Ozona Texas Directional Boring: Angelo Silty Clay Loam, Interstate 10 and Gurley Draw
Quick Answer: Angelo silty clay loam holds a bore hole, but sticky clay can build on the reamer. We handle directional boring, also called horizontal directional drilling (HDD), for Ozona crossings such as Interstate 10. From our Yukon, Oklahoma main office, the 462 road miles reach work near Avenue East. The USDA soil survey maps Angelo soil across 49 percent of the community, so staged reaming and prompt pipe pull help manage clay that grips the pipe.
Ozona bores at a glance
- County seat of Crockett County, Texas. Population 2,663 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 462 miles, about 9.4 hours of driving.
- Ground: Angelo soil is mapped on 49 percent of the area, with silty clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 40 percent of the area.
- Highways inside the boundary: Interstate 10, Texas State Highway 163 and RM 2398. State permit office: TxDOT San Angelo District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Gurley Draw.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Interstate 10 in Ozona?
Ozona is an unincorporated community in Crockett County, with 2,663 people in the 2020 Census count. We install water, sewer, gas, electric conduit and fiber lines, including service runs along Avenue East and connections near Interstate 10. The line route and size determine the bore plan, especially where streets or existing utilities cross the path.
Our main office is in Yukon, Oklahoma, and Ozona work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A small job might be a 3/4 inch service line near 11th Street; a larger project can use 48 inch casing. Our family business began in 1965, and we have done directional boring since 1982, with bore lengths from 10 feet to 5,000 feet.

What kind of ground does Ozona’s Angelo soil present?
The USDA soil survey maps Angelo soil across 49 percent of Ozona, with the map unit named Angelo silty clay loam, 0 to 2 percent slopes. At about 40 inches below the surface, silty clay loam is mapped across 53 percent of the area, and average clay content is 37 percent. Mapped Angelo and Ector patterns help us plan Ozona bores, but they are not test borings. Clay can stay around the reamer and grip pipe, so the actual route near Avenue I still needs site review.
| USDA soil survey, inside the Ozona mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Angelo 49 percent, Ector 37 percent, Sanderson 4 percent, Noelke 4 percent and Iraan 4 percent |
| Texture at the surface | silty clay loam 53 percent, very cobbly clay loam 37 percent and gravelly loam 4 percent |
| Texture about 40 inches down | silty clay loam 53 percent, bedrock 40 percent and very gravelly loam 4 percent |
| Engineering class about 40 inches down | lean clay (CL) 53 percent and clayey gravel (GC) 4 percent |
| Average clay content about 40 inches down | 37 percent |
| Bedrock mapped within 60 inches | 40 percent of the area (40 percent hard rock, 0 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 54 percent of the area |
Bedrock is mapped within 40 inches across 40 percent of Ozona, so a route near Gurley Draw may move between soil and rock. The map also includes Quaternary deposits and Early Cretaceous sedimentary rock. No seasonal water table is mapped within 60 inches, while flood prone soils cover 4 percent. High steel corrosion risk is mapped across 54 percent, a concern for uncoated steel casing or tracer wire; the line owner selects any coating.
How do we plan bore depth through Ozona’s silty clay loam near Gurley Draw?
Angelo silty clay loam can hold an open hole and cling to the reamer. Near Avenue East, we match fluid and reaming to the ground, then track the drill head and log its depth and pitch.
- Angelo silty clay loam can stick to a reamer, so we use thinner fluid with polymer and ream in stages before pulling pipe promptly.
- Where the mapped ground shifts toward bedrock near Gurley Draw, we slow down and watch steering as the drill moves between soil and rock.
- Along Avenue East, we keep fluid pressure low enough to avoid lifting pavement and expose marked utilities by hydrovac before drilling near them.
- At a Gurley Draw crossing, we plan the bore below the channel and check for federal waterway jurisdiction while the crossing is being planned.

Which crossings near Avenue East should we plan for in Ozona?
Interstate 10 crosses Ozona, and Texas State Highway 163 also runs inside the mapped community boundary. Texas State Highway 137 is 0.9 miles outside it. On local routes, Avenue East is the longest named street at 2.24 miles; 11th Street runs 1.28 miles and Avenue I runs 1.16 miles. A bore plan can avoid cutting these paved routes, but the route, depth and access points need to fit the specific crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 | Interstate | 6.1 roadway miles inside | State highway office |
| Texas State Highway 163 | State highway | 3.4 roadway miles inside | State highway office |
| RM 2398 | State highway | 0.3 roadway miles inside | State highway office |
| Texas State Highway 137 | Highway nearby | 0.9 miles outside | State highway office |
| Gurley Draw | Stream | 1.63 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Ozona or within one mile outside the boundary, and none is mapped at a street and rail crossing. Gurley Draw runs 1.63 channel miles through the community, with 18 mapped street crossings of named streams. Crockett County maps show no lakes or ponds within one mile of Ozona, so we can focus route checks on other mapped crossings. A proposed Gurley Draw crossing needs depth planning and a check for federal waterway jurisdiction during planning.
Who has to sign off on Ozona work in Crockett County?
Ozona has no city government, so its streets and local permits belong to the county, while Interstate 10, Texas State Highway 163 and nearby Texas State Highway 137 are state routes. Work in highway right of way needs a TxDOT utility permit reviewed by the TxDOT San Angelo District. The utility that owns the line submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. Lines beneath existing highway pavement are bored or tunneled. Gurley Draw also needs a jurisdiction check during crossing planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities have lines in Crockett County near Ozona?
The water provider for a specific Ozona address must be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not match a system to this place. AEP Texas North, Texas-New Mexico Power, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative report electric service in Crockett County. The actual owner of a line near Avenue East must be confirmed before conduit work, and that owner can provide the conduit specifications.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas North, Texas-New Mexico Power, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative | Electric utilities reporting service in Crockett County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Ozona’s median housing year at 1977; 36 percent of housing was built before 1960 and 33 percent in 2000 or later. A bore near 11th Street might serve a new connection or replace older buried pipe, so the route needs checking rather than assumptions about line age. We hydrovac pothole marked utilities on the bore path before drilling near them; paint shows position, not depth.

