trinityboringsolutions.com

Crawford Texas Directional Boring: Bolar Soil, FM 185 and Tonk Creek

Quick Answer: Can your line pass beneath FM 185 without cutting its pavement? Yes, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Crawford crossings such as FM 185. The Yukon main office is 321 road miles away, so a Tonk Creek crossing and its access affect mobilization. Bolar soil is common, and gravelly clay loam can make reaming and fluid control matter. We plan the route around the creek, pavement and marked lines.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Crawford bores at a glance

  • Incorporated city in McLennan County, Texas. Population 927 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 321 miles, about 6.3 hours of driving.
  • Ground: Bolar soil is mapped on 30 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 83 percent of the area.
  • Highways inside the boundary: FM 185 and Texas State Highway 317. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Tonk Creek, North Tonk Creek and Wasp Creek.
  • Public water: City of Crawford, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near FM 185 in Crawford?

Trinity Boring Solutions takes directional boring work in Crawford, McLennan County, where the Census Bureau Vintage 2024 estimate puts the population at 927. Can we get water, sewer, gas, electric conduit or fiber beneath 4th Street or FM 185? We install those lines by boring, with the route and crossing conditions shaping the plan.

Our main office is in Yukon, Oklahoma, and Crawford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters around the City of Crawford water lines and the electric providers reported in McLennan County. On projects near FM 185 in Crawford, our family business dates to 1965, and we have done directional boring since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does a bore meet in Crawford near Bolar soil?

The USDA soil survey maps Bolar soil across 30% of Crawford, with Denton at 22% and Eckrant at 20%. At about 40 inches, silty clay covers 41% of the mapped area and gravelly clay loam covers 34%; very cobbly silty clay accounts for 20%. In Crawford, no sandy area is mapped at that depth, which we consider when planning directional boring. These are soil survey patterns, not test borings, so a route near Bolar soil still needs site specific planning. Clay can hold an open hole but stick to the reamer, while gravelly material can make the drill head wander.

USDA soil survey, inside the Crawford city limitsWhat is mapped
Soil series mappedBolar 30 percent, Denton 22 percent, Eckrant 20 percent, Frio 9 percent and Oglesby 5 percent
Texture at the surfacesilty clay 41 percent, gravelly clay loam 34 percent and very cobbly silty clay 20 percent
Texture about 40 inches downbedrock 62 percent, silt loam 22 percent and silty clay loam 9 percent
Engineering class about 40 inches downlean clay (CL) 22 percent and fat clay (CH) 14 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches83 percent of the area (83 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel42 percent of the area

The USDA soil survey maps bedrock within 60 inches across 83% of Crawford, with hard bedrock mapped across the same share; typical depth is 33 inches. Weathered bedrock is not mapped there. No seasonal water table is mapped within 60 inches, while flood prone soils cover 9%, so Tonk Creek routes need depth planning below the channel. High steel corrosion risk is mapped across 42%, which makes casing and tracer wire material a line owner concern. Terrace deposits of sand, silt, clay and gravel are Cenozoic; Early Cretaceous sedimentary rock includes chalk, limestone, mud and sandstone.

How do crews handle Crawford bedrock and clay?

In Crawford, crews adapt the bore to Bolar soil, gravelly clay loam and bedrock mapped as shallow as 33 inches. A route near Tonk Creek also needs depth planning and careful control of the drilling fluid.

  1. Bolar soil is mapped across 30% of Crawford. In clay, we use thinner drilling fluid and staged reaming to limit sticky buildup on the reamer.
  2. Gravelly clay loam covers 34% of the mapped area at about 40 inches. We keep the pipe ready before the final ream so the hole is not left open.
  3. Bedrock is mapped within 60 inches across 83% of Crawford, with typical depth at 33 inches. Where the route meets hard rock, crews may need rock drilling equipment and slower progress.
  4. For each marked utility on a Crawford bore path, we hydrovac pothole before the drill approaches. A route under 4th Street means exposing marked lines before working near the pavement.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What does a bore have to cross in Crawford near Tonk Creek?

