trinityboringsolutions.com

Sheffield Texas Directional Boring: Upton Soil, Texas State Highway 290, Pecos River

Quick Answer: Upton soil and very gravelly loam shape Sheffield bores; gravel can deflect the head, so we check depth and pitch as each rod advances. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), for lines crossing Texas State Highway 290. Sheffield is 504 road miles from our Yukon, Oklahoma main office, and Texas State Highway 349 also runs through the mapped community. Clay and gravel at about 40 inches can grip pipe or let a hole cave, so staged reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sheffield bores at a glance

  • Unincorporated community in Pecos County, Texas. Population 174 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 504 miles, about 10.2 hours of driving.
  • Ground: Upton soil is mapped on 43 percent of the area, with very gravelly loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 12 percent of the area.
  • Highways inside the boundary: Texas State Highway 290 and Texas State Highway 349. State permit office: TxDOT Odessa District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Sheffield Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Sheffield near Texas State Highway 290?

Upton soil is part of the Sheffield ground Trinity plans around as we take directional boring work in this unincorporated Pecos County community. The Census Bureau counted 174 residents in the 2020 Census; it does not publish yearly estimates for unincorporated places. Along Main Street or Texas State Highway 290, we can bore water, sewer, gas, electric conduit or fiber lines without cutting the route surface.

Our main office is in Yukon, Oklahoma, and Sheffield work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet under the Arkansas River in Tulsa. A typical Sheffield job beside that is shorter, with the plan shaped by Upton soil and a route such as Garrett Street.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What is Sheffield soil like to bore through Upton ground?

Sheffield has Upton soil across 43 percent of its mapped area, and that gently sloping association is the main soil pattern to consider. The USDA soil survey maps very gravelly loam at about 40 inches across 44 percent of the area, while silty clay loam covers another 44 percent at that depth. Gravelly ground can loosen behind the bit, while clay can cling to the reamer and grip the pipe. These are mapped soil patterns, not test borings, so a route near Pine Street still needs planning for its actual conditions.

USDA soil survey, inside the Sheffield mapped community boundaryWhat is mapped
Soil series mappedUpton 43 percent, Reagan 34 percent, Ector 12 percent and Iraan 10 percent
Texture at the surfacesilty clay loam 44 percent, gravelly clay loam 43 percent and very gravelly loam 12 percent
Texture about 40 inches downvery gravelly loam 44 percent, silty clay loam 44 percent and bedrock 12 percent
Engineering class about 40 inches downclayey gravel (GC) 44 percent and lean clay (CL) 44 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches12 percent of the area (12 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel10 percent of the area

The USDA soil survey maps bedrock within five feet across 12 percent of Sheffield, with a typical depth of 15 inches; the mapped bedrock is hard, not weathered. Seasonal water tables are not mapped within 60 inches, but flood prone soils cover 10 percent. High steel corrosion risk is mapped across 10 percent, so the line owner should consider casing and tracer wire materials. Quaternary deposits, undivided, include sand, silt, clay and gravel, while Early Cretaceous sedimentary units include chalk and limestone. A bore near the Pecos River needs attention to ground changes along its route.

How do crews handle Sheffield very gravelly loam?

Sheffield’s very gravelly loam can cave behind the bit, while its silty clay loam can cling to a reamer. We match fluid and reaming steps to the route near Main Street or Texas State Highway 349.

  1. At a Sheffield route mapped as gravelly, we stage the reaming and have the pipe ready before the final pass so the hole is not left open longer than needed.
  2. Where silty clay loam lies along Garrett Street, we use fluid suited to sticky ground and pull the pipe soon after opening the hole to limit clay grip.
  3. Gravel can knock a head off course near Texas State Highway 349, so we check depth and pitch at each drill rod rather than relying on a single reading.
  4. Before the drill nears a marked line beside Sheffield Water Supply Corporation service routes, we hydrovac pothole it; a surface mark does not show its depth.
Bobcat E35 mini excavator lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in northeast Oklahoma City
Lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in Oklahoma City.