Where is Ozona in relation to Sonora and nearby places?
Ozona is the county seat of Crockett County, at an elevation of 2,323 feet and with 4.67 square miles of mapped land. Its ZIP code is 76943. Sonora is 34.9 miles east; Sheffield is 36.6 miles west, and Big Lake is 36.7 miles northwest. Our Yukon, Oklahoma yard is 462 road miles away, a drive of 9.4 hours. That distance affects mobilization for work around Interstate 10, so the route, equipment and scope matter when planning a crew visit.
Places near Ozona
- Directional boring in Sonora: 34.9 miles east
- Directional boring in Sheffield: 36.6 miles west
- Directional boring in Big Lake: 36.7 miles northwest
- Directional boring in Eldorado: 37.6 miles east
- Directional boring in Iraan: 43.6 miles west
What would we bore near 11th Street in Ozona?
- Highway crossing: A bore beneath Interstate 10 needs a route that stays below the highway pavement and fits the TxDOT permit plan.
- Water service: A service line near Avenue East needs the address specific water provider confirmed before its bore route is set.
- Fiber conduit: A conduit run along 11th Street needs marked utilities exposed where the planned path crosses them.
- Creek crossing: A Gurley Draw bore needs channel depth planning and a jurisdiction check during planning.
- Street crossing: A route beneath Avenue I can use a bore to leave pavement uncut, with pits placed in dirt on each side.
- Rock and soil bore: Where Angelo soil gives way to mapped bedrock, the drill plan must account for slower progress and steering changes.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for an Ozona bore near Gurley Draw?
For a Gurley Draw crossing, start with the address or map pin, then tell us what goes underground, the pipe or conduit size and the footage. A sketch or plans showing the crossing and nearby streets such as Avenue East help us review access and the bore path. Call (405) 409-7423; a person answers 24 hours a day.
Along Interstate 10 in Ozona, we base pricing on the defined bore scope, including crossing conditions and required work. In Ozona, soil and rock conditions come first: Angelo clay can load the reamer, and bedrock may occur near the surface. Crossing count and exposure work matter around Avenue East, while pavement and a Gurley Draw crossing add planning needs. Pipe size, length, pits, excavator time and sand backfill also shape the work. Mobilization from Yukon matters at 462 road miles, as do high profile or emergency demands.
Questions people ask about boring in Ozona
Does Trinity take directional boring work in Ozona and Crockett County, and who staffs it?
Yes. We take Ozona work with our own crews or crews from satellite yards operated by drilling contractors we have vetted. For planned work near 11th Street in Ozona, we coordinate with Trinity through the bore log, regardless of which crew is on site. For a route near Interstate 10, the job still depends on the planned line, access and required permits.
Can a line be bored under Gurley Draw in Ozona?
A bore can be planned beneath Gurley Draw, which runs 1.63 channel miles through Ozona. The profile needs to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The route and ground conditions determine the required bore approach.
Who owns electric lines in Ozona and Crockett County, and who confirms conduit specs?
AEP Texas North, Texas-New Mexico Power, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative report service in Crockett County. That does not identify the owner at every Ozona address. Confirm the specific line owner before planning a conduit bore, then use that owner’s conduit specifications for the route near Avenue East.
Who controls Avenue I in Ozona, and does a bore require cutting the street?
Ozona is unincorporated and has no city government, so local streets such as Avenue I fall under county authority. Directional boring can pass beneath pavement without an open cut, subject to the route and approvals that apply. The bore pits sit in dirt on each side of the street.
Could older buried lines near 11th Street in Ozona need replacement bores?
They could. The American Community Survey 2019 to 2023 estimates put the median housing year at 1977, with 36 percent of homes built before 1960. That history can make replacement work relevant near 11th Street, but it does not establish a pipe’s age. Potholing verifies marked lines before drilling near them.
Does Angelo soil in Ozona corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 54 percent of Ozona, including areas with Angelo soil. That matters for uncoated steel casing and tracer wire. HDPE is not affected by this soil corrosion concern; the line owner chooses any coating for steel and selects the pipe material for the project.
How far is Ozona from Trinity’s Yukon, Oklahoma main office, and does that change the job?
Ozona is 462 road miles and a 9.4 hour drive from our Yukon yard. That distance can affect mobilization for work near Interstate 10, along with the equipment and crew time needed for the actual scope. The bore length, ground and crossings also shape the job plan.
How much notice does Texas811 need for an Ozona bore along Avenue East?
The locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it starts. If an Avenue East job slips more than 14 days past the original notice, a new request is needed. Before work continues near Avenue I in Ozona, we have worn or moved marks refreshed through Texas811.
What affects the cost of a directional bore near Interstate 10 in Ozona?
The price depends on the specific work, not a standard rate. Angelo clay, possible bedrock, bore length and pipe size all matter. So do utility exposures, pavement, pits, creek or drainage crossings and excavator time. Interstate 10 requirements and the 462 road miles from Yukon can affect planning and mobilization.
Where the Ozona facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Ozona
- U.S. Census Bureau, TIGER/Line 2024: Ozona boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Ozona population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Ozona housing units and year built
- Macrostrat geologic map compilation: map units under Ozona
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Crockett County
- U.S. Geological Survey, Elevation Point Query Service: Ozona elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Ozona
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Ozona
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Ozona, Texas
Type the address of your job in Ozona. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Ozona
All counties: Texas county list.
