trinityboringsolutions.com

Hallsburg Texas Directional Boring: Heiden Clay, Shaw Creek And FM 3222

Quick Answer: FM 3222 and Shaw Creek are key route constraints where Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), in Hallsburg, Texas. The 309 road miles from our Yukon, Oklahoma main office matter for work near Hallsburg Road. Heiden clay is common in the USDA soil survey, so sticky cuttings and soil grip can affect reaming and pullback. A bore can pass beneath Shaw Creek without cutting its banks, subject to route planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hallsburg bores at a glance

  • Incorporated city in McLennan County, Texas. Population 452 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 309 miles, about 6 hours of driving.
  • Ground: Heiden soil is mapped on 41 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: FM 3222, FM 2957 and Texas State Highway 164. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Shaw Creek and Tradinghouse Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Shaw Creek in Hallsburg?

Trinity Boring Solutions takes directional boring work in Hallsburg, McLennan County, where FM 3222 and Shaw Creek can shape a bore route. Census Bureau Vintage 2024 estimates Hallsburg’s population at 452, a planning figure that does not establish subsurface conditions for our boring work. We install water, sewer, gas, electric conduit and fiber along routes such as Wilbanks Drive and Hallsburg Road, with the line path and existing utilities checked for each job.

Our main office is in Yukon, Oklahoma, and Hallsburg work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business dates to 1965, and we have done directional boring since 1982. Across more than 25 years, we have had no utility strike; near FM 3222, that record matters when planning around lines whose owners need to be identified.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA survey show about Heiden soils beneath Hallsburg?

The USDA soil survey maps Heiden soil across 41 percent of Hallsburg and Wilson soil across 39 percent. Surface texture is mapped as clay loam over 48 percent and clay over 47 percent of the city. At about 40 inches below the surface, 89 percent is mapped as clay, with average clay content of 47 percent. USDA mapped soil patterns around Hallsburg, including Heiden, guide our planning but are not substitutes for test borings. For a bore near Hallsburg Road, heavy clay can stick to the reamer and grip pipe during pullback.

USDA soil survey, inside the Hallsburg city limitsWhat is mapped
Soil series mappedHeiden 41 percent, Wilson 39 percent, Ferris 6 percent, Gowen 5 percent and Lamar 4 percent
Texture at the surfaceclay loam 48 percent, clay 47 percent and fine sandy loam 3 percent
Texture about 40 inches downclay 89 percent, sandy clay loam 5 percent and loam 4 percent
Engineering class about 40 inches downfat clay (CH) 90 percent and lean clay (CL) 9 percent
Average clay content about 40 inches down47 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel90 percent of the area

The survey maps bedrock within 60 inches across 6 percent of Hallsburg, with weathered bedrock mapped in that area and no hard bedrock mapped within that depth. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 5 percent. Across 90 percent of Hallsburg, mapped high steel corrosion risk means we consider casing and tracer wire materials for the line. The Quartz Sand Decomposition Residuum, Cenozoic in age, and the Wolfe City Formation, Phanerozoic in age, are mapped locally; the route still needs field evaluation.

How should we plan a clay bore in Hallsburg?

Hallsburg soil maps show heavy clay at depth, so we manage the drilling fluid and cuttings instead of forcing the reamer. On a route near Shaw Creek, we also watch returns closely to avoid building pressure under pavement.

  1. On routes through Heiden clay, we adjust fluid and ream in stages because sticky cuttings can gather on the reamer and clay can grip the pipe.
  2. Where heavy clay lies under pavement near FM 3222, we watch fluid returns and keep pressure controlled so drilling fluid does not lift the surface.
  3. Before drilling near any marked line along Wilbanks Drive, we expose it with hydrovac potholing because paint shows position but not depth.
  4. At Shaw Creek, we plan the bore below the channel and check for federal jurisdiction while keeping the creek bank and surface uncut.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What does a bore have to cross near FM 3222 in Hallsburg?