FM 185 and Texas State Highway 317 run inside Crawford, so work beneath their pavement calls for a bore or tunnel rather than an open cut. Lone Star Parkway runs 1.76 miles inside town, 4th Street runs 1.92 miles, and 5th Street runs 1.57 miles. A route on any of them needs enough room for entry and exit pits outside the pavement, plus a plan for marked utilities and driveways. The TxDOT Waco District reviews state highway right of way work.

CrossingTypeMapped extentWho has a say
FM 185State highway2.3 roadway miles insideState highway office
Texas State Highway 317State highway1.5 roadway miles insideState highway office
BNSF RailwayRailroad1.04 track miles insideThe railroad
Tonk CreekStream1.28 channel miles insideChecked for Corps of Engineers jurisdiction
North Tonk CreekStream0.32 channel miles insideChecked for Corps of Engineers jurisdiction
Wasp CreekStream0.11 channel miles insideChecked for Corps of Engineers jurisdiction
Middle Bosque RiverStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Bluff CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 1.04 track miles inside Crawford on its Fort Worth Subdivision, and five mapped street and rail crossings make track locations part of route planning. Tonk Creek runs 1.28 channel miles in town, with North Tonk Creek at 0.32 miles and Wasp Creek at 0.11 miles. Seven mapped street crossings intersect named streams. A bore can keep pavement, tracks and creek banks uncut, with pits set on either side.

Do I need a permit to bore in Crawford, McLennan County?

For a bore beneath FM 185 or Texas State Highway 317, the required cover sets the drilling depth: electric and communication lines need 60 inches below the lowest crossed grade, water needs 60 inches, and pressurized sewer needs 60 inches. TxDOT may set a different depth. The line owning utility files the right of way application through RULIS, and the TxDOT Waco District reviews it; we prepare the bore plan and profile for that filing. Crawford city streets belong to the city. A BNSF Railway crossing needs an agreement with BNSF, and Tonk Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near Crawford’s City of Crawford water system?

The City of Crawford public water system uses surface water and has 389 service connections serving 950 people. For an electric conduit bore near 4th Street, we confirm the line owner because Oncor Electric Delivery Company, Texas New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative report service in McLennan County. Those county reports do not identify the provider at every Crawford address.

Line ownerWhat it isSourceSize
City of CrawfordPublic water systemSurface water389 connections, 950 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in McLennan CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Crawford’s median housing year at 1974; 23% of homes were built before 1960, 50% from 1960 to 1999 and 27% in 2000 or later. That mix can mean replacement work on older service lines as well as new connections along Lone Star Parkway. Before drilling near a marked line, we hydrovac pothole it because paint shows position, not depth. For example, a marked utility on a route under 4th Street must be exposed before the drill approaches.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

What is near Crawford, including Valley Mills?

Crawford is in McLennan County at an elevation of 699 feet and covers 1.44 square miles. Crawford’s ZIP codes are 76638 and 76657, which help us confirm the location before planning underground work. McGregor is 8.3 miles south, and Valley Mills is 8.4 miles north; Waco, the county seat, is 15.2 miles east. From the Yukon yard, Crawford is 321 road miles away, about a 6.3 hour drive, which affects mobilization for a job near FM 185 or Tonk Creek. Crawford is part of the Waco Metropolitan Statistical Area and is known as the home of George W. Bush’s Prairie Chapel Ranch, just outside town.

Places near Crawford

What would we bore near Lone Star Parkway in Crawford?

