trinityboringsolutions.com

Waelder Texas Directional Boring: Crockett Soil, Union Pacific and Baldridge Creek

Quick Answer: Waelder is a small incorporated city, so its streets belong to the city; we take directional boring, also called horizontal directional drilling (HDD), for routes under Railroad Street. From our Yukon, Oklahoma main office, Waelder is 468 road miles away, and the Union Pacific track is one route constraint to plan around. The USDA soil survey maps Crockett fine sandy loam across 31 percent of the city, while clay accounts for 80 percent of mapped soil at 40 inches. That Crockett clay calls for controlled drilling fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Waelder bores at a glance

  • Incorporated city in Gonzales County, Texas. Population 955 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 468 miles, about 8.9 hours of driving.
  • Ground: Crockett soil is mapped on 40 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 36 percent of the area.
  • Highways inside the boundary: US 90, FM 1115, FM 1296 and Texas State Highway 97. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: Union Pacific, with 10 mapped street and rail crossings.
  • Named streams inside the boundary: Baldridge Creek.
  • Public water: City of Waelder, groundwater wells.
  • Electric: City of Waelder municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring near Baldridge Creek in Waelder?

Waelder is a small city in Gonzales County, with a population of 955 in the Census Bureau Vintage 2024 estimate. We take directional boring work in Texas, including routes for water, sewer, gas, electric conduit and fiber. Those lines could run beneath Railroad Street or other city streets without an open cut across the pavement.

Our main office is in Yukon, Oklahoma, and Waelder work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have given us experience relevant to planning through the Crockett clay mapped around Waelder. We stay involved from the first call through the bore log, whichever crew is on site.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

How does Crockett soil affect a bore in Waelder?

The USDA soil survey maps Crockett soil across 40 percent of Waelder, including Crockett fine sandy loam on 31 percent of the mapped area. At the surface, fine sandy loam covers 50 percent and clay loam covers 33 percent. About 40 inches down, clay accounts for 80 percent of mapped soil, with average clay content of 41 percent. We use Waelder mapped soil patterns as planning guidance, not as test borings for a bore. That deeper clay can get sticky and grip the reamer or pipe, so the bore plan has to account for staged reaming and fluid control.

USDA soil survey, inside the Waelder city limitsWhat is mapped
Soil series mappedCrockett 40 percent, Wilson 20 percent, Degola 14 percent, Normangee 8 percent and Tabor 6 percent
Texture at the surfacefine sandy loam 50 percent, clay loam 33 percent and sandy clay loam 10 percent
Texture about 40 inches downclay 80 percent, sandy clay loam 14 percent and clay loam 6 percent
Engineering class about 40 inches downfat clay (CH) 58 percent and lean clay (CL) 42 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches36 percent of the area (0 percent hard rock, 36 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils14 percent of the area
High corrosion risk for uncoated steel80 percent of the area

Weathered bedrock is mapped within 60 inches across 36 percent of Waelder, with a typical depth of 53 inches; hard bedrock is not mapped in that interval. Seasonal water tables within 60 inches are not mapped, but flood prone soils cover 14 percent of the city, so a route near Baldridge Creek needs channel depth planning. High steel corrosion risk is mapped across 80 percent, a concern for steel casing and tracer wire that the line owner should address. The Yegua Formation, of Bartonian age, is mapped here and includes clay with minor sandstone beds.

How do crews handle clay in Waelder?

Waelder’s mapped Crockett clay and Yegua Formation call for attention to fluid, reaming and the route. We adjust the drilling approach to the ground and keep the planned path clear of marked utilities.

  1. With clay mapped at 80 percent of soil at 40 inches, we use thinner fluid and ream in stages to limit sticky buildup on the reamer.
  2. Near US 90 pavement, we watch fluid returns and pressure so the heavy Crockett clay does not force fluid up beneath the road surface.
  3. Before a bore along 1st Street gets near a marked utility, we hydrovac expose it, then track the drill head from the surface and log depth and pitch.
  4. At Baldridge Creek, we plan depth beneath the channel and check for Corps jurisdiction; the 14 percent mapped flood prone soils also call for route attention.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Which Waelder roads or creeks might a bore cross near Union Pacific?

