trinityboringsolutions.com

Borger Texas Directional Boring: Obaro Soil, Texas State Highway 136 and Hill Creek

Quick Answer: Can you get a line beneath Texas State Highway 136, Panhandle Northern Railroad track or Hill Creek without cutting the surface? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Texas for crossings like these. Borger is 232 road miles from our Yukon, Oklahoma main office, and Wilson Street runs 8.83 miles within the city. Obaro is the leading mapped soil series in Borger. The USDA soil survey maps bedrock within 60 inches across 45% of the city, so we plan for ground that can change along the bore path.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Borger bores at a glance

  • Incorporated city in Hutchinson County, Texas. Population 11,892 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 232 miles, about 4.8 hours of driving.
  • Ground: Obaro soil is mapped on 42 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 45 percent of the area.
  • Highways inside the boundary: Texas State Highway 136, Texas State Highway 207, Texas State Highway 152, FM 1551 and Spur 119. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: Panhandle Northern Railroad, with 15 mapped street and rail crossings.
  • Named streams inside the boundary: Hill Creek and Rock Creek.
  • Public water: Borger Municipal Water System, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring near Panhandle Northern Railroad in Borger?

Can you get a line beneath a Borger street or the Panhandle Northern Railroad without cutting across it? We take directional boring work in Borger and Hutchinson County. The Census Bureau Vintage 2024 estimate puts the city population at 11,892. We install water, sewer, gas, electric conduit and fiber, including service routes along Wilson Street or connections near the railroad.

Our main office is in Yukon, Oklahoma, and Borger work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa. A job near Cedar Street is a different scale, with its route, crossings and ground setting the bore plan. Our family business started in 1965, and we have done directional boring since 1982, experience we bring to Borger underground work planning.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

How does Obaro soil affect boring in Borger?

The USDA soil survey maps Obaro across 42% of Borger, with Veal mapped across 33%. Surface textures are chiefly loam at 50% and fine sandy loam at 40%. At about 40 inches below the surface, bedrock is mapped across 45% of the city, sandy clay loam across 22%, and gravelly loam across 18%. Average clay content at that depth is 23%, while sandy ground is mapped across 8%. These are mapped patterns, not test borings, so a route near Wilson Street still needs site specific planning.

USDA soil survey, inside the Borger city limitsWhat is mapped
Soil series mappedObaro 42 percent, Veal 33 percent, Tascosa 6 percent, Dumas 5 percent and Dallam 3 percent
Texture at the surfaceloam 50 percent, fine sandy loam 40 percent and gravelly loam 7 percent
Texture about 40 inches downbedrock 45 percent, sandy clay loam 22 percent and gravelly loam 18 percent
Engineering class about 40 inches downlean clay (CL) 28 percent, clayey gravel (GC) 18 percent and silty clayey gravel (GC GM) 7 percent
Average clay content about 40 inches down23 percent
Bedrock mapped within 60 inches45 percent of the area (0 percent hard rock, 45 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Weathered bedrock is mapped within 60 inches across 45% of Borger, while hard bedrock is not mapped at that depth. The typical mapped bedrock depth is 35 inches, so the bore may slow where weathered rock is present. Seasonal water tables and flood prone soils are not mapped in the city. High steel corrosion risk is also not mapped. The Permian age Quartermaster Formation and Whitehorse Group, undivided, includes shale, siltstone, sandstone, gypsum and dolomite, which can mean changing material along a route near Hill Creek.

How do crews handle bedrock in Borger?

Borger soil mapping shows both weathered bedrock and loose surface textures. We match the drilling setup to the route, track the head from the surface, and adjust when the ground changes near a street or crossing.

  1. With bedrock mapped within 60 inches across 45% of Borger, we check the ground as the bore advances and use a suitable bit for weathered rock.
  2. Where Obaro and fine sandy loam are mapped, staged reaming and drilling fluid help keep loose material stable as the bore opens.
  3. Near Hill Creek, we plan the route to stay below the channel and check whether the crossing falls under federal water jurisdiction.
  4. Along Wilson Street, we hydrovac pothole marked utilities before drilling nearby, then track the drill head and log its depth and pitch.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where does a line have to go under Hill Creek in Borger?