What is in the way of a new Sheffield line near Texas State Highway 290?

Texas State Highway 290 and Texas State Highway 349 each have 1.3 mapped roadway miles inside Sheffield, so a bore crossing either route needs careful alignment. The community also has 10.84 public road centerline miles. Pine Street is the longest named street at 0.73 miles, followed by Garrett Street at 0.52 miles and Main Street at 0.5 miles. A route beneath those streets can keep pavement intact, with entry and exit pits placed off the traveled surface where the site allows.

CrossingTypeMapped extentWho has a say
Texas State Highway 290State highway1.3 roadway miles insideState highway office
Texas State Highway 349State highway1.3 roadway miles insideState highway office
Pecos RiverStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Sheffield or within one mile outside the mapped community boundary, so there is no mapped track route to plan around. The Pecos River is 0.7 miles outside the boundary, and no street crossings of named streams are mapped inside Sheffield. Unnamed drainage totals 1.72 miles within the community, so the route and pits still need review for local drainage. No lakes or ponds are mapped within one mile.

Who approves a Sheffield bore in Pecos County?

For a Sheffield bore beneath Texas State Highway 290, required cover is 60 inches for electric, communication and water lines, and 60 inches for a pressurized sewer crossing. TxDOT may set a different depth in its permit. Sheffield has no city government, so county roads such as Main Street are not city streets; state highway right of way is handled by TxDOT. The utility owner, not the drilling contractor, files a highway utility application in RULIS, and TxDOT’s Odessa District reviews it. Trinity prepares the bore plan and profile for the utility owner’s application. Existing highway pavement is bored or tunneled beneath, and rural highway crossings extend under all travel lanes. A route at the nearby Pecos River is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near Sheffield Water Supply Corporation?

Sheffield Water Supply Corporation uses groundwater wells and reports 227 service connections serving 350 people, a network that matters when routing a new line near Pine Street. Electric utilities reporting service in Pecos County are AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative. Those reports do not identify the provider at every Sheffield address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Sheffield Water Supply CorporationPublic water systemGroundwater wells227 connections, 350 people served
AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Rio Grande Electric Cooperative and Southwest Texas Electric CooperativeElectric utilities reporting service in Pecos CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Sheffield’s median housing year at 1999; 4 percent of homes were built before 1960, 47 percent from 1960 to 1999 and 49 percent in 2000 or later. A replacement along Garrett Street may meet older buried services, while a newer Main Street connection may be a service extension. Before drilling near either route, we hydrovac expose marked utilities; paint shows position, not depth. We also check the water system and electric line locations on the actual bore path.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Sheffield, Pecos County and nearby Iraan?

Sheffield is an unincorporated community in Pecos County, at an elevation of 2,144 feet and covering 0.89 square miles. ZIP code 79781 identifies the area for planning a trip to a site near Texas State Highway 290. Iraan is 16.3 miles north, Ozona is 36.6 miles east, and Rankin is 37.9 miles north. Fort Stockton, the county seat, is 64.6 miles west. Our Yukon, Oklahoma yard is 504 road miles away, a 10.2 hour drive, so distance is part of planning a Sheffield mobilization.

Places near Sheffield

What would we bore near the Pecos River and Sheffield?

  • Highway crossing: A water or communications line beneath Texas State Highway 290 needs a bore plan that accounts for required cover and the rural travel lanes.
  • Street service: A new water line along Main Street can run underground rather than requiring an open cut across its pavement.
  • Fiber route: A conduit bore following Pine Street can connect services while avoiding a surface trench along the mapped street.
  • Water connection: Work near Sheffield Water Supply Corporation lines starts with locating and exposing marked utilities along the proposed service route.
  • Drainage crossing: A bore near the Pecos River needs a route and pit plan that accounts for the nearby channel and drainage ground.
  • Highway conduit: An electric conduit route at Texas State Highway 349 needs the line owner and TxDOT permit path identified before work in the right of way.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Sheffield bore near Pine Street?