US 90 runs 2.3 mapped roadway miles within Waelder, while FM 1115 has 0.7 miles, FM 1296 has 0.6 miles and Texas State Highway 97 has 0.5 miles. Interstate 10 lies 0.7 miles outside the city limits. Railroad Street is the longest named street at 2.84 miles, followed by 2nd Street at 1.63 miles and 1st Street at 1.22 miles. The road and pavement route matters because a bore can pass below a crossing rather than cut across it.

CrossingTypeMapped extentWho has a say
US 90US highway2.3 roadway miles insideState highway office
FM 1115State highway0.7 roadway miles insideState highway office
FM 1296State highway0.6 roadway miles insideState highway office
Texas State Highway 97State highway0.5 roadway miles insideState highway office
Interstate 10Highway nearby0.7 miles outsideState highway office
Union PacificRailroad1.78 track miles insideThe railroad
Baldridge CreekStream1.5 channel miles insideChecked for Corps of Engineers jurisdiction
Boggy CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Reed BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Sandy BranchStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.78 track miles inside Waelder on its Glidden Subdivision, and public records map 10 street and rail crossings in the city. Any route beneath that track requires an agreement with Union Pacific specifying crossing conditions. Baldridge Creek runs 1.5 channel miles inside city limits, and public records map two street crossings of named streams. A creek route needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction. In Waelder, no lakes or ponds are mapped within one mile, so we plan without a mapped water crossing in that radius.

Whose permission does a bore near US 90 in Waelder need?

The line owner, not Trinity, files a TxDOT utility permit through RULIS for work in the right of way on US 90, FM 1115, FM 1296 or Texas State Highway 97. TxDOT’s Yoakum District reviews the application; we prepare the bore plan and profile for the owner to use. Electric and communication lines need 60 inches of cover at a highway crossing and 48 inches along the right of way. Water needs 60 inches at crossings and 36 inches along the right of way; pressurized sewer needs 60 inches at crossings. TxDOT can set another depth. Existing highway pavement is bored or tunneled, and a Union Pacific crossing requires the railroad’s agreement. A Baldridge Creek crossing is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines in Gonzales County near Waelder?

The City of Waelder public water system uses groundwater wells and reports 617 service connections serving 970 people. Waelder owns its municipal electric system, so we account for that system when planning utility clearance. Before planning an electric conduit bore near the Waelder water system or municipal electric lines, we confirm the line owner and expose marked utilities along the route with hydrovac potholing. Paint shows a marked line’s position, not its depth, so potholes help establish where the bore can pass.

Line ownerWhat it isSourceSize
City of WaelderPublic water systemGroundwater wells617 connections, 970 people served
City of Waelder municipal electric systemCity owned electric systemReports to the U.S. Energy Information AdministrationNone customers reported
AEP Texas Central, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and Guadalupe Valley Electric CooperativeElectric utilities reporting service in Gonzales CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Waelder’s American Community Survey 2019 to 2023 five year estimates put the median housing year at 1975, which we consider in underground planning. Waelder’s survey estimates 38 percent of homes were built before 1960, 45 percent from 1960 to 1999 and 17 percent in 2000 or later, informing our underground planning. Along 1st Street or 2nd Street, a replacement bore may need to connect to older buried lines, while a new service follows a different route. Before drilling in Waelder, we expose marked utilities so we can plan the bore path around them.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Waelder, including Gonzales?

Waelder is in Gonzales County, at an elevation of 386 feet, and covers 1.28 square miles. Its ZIP code is 78959. Flatonia is 11.6 miles east, Harwood is 12.4 miles west, Moulton is 12.4 miles southeast and Gonzales is 15.4 miles southwest. Gonzales is both the county seat and the nearest larger city. Waelder is 468 road miles and an 8.9 hour drive from our Yukon, Oklahoma main office, so that distance is part of planning a job along US 90 or Railroad Street.

Places near Waelder

What kinds of bores come up around Railroad Street in Waelder?