Texas State Highway 136, Texas State Highway 207 and Texas State Highway 152 run within Borger, along with FM 1551 and Spur 119. A route under an existing highway pavement is bored or tunneled rather than open cut. Wilson Street is the longest named street at 8.83 miles in the city; Cedar Street runs 3.93 miles and Fairlanes Boulevard runs 3.24 miles. Those long corridors can put a bore near pavement, driveways or other marked lines, so the exact crossing and access points shape the route.

CrossingTypeMapped extentWho has a say
Texas State Highway 136State highway9.8 roadway miles insideState highway office
Texas State Highway 207State highway5.4 roadway miles insideState highway office
Texas State Highway 152State highway4.3 roadway miles insideState highway office
FM 1551State highway3.2 roadway miles insideState highway office
Spur 119State highway2 roadway miles insideState highway office
Spur 245State highway0.8 roadway miles insideState highway office
RM 3474State highway0.6 roadway miles insideState highway office
Panhandle Northern RailroadRailroad11.44 track miles insideThe railroad
Hill CreekStream0.69 channel miles insideChecked for Corps of Engineers jurisdiction
Rock CreekStream0.16 channel miles insideChecked for Corps of Engineers jurisdiction
Patton CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Dixon CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Pantex ReservoirLake or pond25 acres, nearbyChecked for Corps of Engineers jurisdiction
Weatherly LakeLake or pond8 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Panhandle Northern Railroad has 11.44 track miles within Borger, and public mapping shows 15 street and rail crossings. A line under its tracks needs an agreement with the railroad owner that sets crossing conditions. Hill Creek runs 0.69 channel miles inside the city, and seven mapped street crossings intersect named streams. Rock Creek also runs inside the limits, while Weatherly Lake is within the city. A creek route is checked for federal water jurisdiction during planning.

Do I need a permit to bore under Texas State Highway 136 in Borger?

At Texas State Highway 136 crossings, cover is a key part of the bore plan: electric and communication lines need 60 inches below the lowest crossed grade, while water lines need 60 inches and pressurized sewer lines need 60 inches at crossings. TxDOT Utility Accommodation Rules also set along right of way depths, and the district may require another depth. The line owner files the utility permit through TxDOT RULIS; TxDOT Amarillo District reviews it, while we prepare the bore plan and profile for the owner. Highway pavement is bored or tunneled, and the crossing is encased. Borger city streets belong to the city. A Panhandle Northern Railroad crossing also requires an agreement with its owner. Hill Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near Borger Municipal Water System lines?

Borger Municipal Water System is locally owned, uses surface water, and serves 12,419 people through 5,749 service connections. A bore beside its lines needs the marked utilities exposed before drilling near them. Southwestern Public Service, North Plains Electric Cooperative and Rita Blanca Electric Cooperative report electric service in Hutchinson County. Before planning electric conduit along Wilson Street, we confirm which provider owns the line at that route rather than assume one utility serves every address.

Line ownerWhat it isSourceSize
Borger Municipal Water SystemPublic water systemSurface water5,749 connections, 12,419 people served
Southwestern Public Service, North Plains Electric Cooperative and Rita Blanca Electric CooperativeElectric utilities reporting service in Hutchinson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Borger’s median housing year at 1964; 40% of homes were built before 1960, 54% from 1960 to 1999, and 6% in 2000 or later. That mix can mean replacement work as well as new service routes near Cedar Street. Before the drill approaches a marked water or electric line, hydrovac potholing exposes it; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Borger in relation to Amarillo and nearby towns?

Borger is an incorporated city in Hutchinson County, with 9.03 square miles of land at an elevation of 3,090 feet. ZIP code 79007 serves Borger, helping us verify the location before planning underground work. Sanford is 7.9 miles west, Fritch is 11.0 miles west, and Stinnett, the county seat, is 11.5 miles north. Amarillo is 40.1 miles southwest. Our Yukon yard is 232 road miles away, a 4.8 hour drive, so that distance is part of planning mobilization for a Wilson Street or Hill Creek route.

Places near Borger

What kinds of bores come up near Cedar Street in Borger?

