnet · Bertram · Double Horn · Briggs. All counties: Texas county list.