trinityboringsolutions.com

Riesel Texas Directional Boring: Heiden Clay, Texas State Highway 6, Sandy Creek

Quick Answer: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), beneath Texas State Highway 6 and Riesel streets. Fredrick Street is the longest named street, and 39.59 public road miles lie inside the city limits. Our Yukon, Oklahoma main office is 313 road miles away, a mobilization factor for work near Sandy Creek. Heiden clay is common here, so sticky cuttings and pressure control shape the bore plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Riesel bores at a glance

  • Incorporated city in McLennan County, Texas. Population 1,063 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 313 miles, about 6 hours of driving.
  • Ground: Heiden soil is mapped on 37 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: Texas State Highway 6 and FM 1860. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Sandy Creek.
  • Public water: City of Riesel, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Texas State Highway 6 in Riesel?

Trinity Boring Solutions takes directional boring work in Riesel, McLennan County, including routes near Texas State Highway 6. The Census Bureau Vintage 2024 estimate puts Riesel at 1,063, giving us population context for underground planning. Water, sewer, gas, electric conduit and fiber lines can run beneath Fredrick Street or connect properties along FM 1860, with the route planned around marked utilities.

Our main office is in Yukon, Oklahoma, and Riesel work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982, bringing four decades of experience to Riesel’s mapped Heiden clay, where sticky soil affects reaming and pipe pullback. Our family business started in 1965.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Heiden soil affect a directional bore in Riesel?

Riesel’s mapped Heiden clay and Wilson soil mean a bore can meet sticky ground rather than clean sand. The USDA soil survey maps Heiden as 37 percent of the soil series, while Wilson accounts for 33 percent. At about 40 inches below the surface, clay is mapped across 77 percent of the area and average clay content is 46 percent. We treat Riesel’s mapped soil patterns as planning context, not test borings, before setting an underground work approach. Clay can hold an open hole but ball up on a reamer, so staged reaming and a same day pipe pull can help manage the bore.

USDA soil survey, inside the Riesel city limitsWhat is mapped
Soil series mappedHeiden 37 percent, Wilson 33 percent, Riesel 11 percent, Gowen 6 percent and Lamar 5 percent
Texture at the surfaceclay loam 44 percent, clay 38 percent and gravelly fine sandy loam 11 percent
Texture about 40 inches downclay 77 percent, very gravelly clay 11 percent and sandy clay loam 6 percent
Engineering class about 40 inches downfat clay (CH) 77 percent, lean clay (CL) 11 percent and clayey gravel (GC) 11 percent
Average clay content about 40 inches down46 percent
Bedrock mapped within 60 inches1 percent of the area (0 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel77 percent of the area

The USDA soil survey maps bedrock within 60 inches in 1 percent of Riesel, with typical bedrock depth at 49 inches; hard bedrock is not mapped within that depth. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 6 percent of the area, a reason to check creek routes separately. Riesel’s mapped high steel corrosion risk covers 77 percent, and we account for that condition in underground planning. Silty Clay Decomposition Residuum, a Cenozoic unit, and the Phanerozoic Wolfe City Formation are mapped here; the line owner should consider steel casing and tracer wire materials.

How is a bore run through Riesel clay?

Riesel’s clay calls for controlled fluid and staged reaming, not a rushed pull. We plan the bore around Heiden soil, nearby utilities and the route’s surface features.

  1. Because clay covers 77 percent of the mapped area at about 40 inches, we use thinner fluid and staged reaming to limit sticky buildup near Heiden soil.
  2. On a route near Texas State Highway 6, we watch fluid returns and pressure so the clay does not lift pavement during the bore.
  3. Before the drill approaches a marked line near the City of Riesel water system, we hydrovac expose it; surface marks show position, not depth.
  4. We track the drill head from the surface and log depth and pitch as a bore advances near Sandy Creek or Fredrick Street.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads, tracks or creeks can a Riesel bore cross near Sandy Creek?

Texas State Highway 6 and FM 1860 both run within Riesel, so a route crossing either roadway needs careful alignment. Texas State Highway 6 has 8.4 mapped roadway miles in the city, and FM 1860 has 5.4. Fredrick Street is the longest named street at 3.96 miles; Memorial Street runs 2.56 miles and Rattlesnake Road 1.64. Frederick Street is also mapped in the city. A bore can pass beneath pavement without cutting the road, subject to the applicable highway permit and plan.

CrossingTypeMapped extentWho has a say
Texas State Highway 6State highway8.4 roadway miles insideState highway office
FM 1860State highway5.4 roadway miles insideState highway office
Texas State Highway 164Highway nearby1.4 miles outsideState highway office
Union PacificRailroad5.55 track miles insideThe railroad
Sandy CreekStream1.25 channel miles insideChecked for Corps of Engineers jurisdiction
Manos CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Big Sandy CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 5.55 track miles in Riesel on its Fort Worth Subdivision, and 3 mapped street and rail crossings make track proximity a route concern. Crossing the track requires an agreement with Union Pacific. Sandy Creek runs 1.25 channel miles inside the city, and 2 mapped street crossings of named streams call for attention to creek routes. Manos Creek and Big Sandy Creek are also nearby. With no lakes or ponds mapped within one mile of Riesel, we use that fact when planning underground routes.

Do I need a permit to bore in Riesel or McLennan County?

Texas State Highway 6 and FM 1860 are state routes, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Waco District. The utility owner, not our drilling crew, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. A Union Pacific crossing on the Fort Worth Subdivision needs an agreement from the railroad that owns the track. For Sandy Creek, planning includes checking whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Since Riesel is incorporated, we account for city ownership of its streets when planning underground work and permissions.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Riesel water system?