  • Highway crossing: A bore beneath US 90 can carry water, sewer or conduit lines below the roadway instead of cutting its pavement.
  • Water service: A new connection near the City of Waelder groundwater system can use a bore to pass beneath a street.
  • Fiber route: Along Railroad Street, a fiber conduit bore can cross pavement without an open cut across the street.
  • Rail crossing: A route under the Union Pacific Glidden Subdivision needs the railroad’s agreement and its crossing conditions.
  • Creek crossing: A Baldridge Creek bore needs depth planning beneath the channel and a check for Corps jurisdiction.
  • Street replacement: A bore near 2nd Street can route replacement pipe beneath the street while marked utilities are exposed first.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near D Avenue in Waelder?

For a quote near D Avenue, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us read the route. Those details show whether the work approaches US 90, Union Pacific track or a city street and what access the bore needs.

For Waelder, we set the price according to the scope of each boring job. Waelder is 468 road miles from Yukon, so mobilization is part of the estimate. Crockett clay and the mapped Yegua Formation affect drilling and reaming; crossings of US 90, Union Pacific track or Baldridge Creek add route and planning needs. Pipe size and bore length matter, as do exposed utilities, pavement, pits, excavator time, sand backfill and any high profile or emergency work.

Questions people ask about boring in Waelder

Does Trinity take directional boring jobs in Waelder and Gonzales County?

Yes. We take directional boring work in Waelder and staff it with our own crews or crews from vetted partner drilling contractors. Our main office is in Yukon, and Trinity remains your contact from the first call through the bore log. A job beneath Railroad Street is planned around its route, soil and crossings.

Who is responsible for 1st Street in Waelder, and does a bore require cutting it?

Waelder is incorporated, so the city owns its streets, including 1st Street. A directional bore can pass beneath the street without cutting its pavement. The route still needs to account for marked utilities and any road or other crossing conditions relevant to the proposed work.

Does Waelder’s older housing near 2nd Street affect replacement bores?

It can affect what needs to be located before work. The American Community Survey 2019 to 2023 estimates Waelder’s median housing year at 1975, with 38 percent of homes built before 1960. A replacement line near 2nd Street may meet older buried utilities, so marked lines on the bore path are exposed before drilling near them.

Are bore pits near Baldridge Creek in Waelder affected by groundwater or flooding?

Flood prone soils are mapped across 14 percent of Waelder, and Baldridge Creek runs through the city, so a nearby route needs attention to channel depth and pit placement. Seasonal water tables within 60 inches are not mapped. Creek crossings are also checked for U.S. Army Corps of Engineers jurisdiction during planning.

Can Waelder’s Crockett soil corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 80 percent of Waelder. The line owner should consider the material and any coating for steel casing or tracer wire. For underground work in Waelder, we recognize that soil corrosion does not affect HDPE. Crockett soil is one mapped local soil series, but the survey is not a substitute for testing at the bore route.

What ground will a directional bore pass through in Waelder near Crockett soil?

The USDA soil survey maps Crockett soil across 40 percent of the city, including fine sandy loam. At about 40 inches, clay accounts for 80 percent of mapped soil and average clay content is 41 percent. That deeper clay can be sticky, so staged reaming and fluid control matter. These map patterns are not test borings.

What bore sizes and lengths can Trinity handle for a job near D Avenue in Waelder?

For Waelder bores, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A proposed route near D Avenue still needs to be reviewed for footage, pipe or conduit size, soil and crossings. Send a sketch or plans if you have them.

How early should I call Texas811 for a bore near Railroad Street in Waelder?

For a Railroad Street start, place the Texas811 request at least 48 hours beforehand, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before excavation. When a Waelder start slips more than 14 days past the original notice, we require a new request. In Waelder, we require worn or moved marks to be refreshed through Texas811 before work continues.

What changes the cost of directional boring under US 90 in Waelder?

The route and job details determine the price, not just footage. A US 90 crossing, Waelder’s 468 road miles from Yukon, Crockett clay, pipe size and bore length all affect the estimate. So can exposed utilities, pavement, creek crossings, pits, excavator time, sand backfill and high profile or emergency work.

Where the Waelder facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Waelder

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Waelder, Texas

Type the address of your job in Waelder. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Waelder

Same county: Nixon · Smiley. All counties: Texas county list.