FM 3222 runs 2.1 mapped roadway miles inside Hallsburg, while FM 2957 accounts for 0.8 miles and Texas State Highway 164 for 0.7 miles. Texas State Highway 6 is 0.1 miles outside the limits, and US 84 is 1.3 miles away. Wilbanks Drive, Pavelka Drive and Hallsburg Road are the longest named streets. A bore under existing highway pavement is installed by boring or tunneling, keeping the road surface intact; a rural highway crossing also extends beneath all travel lanes.

CrossingTypeMapped extentWho has a say
FM 3222State highway2.1 roadway miles insideState highway office
FM 2957State highway0.8 roadway miles insideState highway office
Texas State Highway 164State highway0.7 roadway miles insideState highway office
Texas State Highway 6Highway nearby0.1 miles outsideState highway office
US 84Highway nearby1.3 miles outsideState highway office
Union PacificRailroad nearby0.2 miles outsideThe railroad
Shaw CreekStream0.68 channel miles insideChecked for Corps of Engineers jurisdiction
Tradinghouse CreekStream0.13 channel miles insideChecked for Corps of Engineers jurisdiction
Riggs CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Manos CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Tradinghouse Creek ReservoirLake or pond1,732 acres, insideChecked for Corps of Engineers jurisdiction
New Lake MartLake or pond122 acres, nearbyChecked for Corps of Engineers jurisdiction
Lake HallLake or pond35 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Hallsburg, and no street and rail crossing is mapped in the city. Union Pacific track is 0.2 miles outside the limits, so a route reaching it needs railroad coordination. Shaw Creek has 0.68 channel miles inside the city, and Tradinghouse Creek has 0.13; three mapped street crossings of named streams make creek alignment a local planning issue. Tradinghouse Creek Reservoir is inside the limits, so any lake crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a bore in McLennan County and Hallsburg?

Hallsburg is incorporated, so its city streets belong to the city, while FM 3222, FM 2957 and Texas State Highway 164 fall under TxDOT highway permitting. The utility owner, not Trinity, submits a right of way application through TxDOT’s RULIS system; Trinity prepares the bore plan and profile for that filing, and the TxDOT Waco District reviews it. Electric and communication crossings need 60 inches of cover below the lowest crossed grade, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. A Union Pacific crossing requires an agreement with the railroad, and Shaw Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in McLennan County near Hallsburg?

The water provider for a specific Hallsburg address must be confirmed with the city, McLennan County or the local water district before a bore is planned. Electric service reported in the county includes Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. Those reports do not identify the provider at each address, so the line owner must be confirmed before an electric conduit bore near FM 3222.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in McLennan CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Hallsburg’s median housing year at 1979; 10 percent of units were built before 1960, 71 percent from 1960 to 1999 and 19 percent in 2000 or later. That mix can mean either replacement work or new service along Wilbanks Drive. Before the drill approaches, our rule is to hydrovac pothole every marked utility on the planned path; a route beneath Wilbanks Drive is one local example where paint alone cannot show depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Hallsburg and nearby Riesel?

Hallsburg is an incorporated city in McLennan County, at an elevation of 523 feet and covering 2.72 square miles. Its ZIP codes are 76705, 76624, 76682 and 76664. Riesel is 4.3 miles south, and Mart is 6.8 miles east; Bellmead is 9.6 miles northwest. Waco, the county seat, is 14.4 miles west. Our Yukon yard is 309 road miles away, a 6.0 hour drive, which affects mobilization for work near FM 3222.

Places near Hallsburg

What kinds of bores come up along Hallsburg Road?