  • Highway crossing: A bore beneath FM 185 or Texas State Highway 317 keeps the existing pavement intact and follows the depth set for the line type.
  • Water service: A new service near the City of Crawford system needs a route that accounts for existing water lines and nearby street crossings.
  • Fiber drop: A conduit route along Lone Star Parkway can use a bore to cross pavement without opening a trench across the street.
  • Creek crossing: A Tonk Creek bore needs depth planning below the channel and a check for Corps jurisdiction during planning.
  • Rail crossing: A route beneath BNSF Railway needs the railroad’s crossing agreement and a plan suited to its track requirements.
  • Street utility: Work beneath 4th Street needs marked utilities exposed and entry pits placed so the paved route stays uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Crawford quote near Winding Trail?

For a Crawford quote near FM 185, send the address or map pin, what will go in the ground, pipe or conduit size, footage, and any sketch or plans. A route on Winding Trail may differ from one under FM 185 because pavement, nearby utilities and entry pit access change the work. A Tonk Creek crossing also needs its own route details.

Price reflects the work, not just the distance of a bore. Crawford is 321 road miles from Yukon, so mobilization matters, and Bolar soil or shallow bedrock can affect drilling time and reaming. A crossing under BNSF Railway or FM 185 brings its own planning and access demands. We also account for pipe size, utilities to expose, pavement or concrete, creek crossings, pits, excavator time, sand backfill and any emergency schedule.

Questions people ask about boring in Crawford

Does Trinity take directional boring jobs in Crawford and McLennan County?

Yes, we take directional boring work in Crawford and across Texas. The job uses our own crews or a satellite yard operated by a partner drilling contractor we have vetted. You work with Trinity from the first call through the bore log, whether the route is near FM 185 or Tonk Creek.

What is Bolar soil like for a bore in Crawford?

The USDA soil survey maps Bolar soil across 30% of Crawford, and gravelly clay loam across 34% of the area at about 40 inches. Clay can stay open but cling to the reamer; gravel can shift the drill head. These mapped patterns are not a substitute for checking the actual route.

How much of Crawford has bedrock mapped within five feet?

Bedrock is mapped within 60 inches across 83% of Crawford, and hard bedrock is mapped across 83% as well. Typical bedrock depth is 33 inches, so a route may reach rock quickly. Weathered bedrock is not mapped within that depth range.

Who approves a bore under FM 185 in Crawford?

TxDOT reviews work in FM 185 right of way through its Waco District. The utility that owns the line applies through RULIS, using the bore plan and profile prepared for the application. Required cover depends on whether the line is electric, communication, water or pressurized sewer.

What does a Crawford bore under BNSF Railway need?

A crossing beneath BNSF Railway needs an agreement with the railroad that owns the track. Its crossing requirements set the conditions for the work, including casing, depth and flagging. The railroad has 1.04 track miles inside Crawford, so the route needs to identify the track crossing accurately.

Can a line be bored under Tonk Creek in Crawford?

A line can be planned to pass beneath Tonk Creek without cutting the creek bank. The route needs depth planning below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Tonk Creek runs 1.28 channel miles inside Crawford.

Does Trinity cover McGregor and rural sites outside Crawford?

Yes, we take work in McGregor, 8.3 miles south of Crawford, and at rural sites outside town. Trinity serves Oklahoma and Texas and also takes work in nearby states. Crawford work is staffed by our own crews or vetted partner drilling contractors, with Trinity handling the job through the bore log.

How early should I call Texas811 for a bore near 4th Street in Crawford?

Paint near 4th Street shows a utility’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, request again; worn or moved marks need refreshing through Texas811.

What affects directional boring costs near FM 185 in Crawford?

The route, footage, pipe or conduit size, soil and rock, and the number of utilities to expose all affect the price. Near FM 185, pavement and right of way planning can change the work; a Bolar soil route or shallow bedrock can affect drilling time. Creek crossings, pits, equipment time and the drive from Yukon also matter.

Where the Crawford facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Crawford

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Crawford, Texas

Type the address of your job in Crawford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Crawford

Same county: Waco · Hewitt · Robinson · Bellmead · Woodway · Lacy-Lakeview · West · Beverly Hills · Mart · Lorena · Moody · Bruceville-Eddy. All counties: Texas county list.