  • Highway crossing: A bore beneath Texas State Highway 136 is planned to meet TxDOT cover and pavement requirements without cutting across the travel lanes.
  • Water service: A service route near Borger Municipal Water System lines starts with locating and exposing marked utilities along the planned path.
  • Fiber conduit: A run along Cedar Street can be drilled beneath pavement and driveways, with the route shaped by the conduit size and existing utilities.
  • Creek crossing: A Hill Creek bore stays below the channel, with the route checked for federal water jurisdiction during planning.
  • Rail crossing: A line beneath Panhandle Northern Railroad track needs an agreement with the track owner before the crossing is planned.
  • Park connection: A route serving an area near Johnson Park can be bored beneath sidewalks or paved access rather than open cut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Wilson Street bore in Borger?

For a Borger quote, send the address or map pin, what is going underground, the pipe or conduit size and the footage; a sketch or plans help. A route near Wilson Street is easier to scope when the crossing points and access areas are shown. We can discuss the bore path and needed potholing from that information.

The route through Obaro soil and the chance of weathered bedrock matter because the ground can change the drilling setup and pace. The number of utilities to expose, pavement or concrete, and any Hill Creek drainage crossing also affect the work. Pipe size and bore length matter, as do pits, excavator time and sand backfill. A crossing at Texas State Highway 136 adds permit planning, and Borger’s 232 road miles from Yukon affect mobilization. High profile or emergency work changes the scope too.

Questions people ask about boring in Borger

Does Trinity Boring Solutions take directional boring jobs in Borger and Hutchinson County?

Yes. We take directional boring work in Borger and Hutchinson County, with crews from our Yukon main office and satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a route near Wilson Street or Panhandle Northern Railroad.

How much rock is mapped in Borger, and is it hard bedrock?

The USDA soil survey maps bedrock within 60 inches across 45% of Borger, and maps that bedrock as weathered rather than hard. Typical mapped depth is 35 inches. That can slow a bore or call for a different bit along a route, but the soil map is not a test boring for a specific Wilson Street address.

For a bore under Texas State Highway 136 in Borger, who approves the crossing?

The utility owner submits the right of way permit application through TxDOT RULIS, and TxDOT Amarillo District reviews it. For a Texas State Highway 136 crossing, we provide the bore plan and profile for the owner and work under the permit issued to that owner. The permitted plan sets the required cover for the line.

What does a Borger bore beneath Panhandle Northern Railroad track need?

It needs an agreement from Panhandle Northern Railroad, which owns 11.44 track miles inside Borger. The railroad sets crossing conditions such as casing, depth and flagging. If a line also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.

Can you bore a line under Hill Creek in Borger?

Yes, a bore can be planned beneath Hill Creek, which has 0.69 channel miles within Borger. The route must account for the channel and is checked during planning for U.S. Army Corps of Engineers jurisdiction. Site conditions and the line path determine the bore profile.

When planning underground work near Borger’s public water system, who runs it and where does its water come from?

Borger Municipal Water System is owned by local government and draws from surface water. Borger’s water system serves 12,419 people through 5,749 service connections, so we plan underground work with that network in mind. For a bore near its lines, the route is checked and marked utilities are exposed before drilling gets close.

Does Trinity cover Sanford and rural sites outside Borger?

Yes. We take work in Texas beyond Borger city limits, including Sanford and rural locations in Hutchinson County. Sanford is 7.9 miles west of Borger. The address and route help us plan access, crossings and mobilization from our Yukon main office.

How much notice does Texas811 need for a Borger bore along Wilson Street?

The locate request for a Wilson Street bore must be made at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes the notice as at least two working days, which we include when scheduling Borger work. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore under Texas State Highway 136 in Borger?

The price depends on the route and scope, including bore length, pipe or conduit size, and the Obaro soil or weathered bedrock along the path. Utility exposures, pavement, pits and equipment time also matter. A Texas State Highway 136 permit crossing adds planning, while the 232 road miles from Yukon affect mobilization.

Where the Borger facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Borger

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Borger, Texas

Type the address of your job in Borger. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Borger

All counties: Texas county list.