  • Highway crossing: A route under FM 3222 is bored beneath the travel lanes, with the line owner arranging the TxDOT right of way permit.
  • Water service: A service along Hallsburg Road needs its address specific water provider confirmed before the route and connection are planned.
  • Fiber conduit: A fiber route beneath Wilbanks Drive can use a bore to avoid opening the street surface.
  • Creek crossing: A bore under Shaw Creek needs a channel route and a jurisdiction check before work is scheduled.
  • Rail approach: Union Pacific track lies 0.2 miles beyond Hallsburg limits, so a route reaching it needs railroad coordination.
  • Electric conduit: Near FM 2957, we confirm the electric line owner before planning a conduit route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a quote near Wilbanks Drive in Hallsburg?

For a Hallsburg quote, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. A route beneath Wilbanks Drive or near Shaw Creek can change the plan, so mark the proposed start, finish and any crossing you already know about.

Price depends on the work at the specific Hallsburg site. A short route through Heiden clay may need staged reaming, while a Shaw Creek crossing adds route and access questions. We also account for footage, pipe or conduit size, utilities to expose, pavement, pits, backfill and excavator time. A crossing at FM 3222 brings highway planning, and the 309 road miles from Yukon affect mobilization.

Questions people ask about boring in Hallsburg

Does Trinity take directional boring jobs in Hallsburg and McLennan County?

Yes, we take directional boring work in Hallsburg and across Texas. Our Yukon office coordinates the job whether our own crews or a vetted partner contractor is on site. For a route near FM 3222, you work with Trinity from the first call through the bore log.

What ground should I expect for a bore through Heiden soil in Hallsburg?

The USDA soil survey maps Heiden soil over 41 percent of Hallsburg, with clay common below the surface. At about 40 inches, 89 percent of the mapped area is clay. That sticky ground can load a reamer and grip pipe, so staged reaming and a controlled pullback matter near Hallsburg Road.

Will a Hallsburg bore hit rock near Shaw Creek?

The soil survey maps bedrock within five feet across 6 percent of Hallsburg, and that mapped bedrock is weathered rather than hard. This does not rule out rock at other depths along Shaw Creek. The route needs site specific review before choosing a bit or setting the bore profile.

Who approves a bore under FM 3222 in Hallsburg?

The utility owner applies for the TxDOT right of way permit, and the TxDOT Waco District reviews it. For a crossing under FM 3222, Trinity supplies the bore plan and profile for the owner’s application. TxDOT cover rules depend on the line type, and the permit can set a different depth.

What does a bore under Union Pacific near Hallsburg require?

Union Pacific track is mapped 0.2 miles outside Hallsburg’s limits, not inside the city. If a planned route crosses that track, the line owner must secure an agreement with the railroad. The railroad sets crossing conditions such as casing, depth and flagging for the work.

Can a line be bored under Shaw Creek in Hallsburg?

A bore can be planned beneath Shaw Creek without cutting the channel bank, but the route and depth need review. Shaw Creek has 0.68 channel miles inside Hallsburg, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Can I call after hours about an urgent bore on Hallsburg Road?

Yes, a person answers Trinity’s phone at (405) 409-7423 24 hours a day. For urgent work near Hallsburg Road, give us the location, the line or conduit involved and the immediate issue so we can discuss the next steps.

How early should I request locates for work near Wilbanks Drive in Hallsburg?

For a bore near Wilbanks Drive, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For Hallsburg work, if the start slips more than 14 days past the original notice, we submit a new request. Refresh marks that wear off or move before work continues.

What affects the cost of directional boring under FM 3222 in Hallsburg?

For Hallsburg, we set the price from the job scope, so the crossing details guide our boring estimate. For FM 3222, highway requirements can add planning; Heiden clay can affect reaming; and Shaw Creek can add a crossing review. Length, pipe size, marked utilities, pavement, pits, backfill and excavator time also matter, as does mobilization from the Yukon office.

Where the Hallsburg facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hallsburg

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hallsburg, Texas

Type the address of your job in Hallsburg. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hallsburg

Same county: Waco · Hewitt · Woodway · McGregor · West · Beverly Hills · Lorena · Moody · Bruceville-Eddy · China Spring · Gholson · Crawford. All counties: Texas county list.