The City of Riesel public water system draws from groundwater wells and reports 492 service connections serving 1,476 people. That water network matters when planning a bore near Memorial Street or Texas State Highway 6. Oncor Electric Delivery Company, Texas New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative report electric service in McLennan County. We confirm the line owner for the specific route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of RieselPublic water systemGroundwater wells492 connections, 1,476 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in McLennan CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Riesel’s median housing year at 1981; 25 percent of homes were built before 1960, and 22 percent in 2000 or later. That mix can mean either replacing an older buried line or adding a new service near Fredrick Street. Before drilling near the City of Riesel water line or a county reported electric line, we use hydrovac potholing to expose marked utilities because locate paint does not show depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Riesel, including Hallsburg?

Riesel is in McLennan County, 15.5 miles east of the county seat, Waco, and has an elevation of 517 feet. Its land area is 4.16 square miles, and ZIP code 76682 serves the city. Hallsburg is 4.3 miles north; Mart is 8.2 miles northeast, Golinda 10.4 miles southwest and Robinson 10.6 miles west. The Yukon, Oklahoma main office is 313 road miles away, about a 6.0 hour drive, which makes mobilization part of planning for work near Texas State Highway 6.

Places near Riesel

Which jobs call for a bore along Fredrick Street in Riesel?

  • Highway crossing: A route beneath Texas State Highway 6 uses a bore under the pavement, with the utility owner’s TxDOT permit covering the right of way.
  • Water service: A connection near Memorial Street can be routed toward the City of Riesel groundwater system after existing lines are exposed.
  • Fiber route: A conduit bore along Fredrick Street can avoid opening pavement while following the marked route and checking nearby utilities.
  • Creek crossing: A Sandy Creek bore is planned below the channel, with jurisdiction checked during crossing planning.
  • Rail crossing: A route beneath Union Pacific’s Fort Worth Subdivision needs the railroad’s agreement for the crossing.
  • Street service: A bore near Rattlesnake Road can carry water, sewer or conduit beneath the street rather than cutting across its surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Frederick Street in Riesel?

For a bore near Frederick Street, start with the address or a map pin, then tell us what will go underground, such as a water service near the City of Riesel system. Give us the pipe or conduit size and the length; a sketch or plans help show how the route meets Texas State Highway 6 or a nearby utility.

The Yukon yard is 313 road miles from Riesel, so mobilization matters alongside the work itself. Heiden clay can affect fluid and reaming; a route near Texas State Highway 6 or Union Pacific track adds crossing details. Price also reflects line size and length, utilities to expose, pavement or concrete, creek crossings, pits, excavator time and sand backfill. High profile or emergency work can change the planning and equipment needs.

Questions people ask about boring in Riesel

Does Trinity Boring Solutions take directional boring jobs in Riesel and McLennan County?

Yes. We take directional boring work in Riesel, and our own crews or partner contractor crews vetted by Trinity handle the field work. Our main office remains in Yukon, Oklahoma, while we stay involved from the first call through the bore log. A route near Sandy Creek or Texas State Highway 6 can be planned from the site details.

As we plan in Riesel, who runs its public water system and where does the water come from?

The City of Riesel owns the public water system, which gets its water from groundwater wells. It reports 492 service connections and 1,476 people served. A bore near Memorial Street should account for this buried network, and we expose marked lines before drilling close to them.

Which electric companies serve Riesel in McLennan County, and who confirms conduit specs?

Oncor Electric Delivery Company, Texas New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative report service in McLennan County. That list does not identify the provider at every Riesel address. The line owner confirms conduit requirements for a specific route, such as one near Texas State Highway 6.

Who controls Riesel streets like Rattlesnake Road, and must a bore cut the pavement?

Riesel is incorporated, so the city has its city streets, including Rattlesnake Road. A bore can pass beneath pavement without cutting it, with entry and exit pits placed off the roadway where the site allows. A route in Texas State Highway 6 right of way follows the separate TxDOT permit process.

Do older homes near Memorial Street mean replacement bores in Riesel?

They can mean a project is replacing an older buried line, though the housing figures do not establish the age of any individual pipe. The American Community Survey 2019 to 2023 estimates give Riesel a median housing year of 1981, with 25 percent of homes built before 1960. New services near Memorial Street may need a different route.

Does Heiden soil in Riesel corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 77 percent of Riesel, including areas with Heiden clay. The line owner chooses materials and any coatings for steel casing or tracer wire. HDPE does not share the soil corrosion concern, but the right pipe depends on the line and its design.

How early should I call Texas811 for a Riesel bore near Fredrick Street?

For a bore near Fredrick Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. The ticket has a 20 day life. If the start slips more than 14 days past the original notice, request a new ticket; have worn or moved marks refreshed before work continues.

How far is Riesel from Trinity’s Yukon office, and does Robinson change the job?

Riesel is 313 road miles from our Yukon, Oklahoma main office, about a 6.0 hour drive. That distance can affect mobilization, while Robinson is 10.6 miles west of Riesel and may help describe a route location. The bore plan still depends on the address, Heiden soil and nearby crossings such as Union Pacific track.

What affects the cost of a Riesel bore under Texas State Highway 6?

A bore beneath Texas State Highway 6 is priced around the actual scope, not the highway name alone. Length and pipe size matter, as do Heiden clay, utilities to expose, pavement, pits, equipment time and the permit route. Union Pacific or Sandy Creek crossings can add planning needs, and the 313 road miles from Yukon affect mobilization.

Where the Riesel facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Riesel

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Riesel, Texas

Type the address of your job in Riesel. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Riesel

Same county: Waco · Hewitt · Bellmead · Woodway · Lacy-Lakeview · McGregor · West · Beverly Hills · Lorena · Moody · Bruceville-Eddy · China Spring. All counties: Texas county list.