For a Sheffield quote, start with the address or map pin, such as a location on Pine Street. Tell us what goes underground, whether it is water, fiber or electric conduit, then give the pipe or conduit size and footage. A sketch or plans showing the route toward Texas State Highway 290 help us see crossings, pits and access.

A short route along Pine Street with few marked utilities and no pavement or drainage crossing is simpler to plan. Gravelly Upton soil, clay that grips a reamer, or bedrock mapped shallow in parts of Sheffield can add drilling steps. A Texas State Highway 290 crossing brings cover and permit planning; concrete, exposed utilities, creek or drainage crossings, pits, sand backfill and excavator time also affect the scope. High profile or emergency work changes the plan, as can mobilization from the Yukon yard 504 road miles away.

Questions people ask about boring in Sheffield

Does Trinity take directional boring jobs in Sheffield, Pecos County, and how are crews assigned?

Yes, we take directional boring work in Sheffield and across Texas. The job is handled by Trinity, with our own crews or crews working from satellite yards operated by partner contractors we have vetted. You work with Trinity from the first call through the bore log, whether the crew is near Main Street or Texas State Highway 290.

Who manages Main Street in Sheffield, and does a bore have to cut it?

Sheffield has no city government, so Main Street is not managed by a city street department. A directional bore can pass beneath the street without cutting its surface, subject to route and site conditions. For a state highway such as Texas State Highway 290, the utility owner handles the TxDOT permit application.

Do Sheffield homes and buried lines near Garrett Street need replacement bores?

Housing records give Sheffield a median year built of 1999, with 4 percent of homes built before 1960 and 49 percent built in 2000 or later. Those figures cannot identify the age of a buried line on Garrett Street. A replacement route still needs utility locating and potholing before the drill approaches marked lines.

Could Sheffield bore pits near the Pecos River flood or fill with groundwater?

Seasonal water tables are not mapped within 60 inches in Sheffield, but flood prone soils cover 10 percent of the mapped area. The Pecos River lies 0.7 miles outside the community boundary, so a route near it merits drainage and channel review. Pit placement should follow the ground and planned route.

What does Sheffield Upton soil look like about 40 inches down?

The USDA soil survey maps Upton soil across 43 percent of Sheffield. At about 40 inches, very gravelly loam covers 44 percent of the mapped area, and silty clay loam covers another 44 percent. Gravel may let a hole cave, while clay can stick to the reamer, so the drilling approach depends on the route.

Is there bedrock near the surface in Sheffield?

Bedrock is mapped within five feet across 12 percent of Sheffield, with a typical depth of 15 inches. The mapped bedrock is hard rather than weathered, so a route through that area may need slower drilling and a rock suitable tool. The soil survey maps patterns, not conditions at a specific Pine Street address.

Will Trinity take Sheffield work outside the boundary near Iraan?

We take work across Texas and can consider Sheffield area routes outside the mapped community boundary, including work toward Iraan, 16.3 miles north. Each site needs a route and access review. A connection near Texas State Highway 290 or a rural service route may have different utility and mobilization needs.

How early should I request Texas811 marks for a Sheffield bore on Pine Street?

The locate request for a Pine Street bore must be made at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves more than 14 days past the original notice, make a new request. Marks that wear off or move need refreshing through Texas811 before work continues.

What affects the cost of a Sheffield bore under Texas State Highway 290?

The route length, pipe or conduit size, Upton soil and any shallow mapped bedrock all affect the work. A Texas State Highway 290 crossing adds permit and cover planning, while marked utilities, pavement, drainage crossings, pits and excavator time can add steps. Mobilization also matters because Sheffield is 504 road miles from the Yukon yard.

Where the Sheffield facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sheffield

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sheffield, Texas

Type the address of your job in Sheffield. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sheffield

Same county: Fort Stockton · Imperial · Coyanosa. All counties: Texas county list.